CMakeLists.txt 28.2 KB
Newer Older
1 2 3 4 5
PROJECT(Slicer3)

CMAKE_MINIMUM_REQUIRED(VERSION 2.6)
IF(COMMAND CMAKE_POLICY)
  CMAKE_POLICY(SET CMP0003 NEW)
6
  CMAKE_POLICY(SET CMP0012 NEW)
7 8
ENDIF(COMMAND CMAKE_POLICY)
MARK_AS_ADVANCED(CMAKE_BACKWARDS_COMPATIBILITY)
9

10

11
#-----------------------------------------------------------------------------
12
#
13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
set(Slicer3_INSTALL_BIN_DIR "bin")
set(Slicer3_INSTALL_LIB_DIR "lib/Slicer3")
set(Slicer3_INSTALL_INCLUDE_DIR "include/Slicer3")
set(Slicer3_INSTALL_SHARE_DIR "share/Slicer3")
set(Slicer3_INSTALL_ITKFACTORIES_DIR "${Slicer3_INSTALL_LIB_DIR}/ITKFactories")

set(Slicer3_INSTALL_PLUGINS_BIN_DIR "${Slicer3_INSTALL_LIB_DIR}/Plugins")
set(Slicer3_INSTALL_PLUGINS_LIB_DIR "${Slicer3_INSTALL_LIB_DIR}/Plugins")
set(Slicer3_INSTALL_PLUGINS_INCLUDE_DIR "${Slicer3_INSTALL_INCLUDE_DIR}/Plugins")
set(Slicer3_INSTALL_PLUGINS_SHARE_DIR "${Slicer3_INSTALL_SHARE_DIR}/Plugins")
set(Slicer3_INSTALL_PLUGINS_CACHE_DIR "${Slicer3_INSTALL_LIB_DIR}/PluginsCache")

set(Slicer3_INSTALL_MODULES_BIN_DIR "${Slicer3_INSTALL_LIB_DIR}/Modules")
set(Slicer3_INSTALL_MODULES_LIB_DIR "${Slicer3_INSTALL_LIB_DIR}/Modules")
set(Slicer3_INSTALL_MODULES_INCLUDE_DIR "${Slicer3_INSTALL_INCLUDE_DIR}/Modules")
set(Slicer3_INSTALL_MODULES_SHARE_DIR "${Slicer3_INSTALL_SHARE_DIR}/Modules")

set(Slicer3_HOME "${Slicer3_BINARY_DIR}")

32 33 34 35
#-----------------------------------------------------------------------------
# Convenient macro allowing to download a file
#
MACRO(downloadFile url dest)
36 37 38 39 40 41 42
  IF(NOT EXISTS ${dest})
    FILE(DOWNLOAD ${url} ${dest} STATUS status)
    LIST(GET status 0 error_code)
    LIST(GET status 1 error_msg)
    IF(error_code)
      MESSAGE(FATAL_ERROR "error: Failed to download ${url} - ${error_msg}")
    ENDIF()
43 44
  ELSE()
    # Make sure the file is not empty
45 46 47
    FILE(READ ${dest} dest_content LIMIT 4)
    STRING(LENGTH "${dest_content}" dest_length)
    IF(NOT "${dest_length}" EQUAL 4)
48 49 50
      FILE(REMOVE ${dest})
      downloadFile(${url} ${dest})
    ENDIF()
51 52 53
  ENDIF()
ENDMACRO()

54
#-----------------------------------------------------------------------------
55 56
# Disable the warnings that DevStudio 2005 emits wrt to sprintf, strcpu, etc.
#
57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
# On Visual Studio 8 MS deprecated C. This removes all 1.276E1265 security
# warnings (copied from ITK's CMake files so that ITK templated code will compile
# correctly).
IF(WIN32)
  IF(NOT BORLAND)
    IF(NOT CYGWIN)
      IF(NOT MINGW)
        ADD_DEFINITIONS(
          -D_CRT_FAR_MAPPINGS_NO_DEPRECATE
          -D_CRT_IS_WCTYPE_NO_DEPRECATE
          -D_CRT_MANAGED_FP_NO_DEPRECATE
          -D_CRT_NONSTDC_NO_DEPRECATE
          -D_CRT_SECURE_NO_DEPRECATE
          -D_CRT_SECURE_NO_DEPRECATE_GLOBALS
          -D_CRT_SETERRORMODE_BEEP_SLEEP_NO_DEPRECATE
          -D_CRT_TIME_FUNCTIONS_NO_DEPRECATE
          -D_CRT_VCCLRIT_NO_DEPRECATE
          -D_SCL_SECURE_NO_DEPRECATE
          )
      ENDIF(NOT MINGW)
    ENDIF(NOT CYGWIN)
  ENDIF(NOT BORLAND)
ENDIF(WIN32)

81 82 83 84 85
# Disable warning C4996: [...] This function or variable may be unsafe. [...]
# To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details
if(MSVC90)
  add_definitions(-D_CRT_SECURE_NO_WARNINGS)
endif(MSVC90)
86

87
# include a test for endianness (used to be done by default)
barre's avatar
barre committed
88

89 90 91 92
include(${CMAKE_ROOT}/Modules/TestBigEndian.cmake)
test_big_endian(CMAKE_WORDS_BIGENDIAN)

