Change-Id: I7e5c55259159752882c8ae056e08f9bec12b3c02

The XML readers and writers, both parallel and serial, now work
with the pipeline changes. Now, all writers work with pieces
even though the structured ones can handle asking for a sub-
extent.

Change-Id: I9f757ba12a3b9fb84e141506dacadad608eb8b99

Refactoring the way VTK goes between piece and structured
extents. Before, extent translators were used when the pipeline
moved from structured to unstructured data converting piece
request to extent request. This caused many problems with filters
that altered extents, mainly a lot of redundant IO due to
repartitioning of different extents. This became extremely
cumbersome to manage when running distributed. The new behavior
pushes the extent translation all to way to the readers and
only when readers are able to read a subset. This works much
better. The only downside is that filters need to be able to
handle data extents different than update extents. Most filters
can do this but many imaging filters cannot. Those that are
needed in parallel will have to be updated.

As part of this work, I also removed MAXIMUM_NUMBER_OF_PIECES
and added CAN_HANDLE_PIECE_REQUEST. MAXIMUM_NUMBER_OF_PIECES had
reduced to being a boolean. 1 for serial sources, -1 for parallel
sources. I removed it and added a CAN_HANDLE_PIECE_REQUEST instead.
This key, produced by a source, tells the executive that a source is
able to handle piece request. It is a source only key produced in
RequestInformation and is not propagated downstream. If this key is
not present, the executive will only execute the source for piece 0
to produce the entire data. It is then up to the user to add a filter
that splits the data for other piece requests. The only exception to
this is when CAN_PRODUCE_SUB_EXTENT is present, in which case the
executive will split using an extent translator AT THE source - not
downstream.

Conflicts:
	Filters/FlowPaths/vtkParticleTracerBase.cxx

Change-Id: I8db4040289ff87331adeecded4a738313d9b52df

86cfbf4d Catalyst Web - Composite improvement

Add event notification and search result pagination.

Change-Id: I3c63620261fc2d6503369d2cfca3c5a851ada033

00bb43b9 Fix bad check for incomplete polygons, fix div-by-zero.

Jacob Becker authored 10 years ago and David Gobbi committed 10 years ago

When only one polyline was left, it would erroneously not be pushed
onto the "incomplete" list.

Also, a vector normalization had no check for division-by-zero, causing
a NaN if the vector length was zero.

Change-Id: I36a9b7a3561e6a490c795806e1b35c10de44a446

64a98b47 testing: add some missing TEST_DEPENDS

622d753a Allow custom Interaction/Widgets test timeouts

Change-Id: Idf4f870e2046dafe3c5bf8aa2ca9c5f2f6d79a37

Create VTK_TEST_TIMEOUT_<test> settings that can be configured
locally to increase the default timeout for tests:

  TerrainPolylineEditor
  TestPickingManagerSeedWidget

Use the existing test timeouts as the default values.

Change-Id: I827078610fff305d24f690f7a278a6503ef32daa

ba7959d8 Fix bug in picking of invisible props in an assembly.

* pvvtk/pv-master:

Change-Id: Ie19e8db2d9377fa797cdfa277e1ba460b3b4d1d7

Utkarsh Ayachit authored 10 years ago and Kitware Robot committed 10 years ago

c19112e5 Remove OpenGL error checks that were causing errors.

ddf898ae Bad null pointer check in vtkBSplineTransform.

The ForwardTransformPoint method was missing a "!" in a null pointer
check, causing the transform to perform an identity transform.  The
tests for this class did not cover this code path, even though it is
the most common path in the general usage of this class.  A new test
has been added, and an old test has been re-enabled.

Also, add the missing GetDisplacementScale method.

Change-Id: I3cc21fda11e4c4f0a83dc020e0e9968086246d45

c5333aac Allow Dax marching cubes and threshold to work with doubles.
c29aa732 Dax marching cubes now uses input array not active scalars.

Change-Id: I289624b773f148eb530e58c745f4150297e20170

The superclass still has the problem of only getting the active
scalars rather than the input array. It would be good if this were
fixed. It might be even better if vtkDaxMarchingCubes inherited from
vtkContour instead. This class both handles the input array correctly
and has better implementations of the contour algorithm.

Change-Id: Iac333cb5019b28f7fb4bf2fb62e28b898593491f

ff7c659b Allow configuration of external module dependency locations

1d7b0a7b Change GetInputConnection error message into a debug warning message
c62a84d8 Prevent error message when deep copying vtkGridTransform

94f37904 Fix Windows compilation warning.

Change-Id: I025243fb80ebb5504aecfaee201ef828b5bd94dd

5782e17b Views/Infovis: Add another baseline for TestConeLayoutStrategy

The Mesa Gallium 'swrast' driver combines pixel-wide overlapping lines
differently, but validly.  Add a baseline representing its result.

Change-Id: I31973e8a6b6776fdb322f6efa8c09b3ac9446525

063b174d vtkMultiProcessStream: Add insert and extract operators for bool

Change-Id: I9c2c618373600e289b4917fa03fd042359099d67

Teach the vtk_module_export_code_find_package macro to check for a
VTK_INSTALL_FIND_PACKAGE_<name>_DIR variable to configure the default
location of <name>_DIR to be reported to applications.  Allow the
variable to be set to a false value to disable the default.  This will
allow module dependencies on external packages such as Qt5 to be
configured for redistributable/relocatable packages.

Also allow applications to set <name>_DIR themselves before finding
VTK so that they can override the VTK-provided default location.

Change-Id: I0e452fb02f371636ec3a04954a99e33c7193f77a

c19112e5 Remove OpenGL error checks that were causing errors.

The OpenGL error checks in those code itself raise OpenGL errors when
this code was called while building a display list (tracked using
bugle). Checks in this API is an overkill anyways. The called code
should to the checking if needed.

Change-Id: If1daaaa9a7c8c4131a11c2b6d52a10b9a18a162f

4ffb1c50 fix failing R tests reported by CDash

050c2df6 Fix warning about trailing comma in enum list.

Change-Id: I82f4b76f30f7b7b57c6050727a5927516791a2d4
Clang: commas at the end of enumerator list are a C++11 extension
[-Wc++11-extensions]

23fbbebc Export the locations of Qt5 packages on which modules depend

21f10c8c Clean up vtkMedicalImageProperties PrintSelf.

This commit should resolve any "R is already initialized" errors.

Change-Id: Ie1814e1dffaa1a975b5305df0a1a66d3edff5304

21d92cf5 change the way we shut down the R interface
b77eff3c fix potential segmentation fault

Change-Id: Ide8b69796a73b910d877a9c716de9e93f63fa29b

Change-Id: I99c13233c9870f25b34947e071a9a23e33d710c2

Qt5 packages provide libraries to VTK in the form of imported targets.
VTK libraries that link to them get exported with dependencies on the
imported targets.  We must make them available to applications that link
to these VTK libraries too.

Teach each module that depends on Qt5 to export code that runs when
an application loads the module as part of its build process.  Find
the needed Qt5 package on behalf of the application to satisfy the
module's dependency on it.

Change-Id: Ib638ccafa084fbb06c20eb09464265501ccafc80