ParaView issueshttps://gitlab.kitware.com/paraview/paraview/-/issues2021-08-10T16:56:59-04:00https://gitlab.kitware.com/paraview/paraview/-/issues/20827Spack builds of paraview@master failing to find CLI11 external dependency2021-08-10T16:56:59-04:00Ethan StamSpack builds of paraview@master failing to find CLI11 external dependency@utkarsh.ayachit @cory.quammen
On July 2nd (July 1st builds passed), our spack builds of `paraview@master` started failing. Checking the logs for today's builds, they all failed during the configure step for paraview with:
```console
...@utkarsh.ayachit @cory.quammen
On July 2nd (July 1st builds passed), our spack builds of `paraview@master` started failing. Checking the logs for today's builds, they all failed during the configure step for paraview with:
```console
CMake Warning at VTK/CMake/vtkModule.cmake:4360 (find_package):
By not providing "FindCLI11.cmake" in CMAKE_MODULE_PATH this project has
asked CMake to find a package configuration file provided by "CLI11", but
CMake did not find one.
Could not find a package configuration file provided by "CLI11" with any of
the following names:
CLI11Config.cmake
cli11-config.cmake
Add the installation prefix of "CLI11" to CMAKE_PREFIX_PATH or set
"CLI11_DIR" to a directory containing one of the above files. If "CLI11"
provides a separate development package or SDK, be sure it has been
installed.
Call Stack (most recent call first):
VTK/CMake/vtkModule.cmake:4960 (vtk_module_find_package)
VTK/CMake/vtkModule.cmake:4831 (vtk_module_third_party_external)
VTK/ThirdParty/cli11/CMakeLists.txt:1 (vtk_module_third_party)
CMake Error at VTK/CMake/vtkModule.cmake:4366 (message):
Could not find the CLI11 external dependency.
Call Stack (most recent call first):
VTK/CMake/vtkModule.cmake:4960 (vtk_module_find_package)
VTK/CMake/vtkModule.cmake:4831 (vtk_module_third_party_external)
VTK/ThirdParty/cli11/CMakeLists.txt:1 (vtk_module_third_party)
-- Configuring incomplete, errors occurred!
```5.10 (Fall 2021)https://gitlab.kitware.com/paraview/paraview/-/issues/20816catalyst 2.0 Python fails when using VTK_PYTHON_OPTIONAL_LINK2021-08-11T13:47:40-04:00Utkarsh Ayachitcatalyst 2.0 Python fails when using VTK_PYTHON_OPTIONAL_LINKIf `VTK_PYTHON_OPTIONAL_LINK` is ON, which is default, all Catalyst 2.0 tests with Python fails with
```
ImportError: /home/utkarsh/Kitware/ParaView3/ParaViewBin-Qt5/lib/python3.8/site-packages/paraview/modules/vtkRemotingCore.so: undef...If `VTK_PYTHON_OPTIONAL_LINK` is ON, which is default, all Catalyst 2.0 tests with Python fails with
```
ImportError: /home/utkarsh/Kitware/ParaView3/ParaViewBin-Qt5/lib/python3.8/site-packages/paraview/modules/vtkRemotingCore.so: undefined symbol: _Py_NoneStruct
```
This happens is overcome is VTK_PYTHON_OPTIONAL_LINK is OFF, or dlopening with RTLD_GLOBAL.
```diff
diff --git a/src/catalyst/catalyst_api.c b/src/catalyst/catalyst_api.c
index c5cd99b..283bfc2 100644
--- a/src/catalyst/catalyst_api.c
+++ b/src/catalyst/catalyst_api.c
@@ -363,7 +363,7 @@ catalyst_handle_t handle_open(const char* directory, const char* libname)
snprintf(full_library_path, path_len, "%s/libcatalyst-%s.so", directory, libname);
- catalyst_handle_t handle = dlopen(full_library_path, RTLD_LAZY | RTLD_LOCAL);
+ catalyst_handle_t handle = dlopen(full_library_path, RTLD_LAZY | RTLD_GLOBAL);
if (!handle)
{
printf("failed to open library: %s\n", dlerror());
```
Not sure what's the best way to address this. This is causing the Catalyst2 tests to fail: https://open.cdash.org/viewTest.php?onlyfailed&buildid=73109845.10 (Fall 2021)Ben BoeckelBen Boeckelhttps://gitlab.kitware.com/paraview/paraview/-/issues/20811Find data - Edit Properties is redundant2021-08-05T21:10:41-04:00W. Alan ScottFind data - Edit Properties is redundantThe Find Data - Edit Properties button is listed twice in Find Data. One is below Cell and Point labels, one is below Interactive Selection. I bet the lower one was suppose to edit the Interactive Selection, not Labels.