#-----------------------------------------------------------------------------
93 94 95 96
# avoid linker bug in Mac OS 10.5
# see:
# http://wiki.finkproject.org/index.php/Fink:Packaging:Preparing_for_10.5#OpenGL_Bug
#
97 98 99 100
if(APPLE)
  set(CMAKE_SHARED_LINKER_FLAGS "-Wl,-dylib_file,/System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib:/System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib")
  set(CMAKE_EXE_LINKER_FLAGS "-Wl,-dylib_file,/System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib:/System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib")
endif(APPLE)
101

102 103
#-----------------------------------------------------------------------------
# Slicer version number.
104
#
105
set(Slicer3_VERSION_MAJOR "3")
106
set(Slicer3_VERSION_MINOR "7")
107 108 109 110 111
if(NOT Slicer3_VERSION_PATCH)
  set(Slicer3_VERSION_PATCH "0")
endif(NOT Slicer3_VERSION_PATCH)
set(Slicer3_VERSION "${Slicer3_VERSION_MAJOR}.${Slicer3_VERSION_MINOR}")
set(Slicer3_VERSION_FULL "${Slicer3_VERSION}.${Slicer3_VERSION_PATCH}")
112

113 114
#-----------------------------------------------------------------------------
# Build shared lib by default
115
#
116 117
option(BUILD_SHARED_LIBS "Build Slicer3 with shared libraries." ON)

118 119 120 121 122 123 124 125 126 127 128
#-----------------------------------------------------------------------------
# Append the library version information to the library target properties.
#
OPTION(Slicer3_WITH_LIBRARY_VERSION "Build with library version information" OFF)
IF(Slicer3_WITH_LIBRARY_VERSION)
  SET(Slicer3_LIBRARY_PROPERTIES ${Slicer3_LIBRARY_PROPERTIES}
    VERSION ${Slicer3_VERSION_FULL}
    SOVERSION ${Slicer3_VERSION}
  )
ENDIF(Slicer3_WITH_LIBRARY_VERSION)

129 130
#-----------------------------------------------------------------------------
# Slicer3 macros
pieper's avatar
pieper committed
131
#
132 133 134 135
set(Slicer3_CMAKE_DIR "${Slicer3_SOURCE_DIR}/CMake" CACHE INTERNAL "")
add_subdirectory(CMake)
# Make sure VTK_CMAKE_DIR is at the beginning so that VTK's FindTCL is
# used before CMake's FindTCL.
136 137 138 139 140 141
set(CMAKE_MODULE_PATH
  "${VTK_CMAKE_DIR}"
  "${Slicer3_CMAKE_DIR}"
  ${Slicer3_BINARY_DIR}/CMake
  ${CMAKE_MODULE_PATH}
  )
pieper's avatar
pieper committed
142

143
include("${Slicer3_CMAKE_DIR}/Slicer3PersistenceMacros.cmake")
hliu's avatar
hliu committed
144

145 146 147
# See http://www.cmake.org/Wiki/CMakeMacroParseArguments
include("${Slicer3_CMAKE_DIR}/Slicer3ParseArgumentsMacro.cmake")

148 149 150
## QT
INCLUDE(${Slicer3_CMAKE_DIR}/Slicer3FindQT.cmake)

151 152
#-----------------------------------------------------------------------------
# Top level slicer3 configurations
153
#
154 155 156 157 158
# If CMake >= 2.6.0
SET(CMAKE_RUNTIME_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/bin")
SET(CMAKE_LIBRARY_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/bin")
SET(CMAKE_ARCHIVE_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/lib")

159 160 161

# Do NOT force into the cache, as plugins need to override locally and scoping
# becomes an issue.
162
#set(CMAKE_LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/bin/ 
163
#  CACHE PATH "Single output directory for building all libraries." FORCE)
164
#set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/bin/ 
165 166 167 168
#  CACHE PATH "Single output directory for building all executables." FORCE)

#-----------------------------------------------------------------------------
# Slicer include and libraries subdirectory
169
#
170 171 172
slicer3_set_persistent_property(Slicer3_Libs_LIBRARIES "")
slicer3_set_persistent_property(Slicer3_Base_LIBRARIES "")
slicer3_set_persistent_property(Slicer3_Modules_LIBRARIES "")
173
slicer3_set_persistent_property(Slicer3_QTModules_LIBRARIES "")
174

175 176 177
slicer3_set_persistent_property(Slicer3_Libs_INCLUDE_DIRS "")
slicer3_set_persistent_property(Slicer3_Base_INCLUDE_DIRS "")
slicer3_set_persistent_property(Slicer3_Modules_INCLUDE_DIRS "")
178
slicer3_set_persistent_property(Slicer3_QTModules_INCLUDE_DIRS "")
pieper's avatar
pieper committed
179

180 181 182 183 184 185 186
#-----------------------------------------------------------------------------
# Get sytem name and architecture
#
SET(Slicer3_BUILD NA)
INCLUDE(${Slicer3_CMAKE_DIR}/DiscoverSystemNameAndBits.cmake)
MESSAGE(STATUS "Slicer3_BUILD:${Slicer3_BUILD}")

