ParaView issueshttps://gitlab.kitware.com/paraview/paraview/-/issues2017-12-04T12:46:53-05:00https://gitlab.kitware.com/paraview/paraview/-/issues/15188Add a cylinder as a clip type2017-12-04T12:46:53-05:00Kitware RobotAdd a cylinder as a clip type**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15188). Further discussion may take place here.**
---
Please add a cylinder as a clip type. This would be applicable to the cli...**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15188). Further discussion may take place here.**
---
Please add a cylinder as a clip type. This would be applicable to the clip filter.https://gitlab.kitware.com/paraview/paraview/-/issues/15189Drag and drop in the pipeline browser.2017-12-04T12:46:53-05:00Kitware RobotDrag and drop in the pipeline browser.**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15189). Further discussion may take place here.**
---
I had a user suggest/request that drag and drop be implemented in the pipe...**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15189). Further discussion may take place here.**
---
I had a user suggest/request that drag and drop be implemented in the pipeline browser. This would allow inputs to filters to be reorganized with the mouse.
Low priority.https://gitlab.kitware.com/paraview/paraview/-/issues/15190Add a deselect button2017-12-04T12:46:53-05:00Kitware RobotAdd a deselect button**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15190). Further discussion may take place here.**
---
When a user is zoomed in close, and selects a cell or point, there is no w...**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15190). Further discussion may take place here.**
---
When a user is zoomed in close, and selects a cell or point, there is no way to unselect without zooming out. This is obnoxious. Please add an icon on the toolbar, looking like Select Cells On, without the green triangle.https://gitlab.kitware.com/paraview/paraview/-/issues/15192Tear away sections in Properties Panel2017-12-04T12:46:53-05:00Kitware RobotTear away sections in Properties Panel**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15192). Further discussion may take place here.**
---
Please allow a user to tear off sub sections of the Properties Panel. Not ...**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15192). Further discussion may take place here.**
---
Please allow a user to tear off sub sections of the Properties Panel. Not sure how, but allow the user to restore the setup of the Properties Panel.https://gitlab.kitware.com/paraview/paraview/-/issues/15193Surface representation doesn't respect blanked cells in a vtkStructuredGrid2017-12-04T12:46:53-05:00Kitware RobotSurface representation doesn't respect blanked cells in a vtkStructuredGrid**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15193). Further discussion may take place here.**
---
Surface representation doesn't respect blanked cells in a vtkStructuredGri...**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15193). Further discussion may take place here.**
---
Surface representation doesn't respect blanked cells in a vtkStructuredGrid. It simply shows the outer faces, rather than the outer faces for non-blanked cells.https://gitlab.kitware.com/paraview/paraview/-/issues/15197Cannot record tests rrom ParaView after updates to QtTesting2017-12-04T12:46:53-05:00Kitware RobotCannot record tests rrom ParaView after updates to QtTesting**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15197). Further discussion may take place here.**
---
Trying to record a test from Tools menu, raises the following error:
...**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15197). Further discussion may take place here.**
---
Trying to record a test from Tools menu, raises the following error:
No acive windows has been found
https://gitlab.kitware.com/paraview/paraview/-/issues/15198Allow (legacy) Xdmf writer to write all time steps.2017-12-04T12:46:53-05:00Kitware RobotAllow (legacy) Xdmf writer to write all time steps.**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15198). Further discussion may take place here.**
---
The current vtkXmdfWriter proxy does not expose the "WriteAllTimeSteps" pr...**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15198). Further discussion may take place here.**
---
The current vtkXmdfWriter proxy does not expose the "WriteAllTimeSteps" property that would optionally allow to export all the time steps of the input data to the Xdmf file.https://gitlab.kitware.com/paraview/paraview/-/issues/15199EnSightReader: Change input file2017-12-04T12:46:52-05:00Kitware RobotEnSightReader: Change input file**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15199). Further discussion may take place here.**
---
Subject: [Paraview] EnSightReader: Change input file
--------------------...**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15199). Further discussion may take place here.**
---
Subject: [Paraview] EnSightReader: Change input file
------------------------
From: Ian Krukow <i.krukow@tu-braunschweig.de>
Date: Tue, Nov 11, 2014 at 8:39 AM
To: ParaView <paraview@paraview.org>
Hi all,
I want to apply the same pipeline to a series of Ensight data files in order to save extractions in a different format. For the first file, this works fine. For the second file, I thought I could change the input file by changing the CaseFileName attribute:
reader.CaseFileName = nextfile
But when I run
reader.UpdatePipeline()
I get a segmentation fault. This depends neither on the file, nor on the pipeline following.
