# Copyright 2013 Velodyne Acoustics, Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

import os
import csv
import datetime
import math
import paraview.simple as smp
from paraview import servermanager
from paraview import vtk

import PythonQt
from PythonQt import QtCore, QtGui

from vtk import vtkXMLPolyDataWriter
import lidarviewcore.kiwiviewerExporter as kiwiviewerExporter
import lidarview.gridAdjustmentDialog as gridAdjustmentDialog
import lidarview.aboutDialog as aboutDialog
import bisect

from PythonQt.paraview import vvCropReturnsDialog, vvSelectFramesDialog

# import the vtk wrapping of the Lidar Plugin
# this enable to get the specific vtkObject behind a proxy via GetClientSideObject()
# without this plugin, GetClientSideObject(), would return the first mother class known by paraview
import LidarPlugin.LidarCore  # NOQA

import lidarview.planefit as planefit

class AppLogic(object):

    def __init__(self):
        self.createStatusBarWidgets()

        mainView = smp.GetActiveView()
        self.mainView = mainView

        self.transformMode = 0
        self.relativeTransform = False

        self.reader = None
        self.trailingFrame = []
        self.position = None
        self.sensor = None

        self.gridProperties = None

    def createStatusBarWidgets(self):

        self.logoLabel = QtGui.QLabel()
        self.logoLabel.setPixmap(QtGui.QPixmap(":/vvResources/SoftwareInformation/bottom_logo.png"))
        self.logoLabel.setScaledContents(True)

        self.filenameLabel = QtGui.QLabel()
        self.statusLabel = QtGui.QLabel()
        self.sensorInformationLabel = QtGui.QLabel()
        self.positionPacketInfoLabel = QtGui.QLabel()

class GridProperties:

    def __init__(self):
        self.Normal = [0, 0, 0]
        self.Origin = [0, 0, 0]
        self.Scale = 0
        self.GridNbTicks = 0
        self.LineWidth = 0
        self.Color = [0, 0, 0]
        self.Persist = False

# Array Helper
def hasArrayName(sourceProxy, arrayName):
    '''
    Returns True if the data has non-zero points and has a point data
    attribute with the given arrayName.
    '''
    if not sourceProxy:
        return False

    info = sourceProxy.GetDataInformation().DataInformation

    if info.GetNumberOfPoints() == 0:
        return False

    info = info.GetAttributeInformation(0)
    for i in range(info.GetNumberOfArrays()):
        if info.GetArrayInformation(i).GetName() == arrayName:
            return True
    return False

# Used by lqLidarViewManager
def openData(filename):

    onClose()

    reader = smp.OpenDataFile(filename, guiName='Data')

    if not reader:
        return

    rep = smp.Show(reader)
    rep.InterpolateScalarsBeforeMapping = 0
    setDefaultLookupTables(reader)

    showSourceInSpreadSheet(reader)

    smp.GetActiveView().ViewTime = 0.0

    app.reader = reader
    app.filenameLabel.setText('File: %s' % os.path.basename(filename))

    enableSaveActions()
    app.actions['actionSavePCAP'].setEnabled(False)
    app.actions['actionCropReturns'].setEnabled(False)
    app.actions['actionShowRPM'].enabled = True

# Action Related Logic
def planeFit():
    planefit.fitPlane(app.actions['actionSpreadsheet'])


def findPresetByName(name):
    presets = servermanager.vtkSMTransferFunctionPresets()

    numberOfPresets = presets.GetNumberOfPresets()

    for i in range(0,numberOfPresets):
        currentName = presets.GetPresetName(i)
        if currentName == name:
            return i

    return -1


def createDSRColorsPreset():

    dsrColorIndex = findPresetByName("DSR Colors")

    if dsrColorIndex == -1:
        rcolor = [0,        0,         0,         0,         0,         0,         0,         0,         0,         0,         0,         0,         0,         0,         0,
                  0,         0,         0,         0,         0,         0,         0,         0,         0,    0.0625,    0.1250,    0.1875,    0.2500,    0.3125,    0.3750,
                  0.4375,    0.5000,    0.5625,    0.6250,    0.6875,    0.7500,    0.8125,    0.8750,    0.9375,    1.0000,    1.0000,    1.0000,    1.0000,    1.0000,    1.0000,
                  1.0000,    1.0000,    1.0000,    1.0000,    1.0000,    1.0000,    1.0000,    1.0000,    1.0000 ,   1.0000,    1.0000,    0.9375,    0.8750,    0.8125,    0.7500,
                  0.6875,    0.6250,    0.5625,    0.5000]

        gcolor = [0,         0,         0,         0,         0,         0 ,        0,         0,    0.0625,    0.1250,    0.1875,    0.2500,    0.3125,    0.3750,    0.4375,
                  0.5000,    0.5625,    0.6250,    0.6875,    0.7500,    0.8125,    0.8750,    0.9375,    1.0000,    1.0000,    1.0000,    1.0000,    1.0000,    1.0000,    1.0000,
                  1.0000,    1.0000,    1.0000,    1.0000,   1.0000,    1.0000,    1.0000,    1.0000,    1.0000,    1.0000,    0.9375,    0.8750,    0.8125,    0.7500,    0.6875,
                  0.6250,    0.5625,    0.5000,    0.4375,    0.3750,    0.3125,    0.2500,    0.1875,    0.1250,    0.0625,         0,         0,         0,         0,         0,
                  0,         0,         0,         0]