187
#-----------------------------------------------------------------------------
pieper's avatar
pieper committed
188
# Add the testing directories
189
#
190 191 192 193
OPTION(BUILD_TESTING "Test the project" ON)
SET(Slicer3_BUILD_TESTING ${BUILD_TESTING})
SET(LAUNCH_EXE ${Slicer3_BINARY_DIR}/Slicer3 --launch)
IF(Slicer3_BUILD_TESTING)
194 195 196 197 198
  #IF (NOT BUILDNAME)
  #  SET(BUILDNAME "${Slicer3_BUILD}" CACHE STRING "Name of build on the dashboard")
  #ELSE()
  #  SET(BUILDNAME "${BUILDNAME}" CACHE STRING "Name of build on the dashboard")
  #ENDIF()
199 200 201 202
  ENABLE_TESTING()
  INCLUDE(CTest)
  SET(CXX_TEST_PATH ${CMAKE_RUNTIME_OUTPUT_DIRECTORY})
  MARK_AS_ADVANCED(TCL_TCLSH DART_ROOT)
203 204 205 206 207 208

#-----------------------------------------------------------------------------
# Run test through valgrind: particularly useful for testing modules.
#
option(USE_VALGRIND "Run tests through valgrind." OFF)

209
ENDIF(Slicer3_BUILD_TESTING)
hliu's avatar
hliu committed
210

211 212 213 214 215 216 217 218
#-----------------------------------------------------------------------------
# By default, build with KWWidget
#
option(Slicer3_USE_KWWIDGETS "Build Slicer3 with KWWidgets." ON)

#-----------------------------------------------------------------------------
# Since modules are KWWidgets based, unset there variables
IF (NOT Slicer3_USE_KWWIDGETS)
219 220 221 222
  # Since the module Logic is shared between QTModules and regular Modules,
  # the associated BIN and LIB directory shouldn't be unset
  #UNSET(Slicer3_INSTALL_MODULES_BIN_DIR)
  #UNSET(Slicer3_INSTALL_MODULES_LIB_DIR)
223 224 225 226
  UNSET(Slicer3_INSTALL_MODULES_INCLUDE_DIR)
  UNSET(Slicer3_INSTALL_MODULES_SHARE_DIR)
ENDIF (NOT Slicer3_USE_KWWIDGETS)

227
#-----------------------------------------------------------------------------
228 229 230 231 232
# Libs
# - ITK
# - KWWidgets (pulls in VTK)
#

233 234 235 236
# Relax some constraints related to the build settings file. This was
# preventing people from using the same compiler but with a different generator,
# or just the same compiler installed in a non-standard location.

237 238 239
IF (Slicer3_USE_KWWIDGETS)
  set(SKIP_KWWidgets_BUILD_SETTINGS_FILE 1)
ENDIF(Slicer3_USE_KWWIDGETS)
240 241
set(SKIP_VTK_BUILD_SETTINGS_FILE 1)
set(SKIP_ITK_BUILD_SETTINGS_FILE 1)
242
set(SKIP_Teem_BUILD_SETTINGS_FILE 1)
243 244

#-----------------------------------------------------------------------------
245
## Python
246 247
option(Slicer3_USE_PYTHON "Integrate a python interpreter into Slicer." OFF)
if(Slicer3_USE_PYTHON)
248
  find_package(PythonLibs)
249
endif(Slicer3_USE_PYTHON)
250

251
#-----------------------------------------------------------------------------
252
## ITK
253 254 255 256 257
find_package(ITK REQUIRED)
if(NOT ITK_FOUND)
  message(FATAL_ERROR "Need ITK to build")
endif(NOT ITK_FOUND)
include(${ITK_USE_FILE})
258

259 260 261
#-----------------------------------------------------------------------------
# FindCTK
#
262
SET(git_repo http://github.com/commontk/CTK/raw/master/)
263 264 265 266 267 268 269 270 271 272 273

if (Slicer3_USE_QT)
  SET(file Utilities/CMake/FindCTK.cmake)
  downloadFile(${git_repo}/${file} ${Slicer3_BINARY_DIR}/CMake/FindCTK.cmake)

  FIND_PACKAGE(CTK REQUIRED)
  IF(CTK_FOUND)
    INCLUDE(${CTK_USE_FILE})
  ENDIF()
ENDIF()

274 275 276 277 278 279 280 281
#-----------------------------------------------------------------------------
IF (Slicer3_USE_KWWIDGETS)
  ## KWWidgets
  FIND_PACKAGE(KWWidgets REQUIRED)
  IF(NOT KWWidgets_FOUND)
    MESSAGE(FATAL_ERROR "Need KWWidgets to build")
  ENDIF(NOT KWWidgets_FOUND)
  INCLUDE(${KWWidgets_USE_FILE})
282
  
283
ELSE(Slicer3_USE_KWWIDGETS)
284 285

  # VTK
286 287
  FIND_PACKAGE(VTK REQUIRED)
  IF(NOT VTK_FOUND)
288
    MESSAGE(FATAL_ERROR "Need VTK to build")
289 290 291 292 293 294
  ELSE(NOT VTK_FOUND)
    IF(NOT VTK_USE_QVTK)
      MESSAGE("Please make sure VTK is build with VTK_USE_GUISUPPORT and VTK_USE_QVTK enabled")
    ENDIF(NOT VTK_USE_QVTK)
  ENDIF(NOT VTK_FOUND)
  INCLUDE(${VTK_USE_FILE})
295
  
296 297
ENDIF (Slicer3_USE_KWWIDGETS)

298 299 300
#-----------------------------------------------------------------------------
# Slicer3 is built with cvs head
#
301 302
option(Slicer3_USE_VTK_CVSHEAD "Slicer3 is configurated with cvs head." OFF)
mark_as_advanced(Slicer3_USE_VTK_CVSHEAD)
303

304
#-----------------------------------------------------------------------------
305 306 307 308 309
#
# Call macro defined in ${PROJECT_SOURCE_DIR}/CMake/Slicer3FindQT.cmake
#
SLICER3_SETUP_QT()