This is with m...The Find Data - Edit Properties button is listed twice in Find Data. One is below Cell and Point labels, one is below Interactive Selection. I bet the lower one was suppose to edit the Interactive Selection, not Labels.
This is with master, June 25, 2021.5.10 (Fall 2021)Cory Quammencory.quammen@kitware.comCory Quammencory.quammen@kitware.comhttps://gitlab.kitware.com/paraview/paraview/-/issues/20805Mesh quality filter is failing for tetra10's2023-04-12T14:42:59-04:00W. Alan ScottMesh quality filter is failing for tetra10'sThe mesh quality filter is failing for tetra10s. Here is how to replicate.
* 5.9.1, builtin server, Linux
* Load tetra_4_and_10.exo. Apply.
* Mesh Quality filter. Tet Quality Measure: Scaled Jacobian.
* Paint by Quality.
The two cy...The mesh quality filter is failing for tetra10s. Here is how to replicate.
* 5.9.1, builtin server, Linux
* Load tetra_4_and_10.exo. Apply.
* Mesh Quality filter. Tet Quality Measure: Scaled Jacobian.
* Paint by Quality.
The two cylinders should look (about) the same.
We suspect there are two issues here.
* We need to update the Verdict library. The library has to first move from internal to Sandia git, to external git.
* However, there appears to be a bigger issue. In a spreadsheet/ Cells, all of the Quadratic Tets appear to have a quality of 0. This needs to be fixed.
[tetra_4_and_10.exo](/uploads/cb5f5e6443194cf6b3204df9814f8239/tetra_4_and_10.exo)5.10 (Fall 2021)Yohann Bearzi (Kitware)Yohann Bearzi (Kitware)https://gitlab.kitware.com/paraview/paraview/-/issues/20804GenerateGlobalIds fail to identify duplicated distributed points2021-09-23T20:30:07-04:00Mathieu Westphal (Kitware)GenerateGlobalIds fail to identify duplicated distributed pointsGenerateGlobalIds fails to identify duplicated distributed points and do not give them the same values.
Steps to reproduce:
- `mpirun -np 2 ./binpvserver`
- run paraview, connect to server
- Sphere, Apply,
- GenerateGlobalIds, apply
- C...GenerateGlobalIds fails to identify duplicated distributed points and do not give them the same values.
Steps to reproduce:
- `mpirun -np 2 ./binpvserver`
- run paraview, connect to server
- Sphere, Apply,
- GenerateGlobalIds, apply
- Color by GlobalPointIds
- There is a discontinuity, there should not be
- Select a duplicated point on the discontinuity, show selected element in spreadsheet, GlobalPointIds are indeed different, they should be the same
![image](/uploads/43f3d2275ed72641a8942980b9362199/image.png)5.10 (Fall 2021)Utkarsh AyachitUtkarsh Ayachithttps://gitlab.kitware.com/paraview/paraview/-/issues/20802Partition balancer2021-09-23T19:20:08-04:00Utkarsh AyachitPartition balancervtkPartitionedDataSetCollection (PDC) and vtkParitionedDataSet (PD) do not require that all ranks have some number of paritions. However, I am sure we'll encounter old filters that do not handle this correctly and we may need to provide ...vtkPartitionedDataSetCollection (PDC) and vtkParitionedDataSet (PD) do not require that all ranks have some number of paritions. However, I am sure we'll encounter old filters that do not handle this correctly and we may need to provide a temporary workaround till those filters are fixed to avoid deadlocks. To address this, lets create a new filter that simply ensures all ranks have same number of partitions for the input PDC or PD.5.10 (Fall 2021)Yohann Bearzi (Kitware)Yohann Bearzi (Kitware)https://gitlab.kitware.com/paraview/paraview/-/issues/20797IOSS reader does not allow single file opens2021-08-25T10:24:11-04:00W. Alan ScottIOSS reader does not allow single file opensThe IOSS reader does lot allow a user to open subsets of their files. This is important for debugging. An example of what I want is:
* Open g1s1. Now, try to open only file 00. You get the whole dataset.
