/*=========================================================================

  Program:   Visualization Toolkit
  Module:    vtkMultiThreshold.h

  Copyright (c) Ken Martin, Will Schroeder, Bill Lorensen
  All rights reserved.
  See Copyright.txt or http://www.kitware.com/Copyright.htm for details.

     This software is distributed WITHOUT ANY WARRANTY; without even
     the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
     PURPOSE.  See the above copyright notice for more information.

=========================================================================*/
/*----------------------------------------------------------------------------
 Copyright (c) Sandia Corporation
 See Copyright.txt or http://www.paraview.org/HTML/Copyright.html for details.
----------------------------------------------------------------------------*/

/**
 * @class   vtkMultiThreshold
 * @brief   Threshold cells within multiple intervals
 *
 * This filter can be substituted for a chain of several vtkThreshold filters
 * and can also perform more sophisticated subsetting operations.
 * It generates a vtkMultiBlockDataSet as its output.
 * This multiblock dataset contains a vtkUnstructuredGrid for each thresholded
 * subset you request.
 * A thresholded subset can be a set defined by an interval over a
 * point or cell attribute of the mesh; these subsets are called IntervalSets.
 * A thresholded subset can also be a boolean combination of one or more IntervalSets;
 * these subsets are called BooleanSets.
 * BooleanSets allow complex logic since their output
 * can depend on multiple intervals over multiple variables
 * defined on the input mesh.
 * This is useful because it eliminates the need for thresholding several
 * times and then appending the results, as can be required with vtkThreshold
 * when one wants to remove some range of values (e.g., a notch filter).
 * Cells are not repeated when they belong to more than one interval unless
 * those intervals have different output grids.
 *
 * Another advantage this filter provides over vtkThreshold is the ability
 * to threshold on non-scalar (i.e., vector, tensor, etc.) attributes without
 * first computing an array containing some norm of the desired attribute.
 * vtkMultiThreshold provides \f$L_1\f$, \f$L_2\f$, and \f$L_{\infty}\f$ norms.
 *
 * This filter makes a distinction between intermediate subsets and
 * subsets that will be output to a grid.
 * Each intermediate subset you create with AddIntervalSet or
 * AddBooleanSet is given a unique integer identifier (via the return
 * values of these member functions).
 * If you wish for a given set to be output, you must call
 * OutputSet and pass it one of these identifiers.
 * The return of OutputSet is the integer index of the output set
 * in the multiblock dataset created by this filter.
 *
 * For example, if an input mesh defined three attributes T, P, and s, one might
 * wish to find cells that satisfy "T < 320 [K] && ( P > 101 [kPa] || s < 0.1 [kJ/kg/K] )".
 * To accomplish this with a vtkMultiThreshold filter,
 * <pre>
 * vtkMultiThreshold* thr;
 * int intervalSets[3];
 *
 * intervalSets[0] = thr->AddIntervalSet( vtkMath::NegInf(), 320., vtkMultiThreshold::CLOSED,
 * vtkMultiThreshold::OPEN, vtkDataObject::FIELD_ASSOCIATION_POINTS, "T", 0, 1 ); intervalSets[1] =
 * thr->AddIntervalSet( 101., vtkMath::Inf(), vtkMultiThreshold::OPEN, vtkMultiThreshold::CLOSED,
 *     vtkDataObject::FIELD_ASSOCIATION_CELLS, "P", 0, 1 );
 * intervalSets[2] = thr->AddIntervalSet( vtkMath::NegInf(), 0.1, vtkMultiThreshold::CLOSED,
 * vtkMultiThreshold::OPEN, vtkDataObject::FIELD_ASSOCIATION_POINTS, "s", 0, 1 );
 *
 * int intermediate = thr->AddBooleanSet( vtkMultiThreshold::OR, 2, &intervalSets[1] );
 *
 * int intersection[2];
 * intersection[0] = intervalSets[0];
 * intersection[1] = intermediate;
 * int outputSet = thr->AddBooleanSet( vtkMultiThreshold::AND, 2, intersection );
 *
 * int outputGridIndex = thr->OutputSet( outputSet );
 * thr->Update();
 * </pre>
 * The result of this filter will be a multiblock dataset that contains a single child with the
 * desired cells. If we had also called <code>thr->OutputSet( intervalSets[0] );</code>, there would
 * be two child meshes and one would contain all cells with T < 320 [K]. In that case, the output
 * can be represented by this graph
 *
 * \dot
 * digraph MultiThreshold {
 *   set0 [shape=rect,style=filled,label="point T(0) in [-Inf,320["]
 *   set1 [shape=rect,label="cell P(0) in ]101,Inf]"]
 *   set2 [shape=rect,label="point s(0) in [-Inf,0.1["]
 *   set3 [shape=rect,label="OR"]
 *   set4 [shape=rect,style=filled,label="AND"]
 *   set0 -> set4
 *   set1 -> set3
 *   set2 -> set3
 *   set3 -> set4
 * }
 * \enddot
 *
 * The filled rectangles represent sets that are output.
 */