310 311 312 313 314 315 316 317
#-----------------------------------------------------------------------------
# Alert the user if both Slicer3_USE_QT and Slicer3_USE_KWWIDGETS are OFF
IF(NOT Slicer3_USE_QT AND NOT Slicer3_USE_KWWIDGETS)
  MESSAGE(FATAL_ERROR "Both Slicer3_USE_QT and Slicer3_USE_KWWIDGETS are OFF. Please, choose one")
ENDIF(NOT Slicer3_USE_QT AND NOT Slicer3_USE_KWWIDGETS)

#-----------------------------------------------------------------------------
# If Slicer3_USE_QT is ON and Slicer3_USE_KWWIDGETS is OFF, complain if VTK_WRAP_TCL is ON
318
# Note: Later on we will expect VTK_WRAP_PYTHON to be ON
319 320 321 322 323 324
IF(Slicer3_USE_QT AND NOT Slicer3_USE_KWWIDGETS)
  IF(VTK_WRAP_TCL)
    MESSAGE(FATAL_ERROR "For now, if Slicer3_USE_QT is ON and Slicer3_USE_KWWIDGETS is OFF, we expect VTK_WRAP_TCL to be OFF")
  ENDIF(VTK_WRAP_TCL)
ENDIF(Slicer3_USE_QT AND NOT Slicer3_USE_KWWIDGETS)

325 326 327 328 329 330 331 332
#-----------------------------------------------------------------------------
# Add Slicer3_USE_PYTHONQT option if Slicer3_USE_QT is ON
IF(Slicer3_USE_QT)
  option(Slicer3_USE_PYTHONQT "Integrate a python-QT interpreter into Slicer." OFF)
  IF(Slicer3_USE_PYTHONQT)
    IF(NOT VTK_WRAP_PYTHON)
      MESSAGE(FATAL_ERROR "Since both Slicer3_USE_QT and Slicer3_USE_PYTHONQT are ON, VTK_WRAP_PYTHON is expected to be ON. Disable Slicer3_USE_PYTHONQT or re-configure VTK with python wrapping.")
    ENDIF(NOT VTK_WRAP_PYTHON)
333 334
    # Enable qMRMLWidgets python wrapping
    SET(qMRMLWidgets_WRAP_PYTHON ON)
335 336 337
  ENDIF(Slicer3_USE_PYTHONQT)
ENDIF(Slicer3_USE_QT)  

338
#-----------------------------------------------------------------------------
339
## Teem
340 341 342 343 344
find_package(Teem REQUIRED)
if(NOT Teem_FOUND)
  message(FATAL_ERROR "Need Teem to build")
endif(NOT Teem_FOUND)
include(${Teem_USE_FILE})
345

346
#-----------------------------------------------------------------------------
347 348 349 350 351
## SlicerLibCurl
find_package(SLICERLIBCURL REQUIRED)
if(SLICERLIBCURL_FOUND)
  include(${SLICERLIBCURL_USE_FILE})
endif(SLICERLIBCURL_FOUND)
352 353

#-----------------------------------------------------------------------------
354 355 356
## BatchMake
option(Slicer3_USE_BatchMake "Build Slicer3 with BatchMake support." OFF)
if(Slicer3_USE_BatchMake)
357 358
  find_package(BatchMake REQUIRED)
  include(${BatchMake_USE_FILE})
359
endif(Slicer3_USE_BatchMake)
360

361
#-----------------------------------------------------------------------------
362 363
## MIDAS
option(Slicer3_USE_MIDAS "Build Slicer3 with MIDAS support." OFF)
364

365
#-----------------------------------------------------------------------------
366 367 368 369 370 371
## OpenIGTLink (Built in Slicer3-lib)
option(Slicer3_USE_OPENIGTLINK "Build Slicer3 with OpenIGTLink support." OFF)
if(Slicer3_USE_OPENIGTLINK)
  find_package(OpenIGTLink REQUIRED)
  include(${OpenIGTLink_USE_FILE})
endif(Slicer3_USE_OPENIGTLINK)
hliu's avatar
hliu committed
372

373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399
#-----------------------------------------------------------------------------
## OpenCV (Built in Slicer3-lib)
option(Slicer3_USE_OPENCV "Build Slicer3 with OpenCV support." OFF)
if(Slicer3_USE_OPENCV)
  find_package(OpenCV REQUIRED)

  IF(OPENCV_BUILD_SETTINGS_FILE AND NOT SKIP_OPENCV_BUILD_SETTINGS_FILE)
    INCLUDE(${CMAKE_ROOT}/Modules/CMakeImportBuildSettings.cmake)
    CMAKE_IMPORT_BUILD_SETTINGS(${OPENCV_BUILD_SETTINGS_FILE})
  ENDIF(OPENCV_BUILD_SETTINGS_FILE AND NOT SKIP_OPENCV_BUILD_SETTINGS_FILE)
  
  # Add compiler flags needed to use OPENCV.
  SET(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${OPENCV_REQUIRED_C_FLAGS}")
  SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${OPENCV_REQUIRED_CXX_FLAGS}")
  SET(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} ${OPENCV_REQUIRED_LINK_FLAGS}")
  SET(CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} ${OPENCV_REQUIRED_LINK_FLAGS}")
  SET(CMAKE_MODULE_LINKER_FLAGS "${CMAKE_MODULE_LINKER_FLAGS} ${OPENCV_REQUIRED_LINK_FLAGS}")
  