* Open g1s1. Now, try to ope...The IOSS reader does lot allow a user to open subsets of their files. This is important for debugging. An example of what I want is:
* Open g1s1. Now, try to open only file 00. You get the whole dataset.
* Open g1s1. Now, try to open the first 8 files. (We are trying to do a binary search). You get the whole dataset - 8 times.
@utkarsh.ayachit Marking for 5.11, as we have a workaround (use the Exodus reader).5.10 (Fall 2021)Utkarsh AyachitUtkarsh Ayachithttps://gitlab.kitware.com/paraview/paraview/-/issues/20796Spack build of paraview master fails to find catalyst_impl.c.in at configure2021-06-24T14:41:25-04:00Ethan StamSpack build of paraview master fails to find catalyst_impl.c.in at configure@utkarsh.ayachit @cory.quammen
Our nightly builds of `paraview@master` started failing at configure with:
```console
-- Detecting Fortran/C Interface - Found GLOBAL and MODULE mangling
CMake Error: File /catalyst_impl.c.in does not ex...@utkarsh.ayachit @cory.quammen
Our nightly builds of `paraview@master` started failing at configure with:
```console
-- Detecting Fortran/C Interface - Found GLOBAL and MODULE mangling
CMake Error: File /catalyst_impl.c.in does not exist.
CMake Error at ThirdParty/catalyst/vtkcatalyst/catalyst/cmake/catalyst-macros.cmake:58 (configure_file):
configure_file Problem configuring file
Call Stack (most recent call first):
Clients/InSitu/catalyst/CMakeLists.txt:31 (catalyst_implementation)
CMake Error at Clients/InSitu/catalyst/CMakeLists.txt:40 (add_library):
add_library cannot create ALIAS target "ParaView::catalyst-paraview"
because target "catalyst-paraview" does not already exist.
CMake Error at Clients/InSitu/catalyst/CMakeLists.txt:42 (target_link_libraries):
Cannot specify link libraries for target "catalyst-paraview" which is not
built by this project.
-- Configuring incomplete, errors occurred!
```
May be caused by the changes in https://gitlab.kitware.com/paraview/paraview/-/merge_requests/4984, since this started failing last week.5.10 (Fall 2021)Ben BoeckelBen Boeckelhttps://gitlab.kitware.com/paraview/paraview/-/issues/20795Slice with Plane is crashing2021-11-11T16:04:37-05:00W. Alan ScottSlice with Plane is crashingThe filter Slice with Plane is crashing. I don't see how to run it without crashing. Here is what I did:
* 5.8.0 and 5.9.1, Linux, builtin server.
* disk_out_ref.exo. Apply.
* Slice with Plane. Apply.
Crash.
Further, I tried creati...The filter Slice with Plane is crashing. I don't see how to run it without crashing. Here is what I did:
* 5.8.0 and 5.9.1, Linux, builtin server.
* disk_out_ref.exo. Apply.
* Slice with Plane. Apply.
Crash.
Further, I tried creating a Source/ Plane, and could not figure out how to have two inputs to the Slice with Plane filter.
@cory.quammen @utkarsh.ayachit Set for 5.11, maybe we want to look at this for 5.10?5.11 (Spring 2022)Spiros TsalikisSpiros Tsalikishttps://gitlab.kitware.com/paraview/paraview/-/issues/20790Exodus file opens with 5.9.1, not with master (IOSS reader)2021-06-22T14:40:12-04:00W. Alan ScottExodus file opens with 5.9.1, not with master (IOSS reader)I have a file that opens with the Exodus 5.9.1 reader, but not with the master (pre 5.10.0) IOSS reader. Here is how to replicate:
* Master, builtin server, Linux.
* Open file kolsky_test_0deg_fullmodel_v07.g. It will fail, with the fo...I have a file that opens with the Exodus 5.9.1 reader, but not with the master (pre 5.10.0) IOSS reader. Here is how to replicate:
* Master, builtin server, Linux.
