out of place cmake

Makefile.in

+srcdir        = @srcdir@
+VPATH         = @srcdir@
+
+CMAKE_CONFIG_DIR = @CMAKE_CONFIG_DIR@
+
+all:
+	cd Source; ${MAKE}
+
+
+

configure.in

+# Process this file with autoconf to produce a configure script.
+AC_INIT()
+
+AC_CONFIG_HEADER(Source/cmConfigure.h)
+
+CMAKE_CONFIG_DIR=`pwd`
+AC_SUBST(CMAKE_CONFIG_DIR)
+
+#
+# check for some programs we use
+#
+AC_PROG_CC
+AC_PROG_CXX
+AC_PROG_RANLIB
+AC_PROG_INSTALL
+AC_PATH_XTRA
+
+fullSrcDir=`cd $srcdir; pwd`
+CMAKE_ROOT_DIR=$fullSrcDir
+AC_SUBST(CMAKE_ROOT_DIR)
+
+# get byte swapping info
+AC_C_BIGENDIAN
+if test $ac_cv_c_bigendian = yes; then
+  CMAKE_WORDS_BIGENDIAN=1
+fi
+AC_SUBST(CMAKE_WORDS_BIGENDIAN)
+
+
+# some stuff Tcl uses
+#
+AC_CHECK_HEADER(limits.h, HAVE_LIMITS_H=-DHAVE_LIMITS_H,HAVE_LIMITS_H="")
+AC_SUBST(CMAKE_HAVE_LIMITS_H)
+AC_HAVE_HEADERS(unistd.h, HAVE_UNISTD_H=-DHAVE_UNISTD_H,HAVE_UNISTD_H="")
+AC_SUBST(CMAKE_HAVE_UNISTD_H)
+
+# Step 1: set the variable "system" to hold the name and version number
+# for the system.  This can usually be done via the "uname" command, but
+# there are a few systems, like Next, where this doesn't work.
+
+AC_MSG_CHECKING([system version (for dynamic loading)])
+if test -f /usr/lib/NextStep/software_version; then
+  system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version`
+else
+    system=`uname -s`-`uname -r`
+    if test "$?" -ne 0 ; then
+	AC_MSG_RESULT([unknown (can't find uname command)])
+	system=unknown
+    else
+	# Special check for weird MP-RAS system (uname returns weird
+	# results, and the version is kept in special file).
+    
+	if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then
+	    system=MP-RAS-`awk '{print $3}' /etc/.relid'`
+	fi
+	AC_MSG_RESULT($system)
+    fi
+fi
+
+#
+# use shared libs
+#
+
+
+CMAKE_shared_ok="yes"
+# the following is an excerpt from the tcl7.5b2 configure.in
+#--------------------------------------------------------------------
+#	The statements below define a collection of symbols related to
+#	dynamic loading and shared libraries:
+#
+#	CMAKE_SHLIB_CFLAGS -	Flags to pass to cc when compiling the components
+#			of a shared library (may request position-independent
+#			code, among other things).
+#	CMAKE_SHLIB_LD_LIBS -	Dependent libraries for the linker to scan when
+#			creating shared libraries.  This symbol typically
+#			goes at the end of the "ld" commands that build
+#			shared libraries. The value of the symbol if
+#			"${LIBS}" if all of the dependent libraries should
+#			be specified when creating a shared library.  If
+#			dependent libraries should not be specified (as on
+#			SunOS 4.x, where they cause the link to fail, or in
+#			general if Tcl and Tk aren't themselves shared
+#			libraries), then this symbol has an empty string
+#			as its value.
+#	CMAKE_SHLIB_SUFFIX -	Suffix to use for the name of the shared library.  An
+#			empty string means we don't know how to use shared
+#			libraries on this platform.
+#	CMAKE_SHLIB_BUILD_FLAGS -
+#                       Flags to use when building a shared library.	
+#	CMAKE_SHLIB_LINK_FLAGS -	
+#                       Flags to pass to the compiler when linking object
+#			files into an executable application binary such
+#			as tclsh.