  # Add include directories needed to use OPENCV.
  INCLUDE_DIRECTORIES(BEFORE ${OPENCV_INCLUDE_DIRS})
  
  # Add link directories needed to use OPENCV.
  LINK_DIRECTORIES(${OPENCV_LIBRARY_DIRS})
  #include(${OPENCV_USE_FILE})
endif(Slicer3_USE_OPENCV)


400 401
#-----------------------------------------------------------------------------
# Need some Tcl/Tk info
402 403 404 405 406 407 408 409 410 411 412 413
IF (VTK_WRAP_TCL)
  include("${VTK_CMAKE_DIR}/vtkTclTkMacros.cmake")
  VTK_GET_TCL_TK_VERSION(TCL_TK_MAJOR_VERSION TCL_TK_MINOR_VERSION)
  set(TCL_TK_VERSION_DOT "${TCL_TK_MAJOR_VERSION}.${TCL_TK_MINOR_VERSION}")
  set(TCL_TK_VERSION "${TCL_TK_MAJOR_VERSION}${TCL_TK_MINOR_VERSION}")
  IF(Slicer3_USE_KWWIDGETS)
    include("${KWWidgets_CMAKE_DIR}/KWWidgetsTclTkMacros.cmake")
    incr_tcl_get_version(INCR_TCL_MAJOR_VERSION INCR_TCL_MINOR_VERSION)
    set(INCR_TCL_VERSION_DOT "${INCR_TCL_MAJOR_VERSION}.${INCR_TCL_MINOR_VERSION}")
    set(INCR_TCL_VERSION "${INCR_TCL_MAJOR_VERSION}${INCR_TCL_MINOR_VERSION}")
  ENDIF(Slicer3_USE_KWWIDGETS)
ENDIF (VTK_WRAP_TCL)
414

415
#-----------------------------------------------------------------------------
barre's avatar
barre committed
416 417 418
# Generate the default setup paths scripts.
# Generate some useful scripts that can be used to setup various environment 
# variables and launch the executable properly against external packages.
419
#
420 421 422 423 424
IF (Slicer3_USE_KWWIDGETS)
  include("${KWWidgets_CMAKE_DIR}/KWWidgetsPathsMacros.cmake")
  set(extra_dirs
    "${Teem_DIR}/bin"
    "${BatchMake_DIR}/bin"
425
    "${OpenIGTLink_DIR}/bin"
426 427 428 429 430 431 432 433
    "${Slicer3_HOME}/${Slicer3_INSTALL_PLUGINS_BIN_DIR}"
    "${Slicer3_HOME}/${Slicer3_INSTALL_PLUGINS_LIB_DIR}"
    "${Slicer3_HOME}/${Slicer3_INSTALL_MODULES_BIN_DIR}"
    "${Slicer3_HOME}/${Slicer3_INSTALL_MODULES_LIB_DIR}"
    )
  kwwidgets_generate_setup_paths_scripts(
    "${CMAKE_RUNTIME_OUTPUT_DIRECTORY}" "Slicer3SetupPaths"
    "${extra_dirs}"
434
  )
435
ENDIF (Slicer3_USE_KWWIDGETS)
barre's avatar
barre committed
436

437
#-----------------------------------------------------------------------------
barre's avatar
barre committed
438 439 440 441 442
# VTK 5.0 does not have VTK_CMAKE_DIR
# Alternatively you could use KWWidget's wrapping, which encapsulate
# the differences between various VTK versions:
#  INCLUDE("${KWWidgets_CMAKE_DIR}/KWWidgetsWrappingMacros.cmake")
#  KWWidgets_WRAP_TCL(${LIB_NAME} LIB_TCL_SRCS "${LIB_SRCS}" "")
443
#
444 445 446 447 448 449
IF (Slicer3_USE_KWWIDGETS)
  if(NOT VTK_CMAKE_DIR)
    set(VTK_CMAKE_DIR "${VTK_SOURCE_DIR}/CMake")
  endif(NOT VTK_CMAKE_DIR)
  include("${VTK_CMAKE_DIR}/vtkWrapTcl.cmake")
ENDIF (Slicer3_USE_KWWIDGETS)
450

451 452
#-----------------------------------------------------------------------------
# Check versions of VTK to track CVS HEAD
453
#
454 455 456 457 458 459 460 461 462 463 464 465 466 467
IF (Slicer3_USE_KWWIDGETS)
  find_package(VTK REQUIRED)
  if(EXISTS ${VTK_CMAKE_DIR}/VTKVersionMacros.cmake)
    include(${VTK_CMAKE_DIR}/VTKVersionMacros.cmake)
  else(EXISTS ${VTK_CMAKE_DIR}/VTKVersionMacros.cmake)
    #MESSAGE("Using local version of VTKVersionMacros for compatibility.")
    include(${Slicer3_SOURCE_DIR}/Scripts/VTKVersionMacros.cmake)
  endif(EXISTS ${VTK_CMAKE_DIR}/VTKVersionMacros.cmake)

  vtk_get_source_revision_and_date(VTKsource_revision VTKsource_date)
  if(VTKsource_revision LESS 1.2196)
    message(FATAL_ERROR "Sorry, your VTK library was last updated on ${VTKsource_date}. Its source revision, according to vtkKWWidgetsVersion.h, is ${VTKsource_revision}. Please update to a newer revision.")
  endif(VTKsource_revision LESS 1.2196)
ENDIF (Slicer3_USE_KWWIDGETS)
468