#ifndef vtkMultiThreshold_h
#define vtkMultiThreshold_h

#include "vtkFiltersGeneralModule.h" // For export macro
#include "vtkMath.h"                 // for Inf() and NegInf()
#include "vtkMultiBlockDataSetAlgorithm.h"

#include <map>    // for IntervalRules map
#include <set>    // for UpdateDependents()
#include <string> // for holding array names in NormKey
#include <vector> // for lists of threshold rules

VTK_ABI_NAMESPACE_BEGIN
class vtkCell;
class vtkCellData;
class vtkDataArray;
class vtkGenericCell;
class vtkPointSet;
class vtkUnstructuredGrid;

class VTKFILTERSGENERAL_EXPORT vtkMultiThreshold : public vtkMultiBlockDataSetAlgorithm
{
public:
  vtkTypeMacro(vtkMultiThreshold, vtkMultiBlockDataSetAlgorithm);
  static vtkMultiThreshold* New();
  void PrintSelf(ostream& os, vtkIndent indent) override;

  /// Whether the endpoint value of an interval should be included or excluded.
  enum Closure
  {
    OPEN = 0,  //!< Specify an open interval
    CLOSED = 1 //!< Specify a closed interval
  };
  /// Norms that can be used to threshold vector attributes.
  enum Norm
  {
    LINFINITY_NORM = -3, //!< Use the \f$L_{\infty}\f$ norm for the specified array threshold.
    L2_NORM = -2,        //!< Use the \f$L_2\f$ norm for the specified array threshold.
    L1_NORM = -1         //!< Use the \f$L_1\f$ norm for the specified array threshold.
  };
  /// Operations that can be performed on sets to generate another set. Most of these operators take
  /// 2 or more input sets.
  enum SetOperation
  {
    AND, //!< Only include an element if it belongs to all the input sets
    OR,  //!< Include an element if it belongs to any input set
    XOR, //!< Include an element if it belongs to exactly one input set
    WOR, //!< Include elements that belong to an odd number of input sets (a kind of "winding XOR")
    NAND //!< Only include elements that don't belong to any input set
  };

  ///@{
  /**
   * Add a mesh subset to be computed by thresholding an attribute of the input mesh.
   * The subset can then be added to an output mesh with OutputSet() or
   * combined with other sets using AddBooleanSet.
   * If you wish to include all cells with values below some number \a a, call
   * with xmin set to vtkMath::NegInf() and xmax set to \a a.
   * Similarly, if you wish to include all cells with values above some number \a a,
   * call with xmin set to \a a and xmax set to vtkMath::Inf().
   * When specifying Inf() or NegInf() for an endpoint, it does not matter whether
   * you specify and open or closed endpoint.

   * When creating intervals, any integers can be used for the IDs of output meshes.
   * All that matters is that the same ID be used if intervals should output to the same mesh.
   * The outputs are ordered with ascending IDs in output block 0.

   * It is possible to specify an invalid interval, in which case these routines will return -1.
   * Invalid intervals occur when
   * - an array does not exist,
   * - \a center is invalid,
   * - \a xmin == \a xmax and \a omin and/or \a omax are vtkMultiThreshold::OPEN, or
   * - \a xmin > \a xmax.
   * - \a xmin or \a xmax is not a number (i.e., IEEE NaN). Having both \a xmin and \a xmax equal
   NaN is allowed.
   * vtkMath provides a portable way to specify IEEE infinities and Nan.
   * Note that specifying an interval completely out of the bounds of an attribute is considered
   valid.
   * In fact, it is occasionally useful to create a closed interval with both endpoints set to
   \f$\infty\f$
   * or both endpoints set to \f$-\infty\f$ in order to locate cells with problematic values.