+#--------------------------------------------------------------------
+
+
+# Step 2: check for existence of -ldl library.  This is needed because
+# Linux can use either -ldl or -ldld for dynamic loading.
+
+AC_CHECK_LIB(dl, dlopen, have_dl=yes, have_dl=no)
+
+# Step 4: set configuration options based on system name and version.
+
+fullSrcDir=`cd $srcdir; pwd`
+AC_SUBST(fullSrcDir)
+case $system in
+    AIX-*)
+	# AIX: can't link shared library extensions unless Tcl and Tk are
+	# also shared libraries.
+	CMAKE_SHLIB_CFLAGS=""
+	CMAKE_SHLIB_LD_LIBS='${LIBS}'
+	CMAKE_SHLIB_SUFFIX="..o"
+	CMAKE_DL_LIBS=""
+        AC_CHECK_LIB(ld,printf, CMAKE_DL_LIBS="-lld")
+	CMAKE_SHLIB_LINK_FLAGS=""
+	;;
+    HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*)
+	CMAKE_SHLIB_CFLAGS="+z"
+	CMAKE_SHLIB_LD_LIBS=""
+	CMAKE_SHLIB_SUFFIX=".sl"
+	CMAKE_DL_LIBS="-ldld"
+	CMAKE_SHLIB_BUILD_FLAGS='+Z -Wl,-E -Wl,-b'
+	CMAKE_SHLIB_LINK_FLAGS='-Wl,+s -Wl,+b,${LIB_RUNTIME_DIR}'
+        if test "$CC" = "gcc" -o `$CC -v 2>&1 | grep -c gcc` != "0" ; then
+  	  CMAKE_SHLIB_BUILD_FLAGS='-shared -Wl,-E -Wl,-b'
+	  CMAKE_SHLIB_LINK_FLAGS='-Wl,+s -Wl,+b,${LIB_RUNTIME_DIR}'
+        fi
+	;;
+    IRIX-5.*)
+	CMAKE_SHLIB_CFLAGS=""
+	CMAKE_SHLIB_LD_LIBS=""
+	CMAKE_SHLIB_SUFFIX=".so"
+	CMAKE_DL_LIBS=""
+	CMAKE_SHLIB_BUILD_FLAGS="-shared -rdata_shared"
+	;;
+    IRIX-6* | IRIX64-6* | IRIX-64-6*)
+	CMAKE_SHLIB_CFLAGS=""
+	CMAKE_SHLIB_LD_LIBS=""
+	CMAKE_SHLIB_SUFFIX=".so"
+	CMAKE_DL_LIBS=""
+	CMAKE_SHLIB_BUILD_FLAGS="-shared -rdata_shared"
+	;;
+    Linux*)
+	CMAKE_SHLIB_CFLAGS="-fPIC"
+	CMAKE_SHLIB_LD_LIBS=""
+	CMAKE_SHLIB_SUFFIX=".so"
+	CMAKE_SHLIB_BUILD_FLAGS="-shared"
+	if test "$have_dl" = yes; then
+	    CMAKE_DL_LIBS="-ldl"
+	    CMAKE_SHLIB_LINK_FLAGS="-rdynamic"
+	else
+	    AC_CHECK_HEADER(dld.h, [
+		CMAKE_DL_LIBS="-ldld"
+		CMAKE_SHLIB_LINK_FLAGS=""])
+	fi
+	;;
+    CYGWIN_NT*)
+        CMAKE_SHLIB_CFLAGS=""
+        CMAKE_DL_LIBS="-lgdi32" 
+        CMAKE_SHLIB_SUFFIX=".dll"
+        CMAKE_SHLIB_LINK_FLAGS="-shared"
+        ;;
+    MP-RAS-02*)
+	CMAKE_SHLIB_CFLAGS="-K PIC"
+	CMAKE_SHLIB_LD_LIBS=""
+	CMAKE_SHLIB_SUFFIX=".so"
+	CMAKE_DL_LIBS="-ldl"
+	CMAKE_SHLIB_LINK_FLAGS=""
+	;;
+    MP-RAS-*)
+	CMAKE_SHLIB_CFLAGS="-K PIC"
+	CMAKE_SHLIB_LD_LIBS=""
+	CMAKE_SHLIB_SUFFIX=".so"
+	CMAKE_DL_LIBS="-ldl"
+	CMAKE_SHLIB_LINK_FLAGS="-Wl,-Bexport"
+	;;
+    NetBSD-*|FreeBSD-*)
+	# Not available on all versions:  check for include file.