        bcolor = [0.5625,    0.6250,    0.6875,    0.7500,    0.8125,    0.8750,    0.9375,    1.0000,    1.0000,    1.0000,    1.0000,    1.0000,    1.0000,    1.0000,    1.0000,
                  1.0000,    1.0000,    1.0000,    1.0000,    1.0000,    1.0000,    1.0000,    1.0000,    1.0000,    0.9375,    0.8750,    0.8125,    0.7500,    0.6875,    0.6250,
                  0.5625,    0.5000,    0.4375,    0.3750,    0.3125,    0.2500,   0.1875,    0.1250,    0.0625,         0,         0,         0,         0,         0,         0,
                  0,         0 ,        0,         0,         0,         0,         0,         0,         0 ,        0 ,        0 ,        0,         0 ,        0 ,        0,
                  0,         0,         0,         0]

        intensityColor = [0] * 256

        for i in range(0,63):
            index = i/63.0*255.0

            intensityColor[i*4] = index
            intensityColor[i*4+1] = rcolor[i]
            intensityColor[i*4+2] = gcolor[i]
            intensityColor[i*4+3] = bcolor[i]
            i = i + 1

        presets = servermanager.vtkSMTransferFunctionPresets()

        intensityString = ',\n'.join(map(str, intensityColor))

        intensityJSON = "{\n\"ColorSpace\" : \"RGB\",\n\"Name\" : \"DSR\",\n\"NanColor\" : [ 1, 1, 0 ],\n\"RGBPoints\" : [\n"+ intensityString + "\n]\n}"

        presets.AddPreset("DSR Colors",intensityJSON)


def setDefaultLookupTables(sourceProxy):
    createDSRColorsPreset()

    #presets = servermanager.vtkSMTransferFunctionPresets()
    #dsrIndex = findPresetByName("DSR Colors")
    #presetDSR = presets.GetPresetAsString(dsrIndex)

    # LUT for 'intensity'
    smp.GetLookupTableForArray(
      'intensity', 1,
      ScalarRangeInitialized=1.0,
      ColorSpace='HSV',
      RGBPoints=[0.0, 0.0, 0.0, 1.0,
               100.0, 1.0, 1.0, 0.0,
               256.0, 1.0, 0.0, 0.0])

    # LUT for 'reflectivity'
    smp.GetLookupTableForArray(
       'reflectivity', 1,
       ScalarRangeInitialized=1.0,
       ColorSpace='HSV',
       RGBPoints=[0.0, 0.0, 0.0, 1.0,
                100.0, 1.0, 1.0, 0.0,
                256.0, 1.0, 0.0, 0.0])

    # LUT for 'dual_distance'
    smp.GetLookupTableForArray(
      'dual_distance', 1,
      InterpretValuesAsCategories=True, NumberOfTableValues=3,
      RGBPoints=[-1.0, 0.1, 0.5, 0.7,
                  0.0, 0.9, 0.9, 0.9,
                 +1.0, 0.8, 0.2, 0.3],
      Annotations=['-1', 'near', '0', 'dual', '1', 'far'])

    # LUT for 'dual_intensity'
    smp.GetLookupTableForArray(
      'dual_intensity', 1,
      InterpretValuesAsCategories=True, NumberOfTableValues=3,
      RGBPoints=[-1.0, 0.5, 0.2, 0.8,
                  0.0, 0.6, 0.6, 0.6,
                 +1.0, 1.0, 0.9, 0.4],
      Annotations=['-1', 'low', '0', 'dual', '1', 'high'])


def getTimeStamp():
    format = '%Y-%m-%d-%H-%M-%S'
    return datetime.datetime.now().strftime(format)


def getReaderFileName():
    filename = getReader().FileName
    return filename[0] if isinstance(filename, servermanager.FileNameProperty) else filename


def getDefaultSaveFileName(extension, suffix='', appendFrameNumber=False):

    sensor = getSensor()
    reader = getReader()

    if sensor:
        nchannels =  sensor.Interpreter.GetClientSideObject().GetNumberOfChannels()
        base = 'HDL-'
        if nchannels <= 16:
            base = 'VLP-'
        sensortype = base + str(nchannels)

        return '%s_Velodyne-%s-Data.%s' % (getTimeStamp(), sensortype, extension)

    if reader:
        basename =  os.path.splitext(os.path.basename(getReaderFileName()))[0]
        if appendFrameNumber:
            suffix = '%s (Frame %04d)' % (suffix, int(app.scene.AnimationTime))
        return '%s%s.%s' % (basename, suffix, extension)

# Used by Ui/lqOpenPcapReaction Ui/lqOpenSensorReaction
def UpdateApplogicLidar(lidarProxyName, gpsProxyName):

    sensor = smp.FindSource(lidarProxyName)

    sensor.UpdatePipeline()

    if gpsProxyName:
        app.position = smp.FindSource(gpsProxyName)

    smp.GetActiveView().ViewTime = 0.0

    app.sensor = sensor

    app.trailingFramesSpinBox.enabled = False
    app.colorByInitialized = False
    LidarPort = sensor.GetClientSideObject().GetListeningPort()
    app.filenameLabel.setText('Live sensor stream (Port:'+str(LidarPort)+')' )
    app.positionPacketInfoLabel.setText('')
    enableSaveActions()

    onCropReturns(False) # Dont show the dialog just restore settings

    smp.Render()

    showSourceInSpreadSheet(sensor)

    app.actions['actionShowRPM'].enabled = True

    #Auto adjustment of the grid size with the distance resolution
    app.DistanceResolutionM = sensor.Interpreter.GetClientSideObject().GetDistanceResolutionM()
    showMeasurementGrid()
    
    setDefaultLookupTables(sensor)
    updateUIwithNewLidar()