* Open file kolsky_test_0deg_fullmodel_v07.g. It will fail, with the following output:
```
( 46.045s) [paraview ] vtkIossReader.cxx:727 ERR| vtkIossReader (0x5703410): Error in UpdateTimeInformation:
ERROR: There are multiple blocks or sets with the same name defined in the database file '/snip/kolsky_test_0deg_fullmodel_v07.g'.
Both NodeSet 1008 and ElementBlock 9 are named 'incident_bar_end'. All names must be unique.
( 46.068s) [paraview ] vtkExecutive.cxx:753 ERR| vtkPVCompositeDataPipeline (0x5722350): Algorithm vtkIossReader(0x5703410) returned failure for request: vtkInformation (0x574cb80)
Debug: Off
Modified Time: 338825
Reference Count: 1
Registered Events: (none)
Request: REQUEST_INFORMATION
ALGORITHM_AFTER_FORWARD: 1
FORWARD_DIRECTION: 0
( 46.370s) [paraview ] vtkExecutive.cxx:753 ERR| vtkPVCompositeDataPipeline (0x5722350): Algorithm vtkIossReader(0x5703410) returned failure for request: vtkInformation (0x5304060)
Debug: Off
Modified Time: 394748
Reference Count: 1
Registered Events: (none)
Request: REQUEST_DATA
FROM_OUTPUT_PORT: 0
ALGORITHM_AFTER_FORWARD: 1
```
File has been sent to Utkarsh.5.10 (Fall 2021)Utkarsh AyachitUtkarsh Ayachithttps://gitlab.kitware.com/paraview/paraview/-/issues/20789New Colormap Request (Turbo)2021-07-28T17:17:43-04:00Joel A. KuleszaNew Colormap Request (Turbo)Anton Mikhailov, Senior Software Engineer, Daydream "recently" published a rainbow-like colormap [here](https://ai.googleblog.com/2019/08/turbo-improved-rainbow-colormap-for.html).
It is attached to this issue under the Apache-2.0 licen...Anton Mikhailov, Senior Software Engineer, Daydream "recently" published a rainbow-like colormap [here](https://ai.googleblog.com/2019/08/turbo-improved-rainbow-colormap-for.html).
It is attached to this issue under the Apache-2.0 license as it is issued [here](https://gist.github.com/mikhailov-work/ee72ba4191942acecc03fe6da94fc73f). Please consider adding this as one of the colormaps in the "Rainbow" colormap subcategory.
CC: @ethan.stam @patchett2002
[Turbo.json](/uploads/7aaca542493052204fe0a8652db706ad/Turbo.json)5.11 (Spring 2022)Yohann Bearzi (Kitware)Yohann Bearzi (Kitware)https://gitlab.kitware.com/paraview/paraview/-/issues/20782Ghost cell generator, in parallel, failing with some cell types2021-08-24T19:33:01-04:00W. Alan ScottGhost cell generator, in parallel, failing with some cell typesthe ghost cell generator is failing in parallel when working with some cell types. Here is how to replicate:
* 5.9.1, remote server, Linux.
* Sources/ Unstructured Cell Type. Hex. Apply.
* Ghost Cell Generator. Apply.
* Opacity == 0....the ghost cell generator is failing in parallel when working with some cell types. Here is how to replicate:
* 5.9.1, remote server, Linux.
* Sources/ Unstructured Cell Type. Hex. Apply.
* Ghost Cell Generator. Apply.
* Opacity == 0.2
This is what it should look like.
* Select the Unstructured Cell Type. We are still showing the output of the Ghost Cell Generator.
* Tets (Good). Wedges (good). Pyramids (good). Quadric Tets (bad). Quadric Hexes (bad). Quadric Wedges (bad). Quadric Pyramids (bad).
This must be fixed before the D3 filter is deprecated.5.10 (Fall 2021)Yohann Bearzi (Kitware)Yohann Bearzi (Kitware)https://gitlab.kitware.com/paraview/paraview/-/issues/20781Add EULA for Looking Glass plugin2021-12-19T21:22:54-05:00Utkarsh AyachitAdd EULA for Looking Glass pluginAdd EULA popup when this plugin is loaded (similar to NVIDIA Index plugin) warning about license term / EULA etc.
cc: @mwestphal @berkgeveciAdd EULA popup when this plugin is loaded (similar to NVIDIA Index plugin) warning about license term / EULA etc.