+	if test -f /usr/include/dlfcn.h; then
+	    CMAKE_SHLIB_CFLAGS="-fpic"
+	    CMAKE_SHLIB_LD_LIBS=""
+	    CMAKE_SHLIB_SUFFIX=".so"
+	    CMAKE_DL_LIBS=""
+	    CMAKE_SHLIB_LINK_FLAGS="-shared"
+	else
+	    CMAKE_SHLIB_CFLAGS=""
+	    CMAKE_SHLIB_LD_LIBS=""
+	    CMAKE_SHLIB_SUFFIX="..o"
+	    CMAKE_DL_LIBS=""
+	    CMAKE_SHLIB_LINK_FLAGS=""
+	fi
+	;;
+    NEXTSTEP-*)
+	CMAKE_SHLIB_CFLAGS=""
+	CMAKE_SHLIB_LD_LIBS=""
+	CMAKE_SHLIB_SUFFIX=".so"
+	CMAKE_DL_LIBS=""
+	CMAKE_SHLIB_LINK_FLAGS=""
+	;;
+    OSF1-1.[012])
+	# OSF/1 1.[012] from OSF, and derivatives, including Paragon OSF/1
+	CMAKE_SHLIB_CFLAGS=""
+	# Hack: make package name same as library name
+	CMAKE_SHLIB_LD_LIBS=""
+	CMAKE_SHLIB_SUFFIX=".so"
+	CMAKE_DL_LIBS=""
+	CMAKE_SHLIB_LINK_FLAGS=""
+	;;
+    OSF1-1.*)
+	# OSF/1 1.3 from OSF using ELF, and derivatives, including AD2
+	CMAKE_SHLIB_CFLAGS="-fpic"
+	CMAKE_SHLIB_LD_LIBS=""
+	CMAKE_SHLIB_SUFFIX=".so"
+	CMAKE_DL_LIBS=""
+	CMAKE_SHLIB_LINK_FLAGS=""
+	;;
+    OSF1-V*)
+        # Digital OSF/1
+	CMAKE_SHLIB_CFLAGS=""
+	CMAKE_SHLIB_LD_LIBS=""
+	CMAKE_SHLIB_SUFFIX=".so"
+	CMAKE_DL_LIBS=""
+	CMAKE_SHLIB_BUILD_FLAGS='-shared -Wl,-expect_unresolved,"*"'
+	CMAKE_SHLIB_LINK_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
+	;;
+    RISCos-*)
+	CMAKE_SHLIB_CFLAGS="-G 0"
+	CMAKE_SHLIB_LD_LIBS=""
+	CMAKE_SHLIB_SUFFIX="..o"
+	CMAKE_DL_LIBS=""
+	CMAKE_SHLIB_LINK_FLAGS="-Wl,-D,08000000"
+	;;
+    SCO_SV-3.2*)
+        # Note, dlopen is available only on SCO 3.2.5 and greater.  However,
+        # this test works, since "uname -s" was non-standard in 3.2.4 and
+        # below.