# Used by Ui/lqOpenPcapReaction
def UpdateApplogicReader(lidarName, posOrName, trailingFrameName):

    reader = smp.FindSource(lidarName)

    if not reader :
      return

    reader.UpdatePipelineInformation()
    app.reader = reader
    app.trailingFramesSpinBox.enabled = True
    current_trailingFrame = smp.FindSource(trailingFrameName)
    if not current_trailingFrame :
        return
    current_trailingFrame.NumberOfTrailingFrames=app.trailingFramesSpinBox.value

    filename = reader.FileName
    displayableFilename = os.path.basename(filename)
    # shorten the name to display because the status bar gives a lower bound to main window width
    shortDisplayableFilename = (displayableFilename[:20] + '...' + displayableFilename[-20:]) if len(displayableFilename) > 43 else displayableFilename
    app.filenameLabel.setText('File: %s' % shortDisplayableFilename)
    app.filenameLabel.setToolTip('File: %s' % displayableFilename)

    app.positionPacketInfoLabel.setText('') # will be updated later if possible
    onCropReturns(False) # Dont show the dialog just restore settings

    smp.GetActiveView().ViewTime = 0.0

    app.scene.UpdateAnimationUsingDataTimeSteps()

    posreader = smp.FindSource(posOrName)

    if posreader :
        output0 = posreader.GetClientSideObject().GetOutput(0)
        if output0.GetNumberOfPoints() != 0:

            output1 = posreader.GetClientSideObject().GetOutputDataObject(1)
            trange = output1.GetColumnByName("time").GetRange()

            # Setup scalar bar
            rep = smp.GetDisplayProperties(posreader)
            rep.ColorArrayName = 'time'
            rgbPoints = [trange[0], 0.0, 0.0, 1.0,
                         trange[1], 1.0, 0.0, 0.0]
            rep.LookupTable = smp.GetLookupTableForArray('time', 1,
                                                         RGBPoints=rgbPoints,
                                                         ScalarRangeInitialized=1.0)
            sb = smp.CreateScalarBar(LookupTable=rep.LookupTable, Title='Time')
            sb.Orientation = 'Horizontal'
            app.position = posreader


    smp.SetActiveView(app.mainView)

    showSourceInSpreadSheet(current_trailingFrame)

    enableSaveActions()

    app.actions['actionShowRPM'].enabled = True

    #Auto adjustment of the grid size with the distance resolution
    app.DistanceResolutionM = reader.Interpreter.GetClientSideObject().GetDistanceResolutionM()
    showMeasurementGrid()

    setDefaultLookupTables(current_trailingFrame)
    app.trailingFrame.append(current_trailingFrame)
    updateUIwithNewLidar()

def hideMeasurementGrid():
    rep = smp.GetDisplayProperties(app.grid)
    rep.Visibility = 0
    smp.Render()


def showMeasurementGrid():
    rep = smp.GetDisplayProperties(app.grid)
    rep.Visibility = 1
    smp.Render()

def rotateCSVFile(filename):

    # read the csv file, move the last 3 columns to the
    # front, and then overwrite the file with the result
    csvFile = open(filename, 'rt')
    reader = csv.reader(csvFile, quoting=csv.QUOTE_NONNUMERIC)
    rows = [row[-3:] + row[:-3] for row in reader]
    csvFile.close()

    writer = csv.writer(open(filename, 'wt'), quoting=csv.QUOTE_NONNUMERIC, delimiter=',', lineterminator = '\n')
    writer.writerows(rows)


def savePositionCSV(filename):
    w = smp.CreateWriter(filename, getPosition())
    w.Precision = 16
    w.FieldAssociation = 'Points'
    w.UpdatePipeline()
    smp.Delete(w)

def saveCSVCurrentFrame(filename):
    w = smp.CreateWriter(filename, getLidar())
    w.Precision = 16
    w.FieldAssociation = 'Points'
    w.UpdatePipeline()
    smp.Delete(w)
    rotateCSVFile(filename)

def saveCSVCurrentFrameSelection(filename):
    source = getReader()
    selection = source.GetSelectionOutput(0)
    extractSelection = smp.ExtractSelection(Input = source, Selection = selection.Selection)
    w = smp.CreateWriter(filename, extractSelection)
    w.Precision = 16
    w.FieldAssociation = 'Points'
    w.UpdatePipeline()
    smp.Delete(w)
    rotateCSVFile(filename)

# transform parameter indicates the coordinates system and
# the referential for the exported points clouds:
# - 0 Sensor: sensor referential, cartesian coordinate system
# - 1: Relative Geoposition: NED base centered at the first position
#      of the sensor, cartesian coordinate system
# - 2: Absolute Geoposition: NED base centered at the corresponding
#      UTM zone, cartesian coordinate system
# - 3: Absolute Geoposition Lat/Lon: Lat / Lon coordinate system
def saveLASFrames(filename, first, last, transform = 0):
    reader = getReader().GetClientSideObject()

    # Check that we have a position provider
    if getPosition() is not None:
        position = getPosition().GetClientSideObject().GetOutput()

        PythonQt.paraview.lqLidarViewManager.saveFramesToLAS(
            reader, position, first, last, filename, transform)

    else:
        PythonQt.paraview.lqLidarViewManager.saveFramesToLAS(
            reader, None, first, last, filename, transform)


# transform parameter indicates the coordinates system and
# the referential for the exported points clouds:
# - 0 Sensor: sensor referential, cartesian coordinate system
# - 1: Relative Geoposition: NED base centered at the first position
#      of the sensor, cartesian coordinate system
# - 2: Absolute Geoposition: NED base centered at the corresponding
#      UTM zone, cartesian coordinate system
# - 3: Absolute Geoposition Lat/Lon: Lat / Lon coordinate system
def saveLASCurrentFrame(filename, transform = 0):
    t = app.scene.AnimationTime
    saveLASFrames(filename, t, t, transform)


def saveAllFrames(filename, saveFunction):
    saveFunction(filename, getLidar.TimestepValues())


def saveFrameRange(filename, frameStart, frameStop, saveFunction):
    timesteps = range(frameStart, frameStop+1)
    saveFunction(filename, timesteps)


def saveCSV(filename, timesteps):

    tempDir = kiwiviewerExporter.tempfile.mkdtemp()
    basenameWithoutExtension = os.path.splitext(os.path.basename(filename))[0]
    outDir = os.path.join(tempDir, basenameWithoutExtension)
    filenameTemplate = os.path.join(outDir, basenameWithoutExtension + ' (Frame %04d).csv')
    os.makedirs(outDir)

    writer = smp.CreateWriter('tmp.csv', getLidar())
    writer.FieldAssociation = 'Points'
    writer.Precision = 16

    for t in timesteps:
        app.scene.AnimationTime = t
        writer.FileName = filenameTemplate % t
        writer.UpdatePipeline()
        rotateCSVFile(writer.FileName)

    smp.Delete(writer)

    kiwiviewerExporter.zipDir(outDir, filename)
    kiwiviewerExporter.shutil.rmtree(tempDir)