469 470
#-----------------------------------------------------------------------------
# These packages may exist within the Slicer3 source tree
lorensen's avatar
lorensen committed
471
#
472 473 474
set(TCLAP_DIR ${Slicer3_BINARY_DIR}/Libs/SlicerExecutionModel/tclap)
set(ModuleDescriptionParser_DIR ${Slicer3_BINARY_DIR}/Libs/SlicerExecutionModel/ModuleDescriptionParser)
set(GenerateCLP_DIR ${Slicer3_BINARY_DIR}/Libs/SlicerExecutionModel/GenerateCLP)
475 476 477
set(GenerateLM_DIR ${Slicer3_BINARY_DIR}/Libs/GenerateLM)
set(LoadableModule_DIR ${Slicer3_BINARY_DIR}/Libs/LoadableModule)
set(vtkITK_DIR ${Slicer3_BINARY_DIR}/Libs/vtkITK)
478

jcfr's avatar
jcfr committed
479 480 481 482 483 484 485 486 487 488 489 490 491 492
#-----------------------------------------------------------------------------
# Qt Loadable Modules
#
IF(Slicer3_USE_QT)
  OPTION(Slicer3_BUILD_QTLOADABLEMODULES "Build Slicer3 QT Loadable Modules" ON)
  IF(Slicer3_BUILD_QTLOADABLEMODULES)
    ADD_DEFINITIONS(-DSlicer3_BUILD_QTLOADABLEMODULES)
    set(Slicer3_INSTALL_QTLOADABLEMODULES_BIN_DIR "${Slicer3_INSTALL_LIB_DIR}/QTLoadableModules")
    set(Slicer3_INSTALL_QTLOADABLEMODULES_LIB_DIR "${Slicer3_INSTALL_LIB_DIR}/QTLoadableModules")
    set(Slicer3_INSTALL_QTLOADABLEMODULES_INCLUDE_DIR "${Slicer3_INSTALL_INCLUDE_DIR}/QTLoadableModules")
    set(Slicer3_INSTALL_QTLOADABLEMODULES_SHARE_DIR "${Slicer3_INSTALL_SHARE_DIR}/QTLoadableModules")
  ENDIF(Slicer3_BUILD_QTLOADABLEMODULES)
ENDIF(Slicer3_USE_QT)

493 494 495
# --------------------------------------------------------------------------
# Configure and install headers

496
CONFIGURE_FILE(
497 498 499 500
  ${CMAKE_CURRENT_SOURCE_DIR}/vtkSlicerConfigure.h.in 
  ${CMAKE_CURRENT_BINARY_DIR}/vtkSlicerConfigure.h
  )

501 502 503 504 505 506
CONFIGURE_FILE(
  ${CMAKE_CURRENT_SOURCE_DIR}/vtkSlicerVersionConfigure.h.in 
  ${CMAKE_CURRENT_BINARY_DIR}/vtkSlicerVersionConfigure.h
  )

CONFIGURE_FILE(
507 508
  ${CMAKE_CURRENT_SOURCE_DIR}/Scripts/runValgrind.sh.in 
  ${CMAKE_CURRENT_BINARY_DIR}/Scripts/runValgrind.sh
509 510
  )

511 512 513 514 515
CONFIGURE_FILE(
  ${CMAKE_CURRENT_SOURCE_DIR}/Scripts/runValgrindForOneModule.sh.in 
  ${CMAKE_CURRENT_BINARY_DIR}/Scripts/runValgrindForOneModule.sh
  )

516
CONFIGURE_FILE(
517 518 519 520
  ${CMAKE_CURRENT_SOURCE_DIR}/Scripts/computeCodeCoverageLocally.sh.in 
  ${CMAKE_CURRENT_BINARY_DIR}/Scripts/computeCodeCoverageLocally.sh
  )

521 522 523 524 525
CONFIGURE_FILE(
  ${CMAKE_CURRENT_SOURCE_DIR}/Scripts/computeCodeCoverageForOneTest.sh.in 
  ${CMAKE_CURRENT_BINARY_DIR}/Scripts/computeCodeCoverageForOneTest.sh
  )

526
CONFIGURE_FILE(
527 528 529
  ${CMAKE_CURRENT_SOURCE_DIR}/Scripts/runExperimentalOffScreen.sh.in 
  ${CMAKE_CURRENT_BINARY_DIR}/Scripts/runExperimentalOffScreen.sh
  )
530

531 532 533 534 535 536
INCLUDE_DIRECTORIES(
  "${CMAKE_CURRENT_SOURCE_DIR}"
  "${CMAKE_CURRENT_BINARY_DIR}"
  )

INSTALL(FILES 
537 538 539 540
  "${CMAKE_CURRENT_BINARY_DIR}/vtkSlicerConfigure.h"
  DESTINATION ${Slicer3_INSTALL_INCLUDE_DIR} COMPONENT Development
  )

541 542 543 544 545
INSTALL(FILES 
  "${CMAKE_CURRENT_BINARY_DIR}/vtkSlicerVersionConfigure.h"
  DESTINATION ${Slicer3_INSTALL_INCLUDE_DIR} COMPONENT Development
  )

546 547 548 549 550 551 552 553
#-----------------------------------------------------------------------------
# Generate Slicer3Version.txt

INCLUDE(${Slicer3_CMAKE_DIR}/Slicer3TodayMacro.cmake)

# Get build time
TODAY(Slicer3_BUILDDATE)

554
# Note that Slicer_BUILD is set above
555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586