+	CMAKE_SHLIB_CFLAGS="-Kpic -belf"
+	CMAKE_SHLIB_LD_LIBS=""
+	CMAKE_SHLIB_SUFFIX=".so"
+	CMAKE_DL_LIBS=""
+	CMAKE_SHLIB_LINK_FLAGS="-belf -Wl,-Bexport"
+	;;
+     SINIX*5.4*)
+	CMAKE_SHLIB_CFLAGS="-K PIC"
+	CMAKE_SHLIB_LD_LIBS=""
+	CMAKE_SHLIB_SUFFIX=".so"
+	CMAKE_DL_LIBS="-ldl"
+	CMAKE_SHLIB_LINK_FLAGS=""
+	;;
+    SunOS-4*)
+	CMAKE_SHLIB_CFLAGS="-PIC"
+	CMAKE_SHLIB_LD_LIBS=""
+	CMAKE_SHLIB_SUFFIX=".so"
+	CMAKE_DL_LIBS="-ldl"
+	CMAKE_SHLIB_BUILD_FLAGS='-shared -Wl,-r -nostdlib'
+	CMAKE_SHLIB_LINK_FLAGS='-Wl,-L${LIB_RUNTIME_DIR}'
+	;;
+    SunOS-5*)
+	CMAKE_SHLIB_CFLAGS="-KPIC"
+	CMAKE_SHLIB_LD_LIBS='${LIBS}'
+	CMAKE_SHLIB_SUFFIX=".so"
+	CMAKE_DL_LIBS="-ldl"
+	CMAKE_SHLIB_BUILD_FLAGS='-G'
+	CMAKE_SHLIB_LINK_FLAGS='-R ${LIB_RUNTIME_DIR}'
+        if test "$CC" = "gcc" -o `$CC -v 2>&1 | grep -c gcc` != "0" ; then
+	  CMAKE_SHLIB_BUILD_FLAGS='-Wl,-G'
+	  CMAKE_SHLIB_LINK_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
+        fi
+	;;
+    ULTRIX-4.*)
+	CMAKE_SHLIB_CFLAGS="-G 0"
+	CMAKE_SHLIB_SUFFIX="..o"
+	CMAKE_SHLIB_LD_LIBS=""
+	CMAKE_DL_LIBS=""
+	CMAKE_SHLIB_LINK_FLAGS="-Wl,-D,08000000"
+	;;
+    UNIX_SV*)
+	CMAKE_SHLIB_CFLAGS="-K PIC"
+	CMAKE_SHLIB_LD_LIBS=""
+	CMAKE_SHLIB_SUFFIX=".so"
+	CMAKE_DL_LIBS="-ldl"
+	CMAKE_SHLIB_LINK_FLAGS="-Wl,-Bexport"
+	;;
+esac
+export CMAKE_SHLIB_SUFFIX
+
+# If we're running gcc, then change the C flags for compiling shared
+# libraries to the right flags for gcc, instead of those for the
+# standard manufacturer compiler.
+if test "$CC" = "gcc" -o `$CC -v 2>&1 | grep -c gcc` != "0" ; then
+  CMAKE_SHLIB_CFLAGS="-fPIC"
+fi
+# if running on cygwin remove -fPIC flag
+case $system in 
+  CYGWIN_NT*)
+    CMAKE_SHLIB_CFLAGS=""
+    ;;
+esac
+
+CMAKE_SHLIB_CFLAGS="${SHLIB_CFLAGS}"
+CMAKE_LD_SEARCH_FLAGS="${LD_SEARCH_FLAGS}"
+
+
+AC_SUBST(CMAKE_SHLIB_LINK_FLAGS)
+AC_SUBST(CMAKE_SHLIB_BUILD_FLAGS)
+AC_SUBST(CMAKE_SHLIB_CFLAGS)
+AC_SUBST(CMAKE_LIB_EXT)
+AC_SUBST(CMAKE_DL_LIBS)
+AC_SUBST(CMAKE_SHLIB_LD_LIBS)
+AC_SUBST(CMAKE_SHLIB_SUFFIX)
+
+
+##########################
+##			##
+## Check thread support ##
+##			##
+##########################
+# initialize thread vars
+CMAKE_THREAD_LIBS=""
+use_sproc=no
+CMAKE_USE_SPROC=0
+CMAKE_USE_PTHREADS=0
+CMAKE_HP_PTHREADS=0
+
+##########################
+##                      ##
+##      sproc           ##
+##                      ##
+##########################
+# check for sproc
+force_sproc=no
+AC_ARG_WITH(sproc,
+         [  --with-sproc           use sproc instead of pthreads if possible],
+         if test "$withval" = yes; then
+         force_sproc=yes
+         fi,)
+
+
+
+AC_CHECK_HEADERS(sys/prctl.h, [use_sproc=yes])
+if test "$use_sproc" = "yes"; then
+case $system in
+    Linux* | IRIX64-6.5 | IRIX-6.5) 
+        if test "$force_sproc" = "yes"; then
+           CMAKE_USE_SPROC=1
+        else
+	  use_sproc=no
+    	fi
+	;;