# transform parameter indicates the coordinates system and
# the referential for the exported points clouds:
# - 0 Sensor: sensor referential, cartesian coordinate system
# - 1: Relative Geoposition: NED base centered at the first position
#      of the sensor, cartesian coordinate system
# - 2: Absolute Geoposition: NED base centered at the corresponding
#      UTM zone, cartesian coordinate system
# - 3: Absolute Geoposition Lat/Lon: Lat / Lon coordinate system
def saveLAS(filename, timesteps, transform = 0):

    tempDir = kiwiviewerExporter.tempfile.mkdtemp()
    basenameWithoutExtension = os.path.splitext(os.path.basename(filename))[0]
    outDir = os.path.join(tempDir, basenameWithoutExtension)
    filenameTemplate = os.path.join(outDir, basenameWithoutExtension + ' (Frame %04d).csv')
    os.makedirs(outDir)

    for t in sorted(timesteps):
        saveLASFrames(filenameTemplate % t, t, t, transform)

    kiwiviewerExporter.zipDir(outDir, filename)
    kiwiviewerExporter.shutil.rmtree(tempDir)


def getSaveFileName(title, extension, defaultFileName=None):

    settings = getPVSettings()
    defaultDir = settings.value('LidarPlugin/OpenData/DefaultDir', QtCore.QDir.homePath())
    defaultFileName = defaultDir if not defaultFileName else os.path.join(defaultDir, defaultFileName)

    nativeDialog = 0 if app.actions['actionNative_File_Dialogs'].isChecked() else QtGui.QFileDialog.DontUseNativeDialog

    filters = '%s (*.%s)' % (extension, extension)
    selectedFilter = '%s (*.%s)' % (extension, extension)
    fileName = QtGui.QFileDialog.getSaveFileName(getMainWindow(), title,
                        defaultFileName, filters, selectedFilter, nativeDialog)

    if fileName:
        settings.setValue('LidarPlugin/OpenData/DefaultDir', QtCore.QFileInfo(fileName).absoluteDir().absolutePath())
        return fileName


def restoreNativeFileDialogsAction():
    settings = getPVSettings()
    app.actions['actionNative_File_Dialogs'].setChecked(int(settings.value('LidarPlugin/NativeFileDialogs', 1)))

# Action related Logic
def onNativeFileDialogsAction():
    settings = getPVSettings()
    settings.setValue('LidarPlugin/NativeFileDialogs', int(app.actions['actionNative_File_Dialogs'].isChecked()))


def getFrameSelectionFromUser(frameStrideVisibility=False, framePackVisibility=False, frameTransformVisibility=False):
    class FrameOptions(object):
        pass

    dialog = PythonQt.paraview.vvSelectFramesDialog(getMainWindow())
    dialog.frameMinimum = 0
    if app.reader is None:
        dialog.frameMaximum = 0
    elif app.reader.GetClientSideObject().GetShowFirstAndLastFrame():
        dialog.frameMaximum = app.reader.GetClientSideObject().GetNumberOfFrames() - 1
    else:
        dialog.frameMaximum = app.reader.GetClientSideObject().GetNumberOfFrames() - 3
    dialog.frameStrideVisibility = frameStrideVisibility
    dialog.framePackVisibility = framePackVisibility
    dialog.frameTransformVisibility = frameTransformVisibility
    dialog.restoreState()

    if not dialog.exec_():
        return None

    frameOptions = FrameOptions()
    frameOptions.mode = dialog.frameMode
    frameOptions.start = dialog.frameStart
    frameOptions.stop = dialog.frameStop
    frameOptions.stride = dialog.frameStride
    frameOptions.pack = dialog.framePack
    frameOptions.transform = dialog.frameTransform

    dialog.setParent(None)

    return frameOptions


def onSaveCSV():

    frameOptions = getFrameSelectionFromUser()
    if frameOptions is None:
        return


    if frameOptions.mode == vvSelectFramesDialog.CURRENT_FRAME:
        fileName = getSaveFileName('Save CSV', 'csv', getDefaultSaveFileName('csv', appendFrameNumber=True))
        if fileName:
            oldTransform = transformMode()
            setTransformMode(1 if frameOptions.transform else 0)

            saveCSVCurrentFrame(fileName)

            setTransformMode(oldTransform)

    else:
        # It is not possible to save several frames as CSV during stream
        if getSensor():
            QtGui.QMessageBox.information(getMainWindow(),
                                        'Save several frames as CSV is not available during stream',
                                        'Please use the "Record" tool, and open the resulting pcap offline to process it.')
            return

        fileName = getSaveFileName('Save CSV (to zip file)', 'zip', getDefaultSaveFileName('zip'))
        if fileName:
            oldTransform = transformMode()
            setTransformMode(1 if frameOptions.transform else 0)

            if frameOptions.mode == vvSelectFramesDialog.ALL_FRAMES:
                saveAllFrames(fileName, saveCSV)
            else:
                start = frameOptions.start
                stop = frameOptions.stop
                saveFrameRange(fileName, start, stop, saveCSV)