   * @param xmin The minimum attribute value
   * @param xmax The maximum attribute value
   * @param omin Whether the interval should be open or closed at \a xmin. Use
   vtkMultiThreshold::OPEN or vtkMultiThreshold::CLOSED.
   * @param omax Whether the interval should be open or closed at \a xmax. Use
   vtkMultiThreshold::OPEN or vtkMultiThreshold::CLOSED.
   * @param assoc One of vtkDataObject::FIELD_ASSOCIATION_CELLS or
   vtkDataObject::FIELD_ASSOCIATION_POINTS indicating whether
   * a point or cell array should be used.
   * @param arrayName The name of the array to use for thresholding
   * @param attribType The attribute to use for thresholding.
   * One of vtkDataSetAttributes::SCALARS, VECTORS, TENSORS, NORMALS, TCOORDS, or GLOBALIDS.
   * @param component The number of the component to threshold on or one of the following enumerants
   for norms:
   * LINFINITY_NORM, L2_NORM, L1_NORM.
   * @param allScalars When \a center is vtkDataObject::FIELD_ASSOCIATION_POINTS, must all scalars
   be in the interval for
   * the cell to be passed to the output, or just a single point's scalar?
   * @return An index used to identify the cells selected by the interval or -1 if the interval
   specification was invalid.
   * If a valid value is returned, you may pass it to OutputSet().
   */
  int AddIntervalSet(double xmin, double xmax, int omin, int omax, int assoc, const char* arrayName,
    int component, int allScalars);
  int AddIntervalSet(double xmin, double xmax, int omin, int omax, int assoc, int attribType,
    int component, int allScalars);
  ///@}

  ///@{
  /**
   * These convenience members make it easy to insert closed intervals.
   * The "notch" interval is accomplished by creating a bandpass interval and applying a NAND
   * operation. In this case, the set ID returned in the NAND operation set ID. Note that you can
   * pass xmin == xmax when creating a bandpass threshold to retrieve elements matching exactly one
   * value (since the intervals created by these routines are closed).
   */
  int AddLowpassIntervalSet(
    double xmax, int assoc, const char* arrayName, int component, int allScalars);
  int AddHighpassIntervalSet(
    double xmin, int assoc, const char* arrayName, int component, int allScalars);
  int AddBandpassIntervalSet(
    double xmin, double xmax, int assoc, const char* arrayName, int component, int allScalars);
  int AddNotchIntervalSet(
    double xlo, double xhi, int assoc, const char* arrayName, int component, int allScalars);
  ///@}

  /**
   * Create a new mesh subset using boolean operations on pre-existing sets.
   */
  int AddBooleanSet(int operation, int numInputs, int* inputs);

  /**
   * Create an output mesh containing a boolean or interval subset of the input mesh.
   */
  int OutputSet(int setId);

  /**
   * Remove all the intervals currently defined.
   */
  void Reset();

  /// A pointer to a function that returns a norm (or a single component) of a tuple with 1 or more
  /// components.
  typedef double (*TupleNorm)(vtkDataArray* arr, vtkIdType tuple, int component);

  // NormKey must be able to use TupleNorm typedef:
  class NormKey;

  // Interval must be able to use NormKey typedef:
  class Interval;

  // Set needs to refer to boolean set pointers
  class BooleanSet;

  /// A class with comparison operator used to index input array norms used in threshold rules.
  class NormKey
  {
  public:
    int Association; // vtkDataObject::FIELD_ASSOCIATION_POINTS or
                     // vtkDataObject::FIELD_ASSOCIATION_CELLS
    int Type;        // -1 => use Name, otherwise: vtkDataSetAttributes::{SCALARS, VECTORS, TENSORS,
                     // NORMALS, TCOORDS, GLOBALIDS}
    std::string Name; // Either empty or (when ArrayType == -1) an input array name
    int Component;    // LINFINITY_NORM, L1_NORM, L2_NORM or an integer component number
    int AllScalars;   // For Association == vtkDataObject::FIELD_ASSOCIATION_POINTS, must all points
                      // be in the interval?
    int InputArrayIndex;    // The number passed to vtkAlgorithm::SetInputArrayToProcess()
    TupleNorm NormFunction; // A function pointer to compute the norm (or fetcht the correct
                            // component) of a tuple.