+    IRIX*)
+	CMAKE_USE_SPROC=1
+	;;
+esac
+fi
+use_pthreads=no
+AC_CHECK_HEADERS(pthread.h, [use_pthreads=yes])
+if test "$use_pthreads" = "yes"; then
+  if test "$use_sproc" = "no"; then
+    AC_CHECK_LIB(pthreads, pthread_create, CMAKE_THREAD_LIBS="-lpthreads")
+    AC_CHECK_LIB(pthread, pthread_create, CMAKE_THREAD_LIBS="-lpthread")
+# Work around Solaris 5.6 and 5.7 bug:
+    if test "`uname -s -r`" = "SunOS 5.6"; then
+      AC_CHECK_LIB(thread, thr_create, CMAKE_THREAD_LIBS="$CMAKE_THREAD_LIBS -lthread")
+    fi
+    if test "`uname -s -r`" = "SunOS 5.7"; then
+      AC_CHECK_LIB(thread, thr_create, CMAKE_THREAD_LIBS="$CMAKE_THREAD_LIBS -lthread")
+    fi
+	CMAKE_USE_PTHREADS=1
+  fi
+fi
+
+# on an HP with pthread we need to use -lcma
+# on dec alphas we have had problems as well
+if test "$use_pthreads" = "yes"; then
+case $system in
+    HP-UX-*.10.*)
+	CMAKE_THREAD_LIBS="-lcma"
+	CMAKE_USE_PTHREADS=1 
+	CMAKE_HP_PTHREADS=1
+	;;
+    OSF1-V*)
+	CMAKE_USE_PTHREADS=0
+        CMAKE_THREAD_LIBS=""
+        ;;
+    FreeBSD*)
+	CMAKE_USE_PTHREADS=0
+	CMAKE_THREAD_LIBS=""
+	;;
+esac
+fi
+
+
+AC_SUBST(CMAKE_USE_SPROC)
+AC_SUBST(CMAKE_USE_PTHREADS)
+AC_SUBST(CMAKE_HP_PTHREADS)
+AC_SUBST(CMAKE_THREAD_LIBS)
+
+
+CMAKE_ANSI_CFLAGS=""
+# on hp use -Aa for ansi
+if test $ac_cv_prog_gxx = no; then
+case $system in
+    HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*)
+        echo $ac_n "checking whether ${CC} accepts -Aa""... $ac_c" 1>&6
+        echo 'void f(){}' > conftest.c
+        if test -z "`${CC} -Aa -c conftest.c 2>&1`"; then
+          echo "$ac_t""yes" 1>&6
+          CMAKE_ANSI_CFLAGS="-Aa"
+        else
+          echo "$ac_t""no" 1>&6
+        fi
+        rm -f conftest*
+	;;
+esac
+fi
+AC_SUBST(CMAKE_ANSI_CFLAGS)
+
+# if we are not running g++ then we might need some other flags
+# to get the templates compiled correctly
+CMAKE_TEMPLATE_FLAGS=""
+if test $ac_cv_prog_gxx = no; then
+    echo $ac_n "checking whether ${CXX} accepts -ptused -no_prelink""... $ac_c" 1>&6
+  echo 'void f(){}' > conftest.cc
+  if test -z "`${CXX} -ptused -no_prelink -c conftest.cc 2>&1`"; then
+    echo "$ac_t""yes" 1>&6
+    CMAKE_TEMPLATE_FLAGS="-ptused -no_prelink"
+  else
+    echo "$ac_t""no" 1>&6
+  fi
+  rm -f conftest*
+  echo $ac_n "checking whether ${CXX} accepts -instances=semiexplicit""... $ac_c" 1>&6
+  echo 'void f(){}' > conftest.cc
+  if test -z "`${CXX} -instances=static -c conftest.cc 2>&1`"; then
+    echo "$ac_t""yes" 1>&6
+    CMAKE_TEMPLATE_FLAGS="-instances=static"
+  else
+    echo "$ac_t""no" 1>&6
+  fi
+fi
+AC_SUBST(CMAKE_TEMPLATE_FLAGS)
+
+# check no g++ compilers to see if they have the standard 
+# ansi stream files (without the .h)
+if test $ac_cv_prog_gxx = no; then
+  AC_MSG_CHECKING( ansi standard C++ stream headers ) 
+  echo "******"
+  rm -rf conftest.*
+  cat > conftest.cc <<!