cc: @mwestphal @berkgeveci5.10 (Fall 2021)Cory Quammencory.quammen@kitware.comCory Quammencory.quammen@kitware.comhttps://gitlab.kitware.com/paraview/paraview/-/issues/20778PlotOverLine in PVSM fails2021-08-24T21:50:10-04:00Ethan StamPlotOverLine in PVSM fails@utkarsh.ayachit @cory.quammen
I can't reload a `pvsm` state that has `PlotOverLine`. Interestingly, saving the state as a python state is fine. In the filter, I am using the `Sample at Cell Boundaries` option. When reloading the state...@utkarsh.ayachit @cory.quammen
I can't reload a `pvsm` state that has `PlotOverLine`. Interestingly, saving the state as a python state is fine. In the filter, I am using the `Sample at Cell Boundaries` option. When reloading the state, I get the error repeatedly:
```
ERROR: In /opt/glr/paraview/paraview-ci/source-paraview/VTK/Common/ExecutionModel/vtkExecutive.cxx, line 753
vtkPVCompositeDataPipeline (0x6000003f5500): Algorithm vtkPProbeFilter(0x7f986ecab0b0) returned failure for request: vtkInformation (0x60000223ae80)
Debug: Off
Modified Time: 1422074
Reference Count: 1
Registered Events: (none)
Request: REQUEST_DATA_OBJECT
FROM_OUTPUT_PORT: 0
ALGORITHM_AFTER_FORWARD: 1
FORWARD_DIRECTION: 0
```
Steps to reproduce:
- Download latest nightly binary for macos
- File -> Open -> Examples/can.ex2
- Filters -> PlotOverLine
- In PlotOverLine properties:
* Change sampling pattern to `Sample at Cell Boundaries` -> Apply
- File -> Save State (as `.pvsm`)
- Reset ParaView
- File -> Load State -> Use File Names From State -> OK5.10 (Fall 2021)Yohann Bearzi (Kitware)Yohann Bearzi (Kitware)https://gitlab.kitware.com/paraview/paraview/-/issues/20777`Hover Cells On` broken with can.ex2 example dataset2021-09-21T16:39:45-04:00Ethan Stam`Hover Cells On` broken with can.ex2 example dataset@utkarsh.ayachit @cory.quammen
`Hover Cells On` does not work with the can.ex2 example dataset, may fail with other `vtkPartitionedDataSetCollection`. I get the error:
```
ERROR: In /opt/glr/paraview/paraview-ci/source-paraview/VTK/Co...@utkarsh.ayachit @cory.quammen
`Hover Cells On` does not work with the can.ex2 example dataset, may fail with other `vtkPartitionedDataSetCollection`. I get the error:
```
ERROR: In /opt/glr/paraview/paraview-ci/source-paraview/VTK/Common/DataModel/vtkMultiBlockDataSet.cxx, line 78
vtkMultiBlockDataSet (0x60000c0dc000): vtkPartitionedDataSetCollection cannot be added as a block.
```
Steps to reproduce:
- File -> Open -> Examples/can.ex2 -> Apply
- Toggle `Hover Cells On` for RenderView1
- Move Cursor over the dataset
I hit this on MacOS with a nightly binary:
```
Client Information:
Version: 5.9.1-1209-ge0ef3e46c9
VTK Version:
Qt Version: 5.15.2
vtkIdType size: 64bits
Embedded Python: On
Python Library Path: /Users/stam/Applications/ParaView-5.9.1-1209-ge0ef3e46c9.app/Contents/Libraries/lib/python3.9
Python Library Version: 3.9.5 (default, Jun 6 2021, 01:02:46) [Clang 12.0.0 (clang-1200.0.32.29)]
Python Numpy Support: On
Python Numpy Path: /Users/stam/Applications/ParaView-5.9.1-1209-ge0ef3e46c9.app/Contents/Python/numpy
Python Numpy Version: 1.20.3
Python Matplotlib Support: On
Python Matplotlib Path: /Users/stam/Applications/ParaView-5.9.1-1209-ge0ef3e46c9.app/Contents/Python/matplotlib
Python Matplotlib Version: 3.2.1
Python Testing: Off
MPI Enabled: On
ParaView Build ID: superbuild b69f8df2e47647ef4e91fa17adce63292b9c1374 (master)
Disable Registry: Off
Test Directory:
Data Directory:
OpenGL Vendor: NVIDIA Corporation
OpenGL Version: 4.1 NVIDIA-12.0.24 355.11.10.50.10.103
OpenGL Renderer: NVIDIA GeForce GT 750M OpenGL Engine
Connection Information:
Remote Connection: No