I tried a workaround by building up a new pipeline for each file. It works, and as I have only two files by now, it is ok to do that, but for more files, memory usage would explode. Therefore, my question is: Is it possible only to change the input file of the EnSightReader, while keeping the pipeline?
Kind regards
Ian
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView
Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview
----------
From: Utkarsh Ayachit <utkarsh.ayachit@kitware.com>
Date: Fri, Nov 14, 2014 at 10:39 PM
To: Ian Krukow <i.krukow@tu-braunschweig.de>
Cc: ParaView <paraview@paraview.org>
Ability to change filenames depends on specific reader
implementations. I am not entire familiar with the internal
implementation, but if you have a couple of sample datasets/script to
reproduce the segfault, I can check if its a minor fix to the reader
to enable this or if it just can't support it.
Either case, you should be able to call Delete(reader) to delete old
reader once you're done with it to avoid memory bloat.
Utkarsh
----------
From: Ian Krukow <i.krukow@tu-braunschweig.de>
Date: Tue, Nov 18, 2014 at 5:20 AM
To: Utkarsh Ayachit <utkarsh.ayachit@kitware.com>
Ok, the problem obviously does depend on the input files to a certain degree. I use TAU as a flow solver (from the DLR, Germany), and it gives me two solution files, one for the fluid solution, one for the surface data. The problem with the EnSightReader occurs, when I try to switch from one category to the other (no matter, which direction). However, there is no problem loading another file of the same category, even with another geometry.
I attach two solution file sets, fluid and surface, with a short pvpython script to reproduce the error (sorry, that they are not smaller, but I do not create any grids of my own).
The behaviour is the same with ParaView versions 3.14.1 and 4.2.0.
Kind regards
Ianhttps://gitlab.kitware.com/paraview/paraview/-/issues/15207Bug: Wrong selection of nodes on quadratic mesh2017-12-04T12:46:52-05:00Kitware RobotBug: Wrong selection of nodes on quadratic mesh**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15207). Further discussion may take place here.**
---
Attached test_selection_on_nodes_0_0.vtu file contains quaratic mesh, sele...**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15207). Further discussion may take place here.**
---
Attached test_selection_on_nodes_0_0.vtu file contains quaratic mesh, selection of the nodes on this mesh is wrong.
To test it click on "select points on" and draw a rectangle around some nodes on a cylindrical face..
The selected nodes are not those wanted, but are scattered in the mesh.https://gitlab.kitware.com/paraview/paraview/-/issues/15211TechPlot VTK ParaView Problems2017-12-04T12:46:52-05:00Kitware RobotTechPlot VTK ParaView Problems**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15211). Further discussion may take place here.**
---
I've attempted to modify these ASCII files that my brain is just mush now....**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15211). Further discussion may take place here.**
---
I've attempted to modify these ASCII files that my brain is just mush now. Either ParaView doesn't work well with Mac OS X or Paraview has some serious issues.
TechPlot doesn't read in. Then VTK crashes. I would appreciate a second pair of eyes to tell me what is wrong with my files. It's a simple, single element example. I'll have more of course but it doesn't seem to like even a single element FEA ASCII file.
I've attached several modified ASCII .dat files and .vtkhttps://gitlab.kitware.com/paraview/paraview/-/issues/15212Bug: PointSprite representation: error rises in server/client mode2017-12-04T12:46:52-05:00Kitware RobotBug: PointSprite representation: error rises in server/client mode**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15212). Further discussion may take place here.**
---
- Launch ParaView in server/client mode:
./mpirun -n 1 pvserver
Conn...**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15212). Further discussion may take place here.**
---
- Launch ParaView in server/client mode:
./mpirun -n 1 pvserver
Connect to localhost
- Load Point Sprite Plugin
- Create any primitive, box for example.
- Set Display Representation to Point Sprite.
=> ParaView/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, line 710 vtkCompositeDataPipeline (0x6f641c0): Input port 0 of algorithm
vtkAppendPolyData(0x6251000) has 0 connections but is not optional.https://gitlab.kitware.com/paraview/paraview/-/issues/15214Ruler label not settable2017-12-04T12:46:52-05:00Kitware RobotRuler label not settable**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15214). Further discussion may take place here.**
---
The color, font, size and boldness of the Ruler length should be changeabl...**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15214). Further discussion may take place here.**
---
The color, font, size and boldness of the Ruler length should be changeable. It isn't. Please add this functionality.
Sources/ Sphere. Apply.
Sources/ Ruler. Apply.