            setTransformMode(oldTransform)


def onSavePosition():
    fileName = getSaveFileName('Save CSV', 'csv', getDefaultSaveFileName('csv', '-position'))
    if fileName:
        savePositionCSV(fileName)


def onSaveLAS():

    frameOptions = getFrameSelectionFromUser(framePackVisibility=True, frameTransformVisibility=False)
    if frameOptions is None:
        return

    if frameOptions.mode == vvSelectFramesDialog.CURRENT_FRAME:
        frameOptions.start = frameOptions.stop = app.scene.AnimationTime
    elif frameOptions.mode == vvSelectFramesDialog.ALL_FRAMES:
        frameOptions.start = int(app.scene.StartTime)
        frameOptions.stop = int(app.scene.EndTime)

    if frameOptions.mode == vvSelectFramesDialog.CURRENT_FRAME:
        fileName = getSaveFileName('Save LAS', 'las', getDefaultSaveFileName('las', appendFrameNumber=True))
        if fileName:
            oldTransform = transformMode()
            setTransformMode(1 if frameOptions.transform else 0)

            saveLASCurrentFrame(fileName, frameOptions.transform)

            setTransformMode(oldTransform)

    elif frameOptions.pack == vvSelectFramesDialog.FILE_PER_FRAME:
        fileName = getSaveFileName('Save LAS (to zip file)', 'zip',
                                   getDefaultSaveFileName('zip'))
        if fileName:
            oldTransform = transformMode()
            setTransformMode(1 if frameOptions.transform else 0)

            def saveTransformedLAS(filename, timesteps):
                saveLAS(filename, timesteps, frameOptions.transform)

            if frameOptions.mode == vvSelectFramesDialog.ALL_FRAMES:
                saveAllFrames(fileName, saveTransformedLAS)
            else:
                start = frameOptions.start
                stop = frameOptions.stop
                saveFrameRange(fileName, start, stop, saveTransformedLAS)

            setTransformMode(oldTransform)

    else:
        suffix = ' (Frame %d to %d)' % (frameOptions.start, frameOptions.stop)
        defaultFileName = getDefaultSaveFileName('las', suffix=suffix)
        fileName = getSaveFileName('Save LAS', 'las', defaultFileName)
        if not fileName:
            return

        oldTransform = transformMode()
        setTransformMode(1 if frameOptions.transform else 0)

        saveLASFrames(fileName, frameOptions.start, frameOptions.stop,
                      frameOptions.transform)

        setTransformMode(oldTransform)


def onSavePCAP():

    frameOptions = getFrameSelectionFromUser(frameTransformVisibility=False)
    if frameOptions is None:
        return

    if frameOptions.mode == vvSelectFramesDialog.CURRENT_FRAME:
        frameOptions.start = frameOptions.stop = bisect.bisect_left(
          getAnimationScene().TimeKeeper.TimestepValues,
          getAnimationScene().TimeKeeper.Time)
    elif frameOptions.mode == vvSelectFramesDialog.ALL_FRAMES:
        frameOptions.start = 0
        frameOptions.stop = 0 if app.reader is None else app.reader.GetClientSideObject().GetNumberOfFrames() - 1

    defaultFileName = getDefaultSaveFileName('pcap', suffix=' (Frame %d to %d)' % (frameOptions.start, frameOptions.stop))
    fileName = getSaveFileName('Save PCAP', 'pcap', defaultFileName)
    if not fileName:
        return

    PythonQt.paraview.lqLidarViewManager.saveFramesToPCAP(getReader().SMProxy, frameOptions.start, frameOptions.stop, fileName)


def onSaveScreenshot():

    fileName = getSaveFileName('Save Screenshot', 'png', getDefaultSaveFileName('png', appendFrameNumber=True))
    if fileName:
        if fileName[-4:] != ".png":
            fileName += ".png"
        saveScreenshot(fileName)


def onKiwiViewerExport():

    frameOptions = getFrameSelectionFromUser(frameStrideVisibility=True,
                                             frameTransformVisibility=False)
    if frameOptions is None:
        return

    defaultFileName = getDefaultSaveFileName('zip', suffix=' (KiwiViewer)')
    fileName = getSaveFileName('Export To KiwiViewer', 'zip', defaultFileName)
    if not fileName:
        return

    if frameOptions.mode == vvSelectFramesDialog.CURRENT_FRAME:
        timesteps = [app.scene.AnimationTime]
    elif frameOptions.mode == vvSelectFramesDialog.ALL_FRAMES:
        timesteps = range(int(app.scene.StartTime), int(app.scene.EndTime) + 1, frameOptions.stride)
    else:
        timesteps = range(frameOptions.start, frameOptions.stop+1, frameOptions.stride)

    saveToKiwiViewer(fileName, timesteps)


def saveToKiwiViewer(filename, timesteps):

    tempDir = kiwiviewerExporter.tempfile.mkdtemp()
    outDir = os.path.join(tempDir, os.path.splitext(os.path.basename(filename))[0])

    os.makedirs(outDir)

    filenames = exportToDirectory(outDir, timesteps)

    kiwiviewerExporter.writeJsonData(outDir, smp.GetActiveView(), smp.GetDisplayProperties(), filenames)

    kiwiviewerExporter.zipDir(outDir, filename)
    kiwiviewerExporter.shutil.rmtree(tempDir)


def exportToDirectory(outDir, timesteps):

    filenames = []

    alg = smp.GetActiveSource().GetClientSideObject()

    writer = vtkXMLPolyDataWriter()
    writer.SetDataModeToAppended()
    writer.EncodeAppendedDataOff()
    writer.SetCompressorTypeToZLib()

    for t in timesteps:

        filename = 'frame_%04d.vtp' % t
        filenames.append(filename)