    /// Compute the norm of a cell by calling NormFunction for all its points or for its single
    /// cell-centered value.
    void ComputeNorm(
      vtkIdType cellId, vtkCell* cell, vtkDataArray* array, double cellNorm[2]) const;

    /// A partial ordering of NormKey objects is required for them to serve as keys in the
    /// vtkMultiThreshold::IntervalRules map.
    bool operator<(const NormKey& other) const
    {
      if (this->Association < other.Association)
        return true;
      else if (this->Association > other.Association)
        return false;

      if (this->Component < other.Component)
        return true;
      else if (this->Component > other.Component)
        return false;

      if ((!this->AllScalars) && other.AllScalars)
        return true;
      else if (this->AllScalars && (!other.AllScalars))
        return false;

      if (this->Type == -1)
      {
        if (other.Type == -1)
          return this->Name < other.Name;
        return true;
      }
      else
      {
        return this->Type < other.Type;
      }
    }
  };

  /** A base class for representing threshold sets.
   * A set may be represented as a threshold interval over some attribute
   * or as a boolean combination of sets.
   */
  class Set
  {
  public:
    int Id;       /// A unique identifier for this set.
    int OutputId; /// The index of the output mesh that will hold this set or -1 if the set is not
                  /// output.

    /// Default constructor. The grid output ID is initialized to indicate that the set should not
    /// be output.
    Set() { this->OutputId = -1; }
    /// Virtual destructor since we have virtual members.
    virtual ~Set() = default;
    /// Print a graphviz node label statement (with fancy node name and shape).
    virtual void PrintNodeName(ostream& os);
    /// Print a graphviz node name for use in an edge statement.
    virtual void PrintNode(ostream& os) = 0;
    /// Avoid dynamic_casts. Subclasses must override
    virtual BooleanSet* GetBooleanSetPointer();
    virtual Interval* GetIntervalPointer();
  };

  /// A subset of a mesh represented by a range of acceptable attribute values.
  class Interval : public Set
  {
  public:
    /// The values defining the interval. These must be in ascending order.
    double EndpointValues[2];
    /// Are the endpoint values themselves included in the set (CLOSED) or not (OPEN)?
    int EndpointClosures[2];
    /// This contains information about the attribute over which the interval is defined.
    NormKey Norm;

    /** Does the specified range fall inside the interval?
     * For cell-centered attributes, only cellNorm[0] is examined.
     * For point-centered attributes, cellNorm[0] is the minimum norm taken on over the cell and
     * cellNorm[1] is the maximum.
     */
    int Match(double cellNorm[2]);

    ~Interval() override = default;
    void PrintNode(ostream& os) override;
    Interval* GetIntervalPointer() override;
  };

  /// A subset of a mesh represented as a boolean set operation
  class BooleanSet : public Set
  {
  public:
    /// The boolean operation that will be performed on the inputs to obtain the output.
    int Operator;
    /// A list of input sets. These may be IntervalSets or BooleanSets.
    std::vector<int> Inputs;

    /// Construct a new set with the given ID, operator, and inputs.
    BooleanSet(int sId, int op, int* inBegin, int* inEnd)
      : Inputs(inBegin, inEnd)
    {
      this->Id = sId;
      this->Operator = op;
    }
    ~BooleanSet() override = default;
    void PrintNode(ostream& os) override;
    BooleanSet* GetBooleanSetPointer() override;
  };

protected:
  vtkMultiThreshold();
  ~vtkMultiThreshold() override;

  /**
   * When an interval is evaluated, its value is used to update a truth table.
   * If its value allows the output of the truth table to be determined, then
   * either INCLUDE or EXCLUDE is returned. Otherwise, INCONCLUSIVE is returned
   * and more intervals must be evaluated.

   * As an example, consider the ruleset {A>10} & ( {6<B<8} | {C==12} ).
   * We first evaluate A. Say A is 100. This makes the first rule true, but the
   * value of the rule *set* is still indeterminate. INCONCLUSIVE is returned.
   * Next we consider B. If B is 7, then INCLUDE will be returned and there is
   * no need to examine C.  If B is 0, then INCONCLUSIVE is returned again and
   * we must examine C. If C is 12, then INCLUDE is returned, otherwise EXCLUDE
   * is returned.
   */
  enum Ruling
  {
    INCONCLUSIVE = -1,
    INCLUDE = -2,
    EXCLUDE = -3
  };