Notice you can't modify the line color or the number color/ font/ size/ etc.https://gitlab.kitware.com/paraview/paraview/-/issues/15215Crash with h5parts data and histogram2017-12-04T12:46:52-05:00Kitware RobotCrash with h5parts data and histogram**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15215). Further discussion may take place here.**
---
We have found a show stopper bug that creates a crash when running h5part ...**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15215). Further discussion may take place here.**
---
We have found a show stopper bug that creates a crash when running h5part data into the histogram filter. This is needed for an active project. Here is how to replicate:
* Remote server, I used 8 pvservers, Linux, master. Does not fail local
server. (Note to self - redsky)
* Open DoNotRelease-particles.h5part. Xarray == x, Yarray == y, Zarray == z. All vars on, apply. Ask me for this file, I may give it to Kitware. (Note to self tomH/case2.)
>>Note - Next, we want to threshold the data such that for some time step, there is no output from the threshold filter. This will change over time.
* Threshold. Scalars id. Minimul == 1000, Maximum == 1,000,000. Apply.
>> Note - you can play time forward and backward, all is well.
* Go to last timestep. (otherwise, the histogram filter is grayed out.)
* Histogram filter. Apply.
* First timestep.
Crash.
This needs to be in 4.3. Please talk to me if that isn't possible.
Thanks!
https://gitlab.kitware.com/paraview/paraview/-/issues/15216CGNS reader is dreadfully slow2017-12-04T12:46:52-05:00Kitware RobotCGNS reader is dreadfully slow**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15216). Further discussion may take place here.**
---
The CGNS reader is painfully, reduculiously, dreadfully slow. It takes ab...**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15216). Further discussion may take place here.**
---
The CGNS reader is painfully, reduculiously, dreadfully slow. It takes about 30 seconds to read the header for a toy dataset, and with this dataset the following line gets written out a few hundred times.
*** Warning:The file being read is more recent that the CGNS library used ***
Figure out what is going on, and fix it. Further, turn off the warning for production builds.
File available upon request. File name is aero3d.cgns.
https://gitlab.kitware.com/paraview/paraview/-/issues/17859Mesh Nodes Numbering and xml2017-12-01T19:13:45-05:00Talal AlotaibiMesh Nodes Numbering and xmlHello all,
I wrote a post-processing subroutine (Finite Element Method) in HDf5 format. I wrote also xml file to read the data in Paraview:
if (rank.eq.0) then
print*,'| ...WRITING: '// ou //'/sol' &
...Hello all,
I wrote a post-processing subroutine (Finite Element Method) in HDf5 format. I wrote also xml file to read the data in Paraview:
if (rank.eq.0) then
print*,'| ...WRITING: '// ou //'/sol' &
//trim(adjustl(fnum))//'.xmf'
print*,'|'
mesh_filename= 'Mesh.h5'
sol_filename= 'sol'//trim(adjustl(fnum))//'.h5'
GridName = 'sol'//trim(adjustl(fnum))
xml_filename = 'paraview'// ou //'/sol'//trim(adjustl(fnum))//'.xmf'
i1 = index(GridName,' ')-1
ixmf=987
open(ixmf,file=xml_filename)
write(ixmf,10) GridName(1:i1)
write(ixmf,40) num
write(ixmf,20) neles,neles,9, trim(mesh_filename)//':/Elements'
write(ixmf,30) nodes,3, trim(mesh_filename)//':/Nodes'
write(ixmf,50) 'Phase-field', 'Scalar', 'Node', nodes, trim(sol_filename)//':/Mu'
write(ixmf,50) 'Pressure', 'Scalar', 'Node', nodes, trim(sol_filename)//':/P'
write(ixmf,50) 'Displacement', 'Vector', 'Node', nodes*3, trim(sol_filename)//':/U'
write(ixmf,50) 'Velocity', 'Vector', 'Node', nodes*3, trim(sol_filename)//':/V'
write(ixmf,50) 'GradMu', 'Vector', 'Node', nodes*3, trim(sol_filename)//':/GradMu'
write(ixmf,50) 'Stress', 'Tensor', 'Node', 9*nodes, trim(sol_filename)//':/Stress'
write(ixmf,50) 'Strain', 'Tensor', 'Node', 9*nodes, trim(sol_filename)//':/Strain'
write(ixmf,60)
close(ixmf)
10 format( '<?xml version="1.0" ?>',/,&
'<!-- DOCTYPE Xdmf SYSTEM "Xdmf.dtd" [] -->',/,&
'<Xdmf xmlns:xi="http://www.w3.org/2003/XInclude" Version="2">',/,&
' <Domain>',/,&
' <Grid Name="', A ,'" Type="Unstructured">')
20 format( ' <Topology Type="Quadrilateral" Dimensions="2" NumberOfElements="', i9, ' " BaseOffset="0">',/,&
' <DataItem Dimensions="', i9,i2, ' " NumberType="Int" Format="HDF">', A, '</DataItem>',/,&
' </Topology>')
30 format( ' <Geometry Type="XYZ">',/,&
' <DataItem Dimensions="', i9,i2, '" NumberType="Float" Precision="8" Format="HDF">', A, '</DataItem>',/,&
' </Geometry>')
40 format( ' <Time Type="Single" Value="', I10, '"/>')
50 format( ' <Attribute Name="', A,'" AttributeType="', A, '" Center="', A, '">',/,&
' <DataItem Dimensions="', i9, '" NumberType="Float" Precision="8" Format="HDF">', A, '</DataItem>',/,&
' </Attribute>')
60 format( ' </Grid>',/,&
' </Domain>',/,&
'</Xdmf>')
When I display the data in Paraview, I got this:
![Screen_Shot_2017-11-29_at_6.09.54_PM](/uploads/8e8f96728acfbfe732cc7d5ac9927af9/Screen_Shot_2017-11-29_at_6.09.54_PM.png)
I think I have issue either the nodes numbering in each element or the xml format. Could anyone help?