        app.scene.AnimationTime = t
        polyData = vtk.vtkPolyData()
        polyData.ShallowCopy(alg.GetOutput())

        writer.SetInputData(polyData)
        writer.SetFileName(os.path.join(outDir, filename))
        writer.Update()

    return filenames


def onClose():
    # Save grid properties for this session
    app.gridProperties.Normal = app.grid.Normal
    app.gridProperties.Origin = app.grid.Origin
    app.gridProperties.Scale = app.grid.Scale
    app.gridProperties.GridNbTicks = app.grid.GridNbTicks
    app.gridProperties.LineWidth = app.grid.LineWidth
    app.gridProperties.Color = app.grid.Color

    smp.GetAnimationScene().Stop()
    unloadData()
    app.scene.AnimationTime = 0
    app.reader = None
    app.sensor = None
    app.trailingFrame = []

    smp.HideUnusedScalarBars()

    resetCameraToForwardView()
    app.filenameLabel.setText('')
    app.statusLabel.setText('')
    disableSaveActions()


# Generic Helpers
def _setSaveActionsEnabled(enabled):
    for action in ('SavePCAP', 'Export_To_KiwiViewer',
                   'Close', 'CropReturns'):
        app.actions['action'+action].setEnabled(enabled)
    getMainWindow().findChild('QMenu', 'menuSaveAs').enabled = enabled


def enableSaveActions():
    _setSaveActionsEnabled(True)
    if getPosition():
        app.actions['actionSavePositionCSV'].setEnabled(True)


def disableSaveActions():
    _setSaveActionsEnabled(False)
    app.actions['actionSavePositionCSV'].setEnabled(False)


def unloadData():

    for k, src in smp.GetSources().items():
        if src != app.grid and src != smp.FindSource("RPM"):
            smp.Delete(src)

    app.reader = None
    app.trailingFrame = []
    app.position = None
    app.sensor = None

    clearSpreadSheetView()

def getReader():
    return getattr(app, 'reader', None)

def getSensor():
    return getattr(app, 'sensor', None)

def getLidar():
    return getReader() or getSensor()

def getLidarPacketInterpreter():
    lidar = getLidar()
    if lidar:
      return lidar.Interpreter
    return None

def getPosition():
    return getattr(app, 'position', None)

def onCropReturns(show = True):
    dialog = vvCropReturnsDialog(getMainWindow())

    cropEnabled = False
    cropOutside = False
    firstCorner = QtGui.QVector3D()
    secondCorner = QtGui.QVector3D()

    lidarInterpreter = getLidarPacketInterpreter()

    # Retrieve current values to fill the UI
    if lidarInterpreter:
        cropEnabled = lidarInterpreter.CropMode != 'None'
        cropOutside = lidarInterpreter.CropOutside
        firstCorner = QtGui.QVector3D(lidarInterpreter.CropRegion[0], lidarInterpreter.CropRegion[2], lidarInterpreter.CropRegion[4])
        secondCorner = QtGui.QVector3D(lidarInterpreter.CropRegion[1], lidarInterpreter.CropRegion[3], lidarInterpreter.CropRegion[5])

    #show the dialog box
    if show:
        dialog.cropOutside = cropOutside
        dialog.firstCorner = firstCorner
        dialog.secondCorner = secondCorner
        dialog.croppingEnabled = cropEnabled
        # Enforce the call to dialog.croppingEnabled."onChanged" even if dialog.croppingEnabled == cropEnabled
        dialog.croppingEnabled = not dialog.croppingEnabled
        dialog.croppingEnabled = not dialog.croppingEnabled

        # update the dialog configuration
        dialog.UpdateDialogWithCurrentSetting()

        if not dialog.exec_():
            return

    if lidarInterpreter:
        lidarInterpreter.CropOutside = dialog.cropOutside
        dialogCropMode = ['None', 'Cartesian', 'Spherical']
        lidarInterpreter.CropMode = dialogCropMode[dialog.GetCropMode()]
        p1 = dialog.firstCorner
        p2 = dialog.secondCorner
        lidarInterpreter.CropRegion = [p1.x(), p2.x(), p1.y(), p2.y(), p1.z(), p2.z()]
        if show:
            smp.Render()


def resetCameraToForwardView(view=None):

    view = view or smp.GetActiveView()
    view.CameraFocalPoint = [0,0,0]
    view.CameraViewUp = [0, 0.27, 0.96]
    view.CameraPosition = [0, -72, 18.0]
    view.CenterOfRotation = [0, 0, 0]
    smp.Render(view)


def saveScreenshot(filename):
    smp.WriteImage(filename)

    # reload the saved screenshot as a pixmap
    screenshot = QtGui.QPixmap()
    screenshot.load(filename)

    # create a new pixmap with the status bar widget painted at the bottom
    statusBar = QtGui.QWidget.grab(getMainWindow().statusBar())
    composite = QtGui.QPixmap(screenshot.width(), screenshot.height() + statusBar.height())
    painter = QtGui.QPainter()
    painter.begin(composite)
    painter.drawPixmap(screenshot.rect(), screenshot, screenshot.rect())
    painter.drawPixmap(statusBar.rect().translated(0, screenshot.height()), statusBar, statusBar.rect())
    painter.end()

    # save final screenshot
    composite.save(filename)


def getSpreadSheetViewProxy():
    return smp.servermanager.ProxyManager().GetProxy("views", "main spreadsheet view")

def clearSpreadSheetView():
    view = getSpreadSheetViewProxy()
    if view is not None:
        view.Representations = []


def showSourceInSpreadSheet(source):

    spreadSheetView = getSpreadSheetViewProxy()
    smp.Show(source, spreadSheetView)