SET(Slicer3_WC_URL NA)
SET(Slicer3_WC_REVISION 0)

# Get SVN info
FIND_PACKAGE(Subversion)
IF(NOT Subversion_FOUND)
  MESSAGE(FATAL_ERROR "error: Install SVN and try to re-configure")
ENDIF(NOT Subversion_FOUND)

# Case where Slicer is checkout using SVN
IF (EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/.svn)
  Subversion_WC_INFO(${CMAKE_CURRENT_SOURCE_DIR} Slicer3)
  CONFIGURE_FILE(
    ${CMAKE_CURRENT_SOURCE_DIR}/Slicer3Version.txt.in 
    ${Slicer3_HOME}/lib/Slicer3/Slicer3Version.txt
    )
ENDIF()

# Case where Slicer is checkout using Git-SVN
IF (EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/.git)
  FIND_PACKAGE(Git)
  IF(NOT Git_FOUND)
    MESSAGE(FATAL_ERROR "error: Failed to locate Git")
  ENDIF(NOT Git_FOUND)
  Git_WC_INFO(${CMAKE_CURRENT_SOURCE_DIR} Slicer3)
  CONFIGURE_FILE(
    ${CMAKE_CURRENT_SOURCE_DIR}/Slicer3Version.txt.in
    ${Slicer3_HOME}/lib/Slicer3/Slicer3Version.txt
    )
ENDIF()

587

588
#-----------------------------------------------------------------------------
pieper's avatar
pieper committed
589 590
# Subdirectories
#
591 592
add_subdirectory(Libs)
add_subdirectory(Base)
593
add_subdirectory(Resources)
594

595
#-----------------------------------------------------------------------------
596
# At this point, let's not have the applications and modules guess which
597 598
# include paths or libraries they need, but use Slicer3_*_LIBRARIES and
# Slicer3_*_INCLUDE_DIRS instead. As far as modules are concerned, both
599 600 601 602 603
# variables are actually set automatically by the import script when building
# against a Slicer3 build or installed tree. When in-source, we need to
# set both variables now. Retrieve them from the persistent property cache
# since they were collected in each subdir (which makes it impossible to
# use normal variables, since a new scope is created in each subdir).
604 605 606
#
slicer3_get_persistent_property(Slicer3_Libs_LIBRARIES Slicer3_Libs_LIBRARIES)
slicer3_get_persistent_property(Slicer3_Base_LIBRARIES Slicer3_Base_LIBRARIES)
607

608 609
slicer3_get_persistent_property(Slicer3_Libs_INCLUDE_DIRS Slicer3_Libs_INCLUDE_DIRS)
slicer3_get_persistent_property(Slicer3_Base_INCLUDE_DIRS Slicer3_Base_INCLUDE_DIRS)
pieper's avatar
pieper committed
610

611 612 613 614 615
#-----------------------------------------------------------------------------
# Module Logic

INCLUDE("${Slicer3_CMAKE_DIR}/Slicer3ModuleLogicMacros.cmake")

616
IF (NOT Slicer3_USE_KWWIDGETS)
617 618 619
  # KWWidgets and Qt modules share the same logics typically located in the
  # kwwdigets modules. When KWWidgets is not build, the logic are missing for Qt
  # we need to manually add them:
620 621 622 623 624 625
  # Loop through Modules subdirectory and try to include Logic subdirectory if it exists
  FILE(GLOB modules_subdirs RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} Modules/*)
  FOREACH(subdir ${modules_subdirs})
    IF(IS_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/${subdir}/Logic)
      ADD_SUBDIRECTORY(${subdir}/Logic)
    ENDIF()
626
    FILE(GLOB subsubdirs RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} ${subdir}/*)
627
    FOREACH(subsubdir ${subsubdirs})
628 629
      IF(IS_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/${subsubdir}/Logic)
        ADD_SUBDIRECTORY(${subsubdir}/Logic)
630 631
      ENDIF()
    ENDFOREACH()
632 633
  ENDFOREACH()
ENDIF()
634 635


636 637 638 639
#-----------------------------------------------------------------------------
# Modules and CLI
#
option(Slicer3_BUILD_CLI "Build Slicer3 CLI Plugins" ON)
640 641 642
IF (Slicer3_USE_KWWIDGETS)
  option(Slicer3_BUILD_MODULES "Build Slicer3 Modules" ON)
ENDIF (Slicer3_USE_KWWIDGETS)
643

barre's avatar
barre committed
644
include("${Slicer3_CMAKE_DIR}/Slicer3PluginsMacros.cmake")
pieper's avatar
pieper committed
645

646 647 648 649 650 651 652 653 654 655 656 657 658
IF (Slicer3_USE_KWWIDGETS)
  include("${Slicer3_CMAKE_DIR}/Slicer3ModulesMacros.cmake")
  
  if(Slicer3_BUILD_MODULES)
    add_subdirectory(Modules)
  else(Slicer3_BUILD_MODULES)
    # if Slicer3_BUILD_CLI is ON, we still need at least the CommandLineModule
    # so that we can have CLI, without all the other modules
    if(Slicer3_BUILD_CLI)
      add_subdirectory(Modules/CommandLineModule)
    endif(Slicer3_BUILD_CLI)
  endif(Slicer3_BUILD_MODULES)
ENDIF (Slicer3_USE_KWWIDGETS)
659
#-----------------------------------------------------------------------------
jcfr's avatar
jcfr committed
660
# Qt Loadable Modules
661
#
jcfr's avatar
jcfr committed
662 663 664
IF(Slicer3_USE_QT AND Slicer3_BUILD_QTLOADABLEMODULES)
  add_subdirectory(QTModules)
ENDIF(Slicer3_USE_QT AND Slicer3_BUILD_QTLOADABLEMODULES)
665