  /**
   * This function performs the actual thresholding.
   */
  int RequestData(vtkInformation*, vtkInformationVector**, vtkInformationVector*) override;

  /**
   * We accept any mesh that is descended from vtkPointSet.
   * In the future, it is possible to accept more types but this would require
   * us to generate a new vtkPoints object for each output mesh.
   */
  int FillInputPortInformation(int port, vtkInformation* info) override;

  /**
   * A variable used to store the next index to use when calling SetInputArrayToProcess.
   * Its value is stored in an interval's ArrayIndex member and used during RequestData
   * to retrieve a pointer to the actual array.
   */
  int NextArrayIndex;

  /**
   * The number of output datasets.
   */
  int NumberOfOutputs;

  /// A list of pointers to IntervalSets.
  typedef std::vector<Interval*> IntervalList;
  /// A map describing the IntervalSets that share a common attribute and norm.
  typedef std::map<NormKey, IntervalList> RuleMap;

  typedef std::vector<int> TruthTreeValues;
  typedef std::vector<TruthTreeValues> TruthTree;

  /**
   * A set of threshold rules sorted by the attribute+norm to which they are applied.
   */
  RuleMap IntervalRules;

  /**
   * A list of rules keyed by their unique integer ID.
   * This list is used to quickly determine whether interval membership implies membership in a
   * given output mesh.
   */
  std::vector<Set*> Sets;

  /**
   * A list of boolean sets whose values depend on the given set.
   * Each time an interval is evaluated for a cell, the list of dependent boolean sets
   * contained here is updated. Any boolean operations whose truth values are decided
   * are then marked and <i>their</i> dependent sets are examined.
   */
  TruthTree DependentSets;

  /**
   * Recursively update the setStates and unresolvedOutputs vectors based on this->DependentSets.
   */
  void UpdateDependents(int id, std::set<int>& unresolvedOutputs, TruthTreeValues& setStates,
    vtkCellData* inCellData, vtkIdType inCell, vtkGenericCell* cell,
    std::vector<vtkUnstructuredGrid*>& outv);

  /**
   * A utility method called by the public AddInterval members.
   */
  int AddIntervalSet(NormKey& nk, double xmin, double xmax, int omin, int omax);

  /**
   * Print out a graphviz-formatted text description of all the sets.
   */
  void PrintGraph(ostream& os);

  vtkMultiThreshold(const vtkMultiThreshold&) = delete;
  void operator=(const vtkMultiThreshold&) = delete;
};

inline int vtkMultiThreshold::AddLowpassIntervalSet(
  double xmax, int assoc, const char* arrayName, int component, int allScalars)
{
  return this->AddIntervalSet(
    vtkMath::NegInf(), xmax, CLOSED, CLOSED, assoc, arrayName, component, allScalars);
}

inline int vtkMultiThreshold::AddHighpassIntervalSet(
  double xmin, int assoc, const char* arrayName, int component, int allScalars)
{
  return this->AddIntervalSet(
    xmin, vtkMath::Inf(), CLOSED, CLOSED, assoc, arrayName, component, allScalars);
}

inline int vtkMultiThreshold::AddBandpassIntervalSet(
  double xmin, double xmax, int assoc, const char* arrayName, int component, int allScalars)
{
  return this->AddIntervalSet(xmin, xmax, CLOSED, CLOSED, assoc, arrayName, component, allScalars);
}

inline int vtkMultiThreshold::AddNotchIntervalSet(
  double xlo, double xhi, int assoc, const char* arrayName, int component, int allScalars)
{
  int band =
    this->AddIntervalSet(xlo, xhi, CLOSED, CLOSED, assoc, arrayName, component, allScalars);
  if (band < 0)
  {
    return -1;
  }
  return this->AddBooleanSet(NAND, 1, &band);
}

inline vtkMultiThreshold::Interval* vtkMultiThreshold::Set::GetIntervalPointer()
{
  return nullptr;
}

inline vtkMultiThreshold::BooleanSet* vtkMultiThreshold::Set::GetBooleanSetPointer()
{
  return nullptr;
}

inline vtkMultiThreshold::Interval* vtkMultiThreshold::Interval::GetIntervalPointer()
{
  return this;
}

inline vtkMultiThreshold::BooleanSet* vtkMultiThreshold::BooleanSet::GetBooleanSetPointer()
{
  return this;
}

VTK_ABI_NAMESPACE_END
#endif // vtkMultiThreshold_h