    # Work around a bug where the 'Showing' combobox doesn't update.
    # Calling hide and show again will trigger the refresh.
    smp.Hide(source, spreadSheetView)
    smp.Show(source, spreadSheetView)

def createGrid():
    app.grid = smp.GridSource(guiName='Measurement Grid')
    if app.gridProperties.Persist == False:
        app.grid.GridNbTicks = (int(math.ceil(50000 * app.DistanceResolutionM/ app.grid.Scale )))
    else:
        # Restore grid properties
        grid.Normal = app.gridProperties.Normal
        grid.Origin = app.gridProperties.Origin
        grid.Scale = app.gridProperties.Scale
        grid.GridNbTicks = app.gridProperties.GridNbTicks
        grid.LineWidth = app.gridProperties.LineWidth
        grid.Color = app.gridProperties.Color

    rep = smp.Show(app.grid)
    rep.LineWidth = app.grid.LineWidth
    rep.DiffuseColor = app.grid.Color
    rep.Pickable = 0
    rep.Visibility = 0
    smp.SetActiveSource(None)

    app.grid.UpdatePipeline()
    smp.Show(app.grid)
    return app.grid

def hideGrid():
    smp.GetDisplayProperties(app.grid).Hide()


def showGrid():
    smp.GetDisplayProperties(app.grid).Show()

def getAnimationScene():
    '''This function is a workaround because paraview.simple.GetAnimationScene()
    has an issue where the returned proxy might not have its Cues property initialized'''
    for proxy in servermanager.ProxyManager().GetProxiesInGroup("animation").values():
        if proxy.GetXMLName() == 'AnimationScene' and len(proxy.Cues):
            return proxy


def start():

    global app
    app = AppLogic()
    app.scene = getAnimationScene()

    view = smp.GetActiveView()
    view.Background = [0.0, 0.0, 0.0]
    view.Background2 = [0.0, 0.0, 0.2]
    view.UseGradientBackground = True
    smp._DisableFirstRenderCameraReset()
    smp.GetActiveView().LODThreshold = 1e100

    resetCameraToForwardView()

    setupActions()
    disableSaveActions()
    setupStatusBar()
    hideColorByComponent()
    restoreNativeFileDialogsAction()
    createRPMBehaviour()
    
    # Create Grid #WIP not perfect requires loaded plugin
    app.DistanceResolutionM = 0.002
    app.gridProperties = GridProperties() # Reset Grid Properties
    createGrid()

def findQObjectByName(widgets, name):
    for w in widgets:
        if w.objectName == name:
            return w


def getMainWindow():
    return findQObjectByName(QtGui.QApplication.topLevelWidgets(), 'vvMainWindow')


def getPVApplicationCore():
    return PythonQt.paraview.pqPVApplicationCore.instance()


def getPVSettings():
    return getPVApplicationCore().settings()


def getTimeKeeper():
    return getPVApplicationCore().getActiveServer().getTimeKeeper()


def onTrailingFramesChanged(numFrames):
    for tr in app.trailingFrame :
        tr.NumberOfTrailingFrames = numFrames
        smp.Render()

def setupStatusBar():
    # by using a QScrollArea inside the statusBar it should be possible
    # to reduce the minimum main window's width

    statusBar = getMainWindow().statusBar()
    statusBar.addPermanentWidget(app.logoLabel)
    statusBar.addWidget(app.filenameLabel)
    statusBar.addWidget(app.statusLabel)
    statusBar.addWidget(app.sensorInformationLabel)
    statusBar.addWidget(app.positionPacketInfoLabel)

def onGridProperties():
    if not app.grid:
      createGrid()
    if gridAdjustmentDialog.showDialog(getMainWindow(), app.grid, app.gridProperties):
        rep = smp.Show(app.grid)
        rep.LineWidth    = app.grid.LineWidth
        rep.DiffuseColor = app.grid.Color
        smp.Render()

def hideColorByComponent():
    getMainWindow().findChild('lqColorToolbar').findChild('pqDisplayColorWidget').findChildren('QComboBox')[1].hide()

def adjustScalarBarRangeLabelFormat():
    if not app.actions['actionScalarBarVisibility'].isChecked():
        return

    arrayName = getMainWindow().findChild('lqColorToolbar').findChild('pqDisplayColorWidget').findChild('QComboBox').currentText
    if arrayName != '' and hasArrayName(app.reader, arrayName):
        sb = smp.GetScalarBar(smp.GetLookupTableForArray(arrayName, []))
        sb.RangeLabelFormat = '%g'
        smp.Render()

def toggleRPM():
    rpm = smp.FindSource("RPM")
    if rpm:
        if app.actions['actionShowRPM'].isChecked():
            smp.Show(rpm)
        else:
            smp.Hide(rpm)
        smp.Render()

def transformMode():
    reader = getReader()
    if not reader:
        return None

    if reader.Interpreter.ApplyTransform:
        if app.relativeTransform:
            return 2 # relative
        else:
            return 1 # absolute
    return 0 # raw

def setTransformMode(mode):
    # 0 - raw
    # 1 - absolute
    # 2 - relative
    reader = getReader()

    if reader:
        reader.Interpreter.ApplyTransform = (mode > 0)
    app.transformMode = mode
    app.relativeTransform = (mode == 2)

def geolocationChanged(setting):
    setTransformMode(setting)
    smp.Render(view=app.mainView)

def onToogleAdvancedGUI(updateSettings = True):
  """ Switch the GUI between advanced and classic mode"""
  # hide/show Sources menu
  menuSources = getMainWindow().findChild("QMenu", "menuSources").menuAction()
  menuSources.visible = not menuSources.visible
  # hide/show Filters menu
  menuFilters = getMainWindow().findChild("QMenu", "menuFilters").menuAction()
  menuFilters.visible = not menuFilters.visible
  # hide/show Advance menu
  menuAdvance = getMainWindow().findChild("QMenu", "menuAdvance").menuAction()
  menuAdvance.visible = not menuAdvance.visible
  # hide/show view decorator
  getMainWindow().centralWidget().toggleWidgetDecoration()
  # update the UserSettings
  if updateSettings:
    # booleans must be store as int
    newValue = int(not int(getPVSettings().value("LidarPlugin/AdvanceFeature/Enable", 0)))
    getPVSettings().setValue("LidarPlugin/AdvanceFeature/Enable", newValue)