666 667 668 669
#-----------------------------------------------------------------------------
# Applications need to be built after Modules to capture the TractTracing in
# the correct ordering.
#
670
add_subdirectory(Applications)
671

672 673 674
#-----------------------------------------------------------------------------
# Testing
#
675 676 677
if(Slicer3_BUILD_TESTING)
  add_subdirectory(Testing)
endif(Slicer3_BUILD_TESTING)
pieper's avatar
pieper committed
678

679
# Install testing data
andy's avatar
andy committed
680

681 682 683 684 685 686 687 688
install(DIRECTORY
  Testing
  DESTINATION ${Slicer3_INSTALL_SHARE_DIR} COMPONENT Development
  PATTERN ".svn" EXCLUDE
  PATTERN "CMakeLists.txt" EXCLUDE
  )

#-----------------------------------------------------------------------------
689
# Launcher for slicer
690
#
691

692 693
# let's build the launcher for Kww, KwwAndQt and also QtOnly slicer ...
ADD_SUBDIRECTORY(Utilities/Launcher)
694

695 696 697 698 699
# Compute Slicer3_QT_PLUGIN_PATH used to configure launch.tcl.in
SET(Slicer3_QT_PLUGIN_PATH "")
IF(Slicer3_USE_QT)
  SET(designer_launcher_project_name SlicerQT)
  GET_TARGET_PROPERTY(output_directory ${designer_launcher_project_name} LIBRARY_OUTPUT_DIRECTORY)
700
  SET(Slicer3_QT_PLUGIN_PATH ${output_directory})
701 702
ENDIF(Slicer3_USE_QT)

703 704 705 706 707 708 709 710
CONFIGURE_FILE(
  ${Slicer3_SOURCE_DIR}/launch.tcl.in
  "${Slicer3_BINARY_DIR}/${Slicer3_INSTALL_LIB_DIR}/launch.tcl"
  )
INSTALL(
  FILES "${Slicer3_BINARY_DIR}/${Slicer3_INSTALL_LIB_DIR}/launch.tcl"
  DESTINATION ${Slicer3_INSTALL_LIB_DIR}
  )
711

712 713 714 715 716 717 718 719
#-----------------------------------------------------------------------------
# Launcher for QTDesigner
#

IF (Slicer3_USE_QT)
  add_subdirectory(Utilities/Designer)
ENDIF (Slicer3_USE_QT)

720
#-----------------------------------------------------------------------------
721
# Package slicer
722
#
723
add_subdirectory(Utilities/Package)
andy's avatar
andy committed
724

725
#-----------------------------------------------------------------------------
726
# Documentation
727
#
728 729 730 731
option(BUILD_DOCUMENTATION "Build Slicer3 Documentation" OFF)
if(BUILD_DOCUMENTATION)
  add_subdirectory(Utilities/Doxygen)
endif(BUILD_DOCUMENTATION)
andy's avatar
andy committed
732

733 734 735 736 737 738 739
#-----------------------------------------------------------------------------
# Setup file for setting custom ctest vars
CONFIGURE_FILE(
  ${Slicer3_SOURCE_DIR}/CTestCustom.cmake.in
  ${Slicer3_BINARY_DIR}/CTestCustom.cmake
  @ONLY
  )
740

741

742
#-----------------------------------------------------------------------------
743 744
# Set up for building against a Slicer3 build tree and a Slicer3 installation 
#
745 746
include(${Slicer3_SOURCE_DIR}/GenerateSlicer3Config.cmake)

747 748 749
configure_file(${Slicer3_SOURCE_DIR}/CTestConfig.cmake
  ${Slicer3_BINARY_DIR}/${Slicer3_INSTALL_LIB_DIR}/CTestConfig.cmake COPYONLY IMMEDIATE)

750 751 752
configure_file(${Slicer3_SOURCE_DIR}/UseSlicer3.cmake.in
  ${Slicer3_BINARY_DIR}/UseSlicer3.cmake COPYONLY IMMEDIATE)

753 754 755 756 757
configure_file(${Slicer3_SOURCE_DIR}/CMake/RemoveTemporaryFiles.cmake.in
  ${Slicer3_BINARY_DIR}/CMake/RemoveTemporaryFiles.cmake @ONLY IMMEDIATE)
configure_file(${Slicer3_SOURCE_DIR}/CMake/Slicer3SampleBuildTest.cmake.in
  ${Slicer3_BINARY_DIR}/CMake/Slicer3SampleBuildTest.cmake @ONLY)

758 759
install(FILES
  #   ${Slicer3_BINARY_DIR}/Slicer3BuildSettings.cmake
760
  ${Slicer3_SOURCE_DIR}/CTestConfig.cmake
761 762
  ${Slicer3_BINARY_DIR}/UseSlicer3.cmake
  ${Slicer3_BINARY_DIR}/Utilities/Slicer3Config.cmake
hayes's avatar
hayes committed
763
  ${Slicer3_BINARY_DIR}/lib/Slicer3/Slicer3Version.txt
764
  DESTINATION ${Slicer3_INSTALL_LIB_DIR}
765 766
  COMPONENT Development
  )