Thank you,
Talalhttps://gitlab.kitware.com/paraview/paraview/-/issues/15218ParaViewWeb needs ability to specify multiple data directories2017-11-30T11:38:44-05:00Kitware RobotParaViewWeb needs ability to specify multiple data directories**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15218). Further discussion may take place here.**
---
Allowing only a single, top-level data directory for a paraviewweb instanc...**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15218). Further discussion may take place here.**
---
Allowing only a single, top-level data directory for a paraviewweb instance is too restrictive. We need a way to specify multiple directories of data for users to browse, each with their own "short name" to be shown when looking at "Home" in the web file browser.https://gitlab.kitware.com/paraview/paraview/-/issues/15219ParaViewWeb needs tooltips for main ui buttons2017-11-30T11:38:44-05:00Kitware RobotParaViewWeb needs tooltips for main ui buttons**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15219). Further discussion may take place here.**
---
Tooltips need to be added to main toolbar and proxy editor toolbar buttons...**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15219). Further discussion may take place here.**
---
Tooltips need to be added to main toolbar and proxy editor toolbar buttons so users have a bit more guidance when looking at the UI. This affects Web Visualizer and any application that might use the proxy editor widget.https://gitlab.kitware.com/paraview/paraview/-/issues/15221ENH: Shortcuts to rotate the camera of -90° and 90°2017-11-30T11:38:44-05:00Kitware RobotENH: Shortcuts to rotate the camera of -90° and 90°**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15221). Further discussion may take place here.**
---
Improvement to be able to rotate the camera of exactly 90°, icons clockwis...**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15221). Further discussion may take place here.**
---
Improvement to be able to rotate the camera of exactly 90°, icons clockwise and counter-clockwise are needed.https://gitlab.kitware.com/paraview/paraview/-/issues/15224The text for "LOD Resolution" setting is incorrect.2017-11-30T11:38:44-05:00Kitware RobotThe text for "LOD Resolution" setting is incorrect.**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15224). Further discussion may take place here.**
---
The text for "LOD Resolution" on the "Render View" settings tab in the Set...**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15224). Further discussion may take place here.**
---
The text for "LOD Resolution" on the "Render View" settings tab in the Settings dialog is incorrect. It says 0 is maximum resolution and 1 is minimum. In reality, its inverted.https://gitlab.kitware.com/paraview/paraview/-/issues/15227Additional ruler work - cosmetics2017-11-30T11:38:44-05:00Kitware RobotAdditional ruler work - cosmetics**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15227). Further discussion may take place here.**
---
We need the ruler modified as follows:
- [ ] Add a toolbar button to brin...**This issue was created automatically from an original [Mantis Issue](http://paraview.org/Bug/view.php?id=15227). Further discussion may take place here.**
---
We need the ruler modified as follows:
- [ ] Add a toolbar button to bring up the ruler.
- [x] Add a multiplier to the ruler. For instance, if the dataset space is in inches, and a user wants to display centimeters, let them do it.
- [x] Add an optional label to the ruler. Allow the ruler to include units. For instance, instead of "1.0", I want the user to be able to show "1.0 inches".
- [x] Allow the ruler text color, font, font size, etc. to be changed.
- [x] Allow the ruler line color and width to be changed. Current color is hard to see on white.
- [x] Default the line width to two pixels thick.
- [ ] *Optional:* Allow the ruler post label to be independently changed regarding color, font, font size, etc.
5.2 (SC-16)