def switchVisibility(Proxy):
    """ Invert the Proxy visibility int the current view """
    ProxyRep = smp.GetRepresentation(Proxy)
    ProxyRep.Visibility = not ProxyRep.Visibility

def ShowPosition():
    if app.position:
        switchVisibility(app.position)
        smp.Render()


def setupActions():

    mW = getMainWindow()
    actions = mW.findChildren('QAction')

    app.actions = {}

    for a in actions:
        app.actions[a.objectName] = a

    app.actions['actionAdvanceFeature'].connect('triggered()', onToogleAdvancedGUI)

    app.actions['actionPlaneFit'].connect('triggered()', planeFit)

    app.actions['actionClose'].connect('triggered()', onClose)
    app.actions['actionSavePositionCSV'].connect('triggered()', onSavePosition)
    app.actions['actionSavePCAP'].connect('triggered()', onSavePCAP)
    app.actions['actionSaveScreenshot'].connect('triggered()', onSaveScreenshot)
    app.actions['actionExport_To_KiwiViewer'].connect('triggered()', onKiwiViewerExport)
    app.actions['actionGrid_Properties'].connect('triggered()', onGridProperties)
    app.actions['actionCropReturns'].connect('triggered()', onCropReturns)
    app.actions['actionNative_File_Dialogs'].connect('triggered()', onNativeFileDialogsAction)
    app.actions['actionAbout_LidarView'].connect('triggered()', lambda : aboutDialog.showDialog(getMainWindow()) )
    
    app.actions['actionShowPosition'].connect('triggered()', ShowPosition)

    app.actions['actionShowRPM'].connect('triggered()', toggleRPM)

    # Restore action states from settings
    settings = getPVSettings()

    advanceMode = int(settings.value("LidarPlugin/AdvanceFeature/Enable", 0))
    if not advanceMode:
      app.actions['actionAdvanceFeature'].checked = False
      onToogleAdvancedGUI(updateSettings=False)

    # Setup and add the geolocation toolbar
    geolocationToolBar = mW.findChild('QToolBar', 'geolocationToolbar')

    # Creating and adding the geolocation label to the geolocation toolbar
    geolocationLabel = QtGui.QLabel('Frame Mapping: ')
    geolocationToolBar.addWidget(geolocationLabel)

    # Creating the geolocation combobox
    geolocationComboBox = QtGui.QComboBox()

    #Adding the different entries
    geolocationComboBox.addItem('None (RAW Data)')
    geolocationComboBox.setItemData(0, "No mapping: Each frame is at the origin", 3)

    geolocationComboBox.addItem('Absolute Geolocation')
    geolocationComboBox.setItemData(1, "Use GPS geolocation to get each frame absolute location, the first frame is shown at origin", 3)

    geolocationComboBox.addItem('Relative Geolocation')
    geolocationComboBox.setItemData(2, "Use GPS geolocation to get each frame absolute location, the current frame is shown at origin", 3)

    geolocationComboBox.connect('currentIndexChanged(int)', geolocationChanged)
    geolocationToolBar.addWidget(geolocationComboBox)

    # Set default toolbar visibility
    geolocationToolBar.visible = False

    # Trailing Frame Spinbox
    spinBox = QtGui.QSpinBox()
    spinBox.toolTip = "Number of trailing frames"
    spinBox.setMinimum(0)
    spinBox.setMaximum(100)
    spinBox.connect('valueChanged(int)', onTrailingFramesChanged)
    app.trailingFramesSpinBox = spinBox

    displayWidget = getMainWindow().findChild('lqColorToolbar').findChild('pqDisplayColorWidget')
    displayWidget.connect('arraySelectionChanged ()',adjustScalarBarRangeLabelFormat)
    app.actions['actionScalarBarVisibility'].connect('triggered()',adjustScalarBarRangeLabelFormat)


def createRPMBehaviour():
    # create and customize a label to display the rpm
    rpm = smp.Text(guiName="RPM", Text="No RPM")
    representation = smp.GetRepresentation(rpm)
    representation.FontSize = 16
    representation.Color = [1,1,0]
    # create an python animation cue to update the rpm value in the label
    PythonAnimationCue1 = smp.PythonAnimationCue()
    PythonAnimationCue1.Script= """
import paraview.simple as smp
import lidarview.applogic as lv
def start_cue(self):
    pass

def tick(self):
    rpm = smp.FindSource("RPM")
    lidar = lv.getLidar() #smp.FindSource("Data")
    if (lidar):
        value = int(lidar.Interpreter.GetClientSideObject().GetFrequency())
        rpm.Text = str(value) + " RPM"
    else:
        rpm.Text = "No RPM"

def end_cue(self):
    pass
"""
    smp.GetAnimationScene().Cues.append(PythonAnimationCue1)
    # force to be consistant with the UI
    toggleRPM()
    smp.SetActiveSource(None)


def updateUIwithNewLidar():
    lidar = getLidar()
    if lidar:
        app.sensorInformationLabel.setText(lidar.GetClientSideObject().GetSensorInformation())
    #Remove some array to display
    ComboBox = getMainWindow().findChild('lqColorToolbar').findChild('pqDisplayColorWidget').findChildren('QComboBox')[0]
    listOfArrayToRemove = ['RotationPerMinute', 'vtkBlockColors', 'vtkCompositeIndex']
    for arrayName in listOfArrayToRemove:
        n = ComboBox.findText(arrayName)
        ComboBox.removeItem(n)