+#include <iostream>
+!
+  if test -z "`${CXX} -c conftest.cc 2>&1`"; then
+    echo "$ac_t""yes" 1>&6
+  else
+    AC_DEFINE(CMAKE_NO_STD_NAMESPACE)
+    echo "$ac_t""no" 1>&6
+  fi
+fi
+
+# check to see if stl is in the std namespace
+if test $ac_cv_prog_gxx = no; then
+  echo "******"
+  AC_MSG_CHECKING( ansi standard namespace support ) 
+  rm -rf conftest.*
+  cat > conftest.cc <<!
+#include <list>
+void foo() { std::list<int> l; }
+!
+  if test -z "`${CXX} -c conftest.cc 2>&1`"; then
+    echo "$ac_t""yes" 1>&6
+  else
+    AC_DEFINE(CMAKE_NO_ANSI_STREAM_HEADERS)
+    echo "$ac_t""no" 1>&6
+  fi
+fi
+
+
+if test "$CC" = "gcc" -o `$CC -v 2>&1 | grep -c gcc` != "0" ; then
+  SHLIB_CFLAGS="-fPIC"
+fi
+
+# find make to use to build cmake, prefer gmake
+AC_PATH_PROGS(RUNMAKE, gmake make)
+AC_PATH_PROGS(CMAKE_AR, ar)
+AC_SUBST(CMAKE_AR)
+
+# generate output files.
+# create mkdir files just to make some of the directories
+
+AC_OUTPUT(Makefile Source/Makefile)
+

install-sh

+#!/bin/sh
+
+#
+# install - install a program, script, or datafile
+# This comes from X11R5; it is not part of GNU.
+#
+# $XConsortium: install.sh,v 1.2 89/12/18 14:47:22 jim Exp $
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+#
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir -p}"
+
+instcmd="$mvprog"
+chmodcmd=""
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+mkdir=n
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd="$cpprog"
+	    shift
+	    continue;;
+
+	-d) instcmd="$mkdirprog"
+	    mkdir=y
+	    src="/dev/null"
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd="$stripprog"
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "install:  no input file specified"
+	exit 1
+fi
+
+if [ x"$dst" = x ]
+then
+	echo "install:  no destination specified"
+	exit 1
+fi
+
+
+if [ $mkdir = y ]; then
+	$doit $instcmd $dst
+	dsttmp=$dst
+else
+
+	# If destination is a directory, append the input filename; if your
+	# system does not like double slashes in filenames, you may need to
+	# add some logic
+
+	if [ $mkdir = n -a -d $dst ]
+	then
+		dst="$dst"/`basename $src`
+	fi
+
+	# Make a temp file name in the proper directory.
+	
+	dstdir=`dirname $dst`
+	dsttmp=$dstdir/#inst.$$#
+
+	# Move or copy the file name to the temp name
+
+	$doit $instcmd $src $dsttmp
+fi
+	
+# and set any options; do chmod last to preserve setuid bits
+
+if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; fi
+if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; fi
+if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; fi
+if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; fi
+
+if [ $mkdir = n ]; then
+	# Now rename the file to the real destination.
+	
+	$doit $rmcmd $dst
+	$doit $mvcmd $dsttmp $dst
+fi
+
+exit 0