```5.10 (Fall 2021)Utkarsh AyachitUtkarsh Ayachithttps://gitlab.kitware.com/paraview/paraview/-/issues/20775IOSS: CGNS incorrect side blocks2021-06-22T17:44:49-04:00Utkarsh AyachitIOSS: CGNS incorrect side blocks* open sparc-volume.cgns.36.* using IOSS reader
* uncheck all blocks and check **wall** under Sets. Apply
* You'll get a shell with gaps. The gaps are incorrect.* open sparc-volume.cgns.36.* using IOSS reader
* uncheck all blocks and check **wall** under Sets. Apply
* You'll get a shell with gaps. The gaps are incorrect.5.10 (Fall 2021)Utkarsh AyachitUtkarsh Ayachithttps://gitlab.kitware.com/paraview/paraview/-/issues/20773Make it possible to cancel export of extracts2021-09-08T21:53:13-04:00Cory Quammencory.quammen@kitware.comMake it possible to cancel export of extractsJust as it is possible to abort saving of an animation, make it possible to abort the export of extracts. Also, provide a progress bar to show the state of the extract export.Just as it is possible to abort saving of an animation, make it possible to abort the export of extracts. Also, provide a progress bar to show the state of the extract export.5.10 (Fall 2021)Utkarsh AyachitUtkarsh Ayachithttps://gitlab.kitware.com/paraview/paraview/-/issues/20769Plot Over Line can fail in parallel2021-08-24T17:26:34-04:00Cory Quammencory.quammen@kitware.comPlot Over Line can fail in parallelThe rework of **Plot Over Line** !4795 can fail when run in parallel. Steps to reproduce:
* Start ParaView, connect to remote server running on 2 ranks (`mpiexec -np 2 pvserver`)
* Add **Unstructured Cell Types** source. Change **Block ...The rework of **Plot Over Line** !4795 can fail when run in parallel. Steps to reproduce:
* Start ParaView, connect to remote server running on 2 ranks (`mpiexec -np 2 pvserver`)
* Add **Unstructured Cell Types** source. Change **Block Dimensions** property to [11, 10, 10]
* Add **Plot Over Line** filter. Change **Sampling Pattern** to "Sample At Cell Boundaries". Click Apply.
* You will get the following warning message:
```
ERROR: In /Users/cory.local/src/paraview/VTK/Filters/Parallel/vtkPProbeFilter.cxx, line 108
vtkPProbeFilter (0x612000b4d240): vtkPProbeFilter assumes the whole geometry dataset (which determines positions to probe) is available on all nodes, however nodes 0 is different than node 1
```
Looking at the line samples in the Render View, there are only two points from rank 1 and both are marked as not valid (vtkValidPointMask == 0).5.10 (Fall 2021)Yohann Bearzi (Kitware)Yohann Bearzi (Kitware)https://gitlab.kitware.com/paraview/paraview/-/issues/20763Add assemblies to the Multiblock inspector2023-08-28T15:14:53-04:00W. Alan ScottAdd assemblies to the Multiblock inspectorPlease add assemblies to the multiblock inspector.
OK to push to 5.11. If so, please mark as required.Please add assemblies to the multiblock inspector.
OK to push to 5.11. If so, please mark as required.5.12 (Winter 2023)https://gitlab.kitware.com/paraview/paraview/-/issues/20761IOSS reader fails with different multifile datasets with same name2021-06-22T17:04:03-04:00W. Alan ScottIOSS reader fails with different multifile datasets with same nameThe Exodus reader will read two datasets, with the same name, but different file counts. For instance, using can.exo, it would properly read can.e.4.[0-3] if can.e.2.[0-1] were in the same directory. This can easily happen as an analys...The Exodus reader will read two datasets, with the same name, but different file counts. For instance, using can.exo, it would properly read can.e.4.[0-3] if can.e.2.[0-1] were in the same directory. This can easily happen as an analyst is ramping up the size of a simulation.
The IOSS reader fails under these conditions.
Super easy way to replicate.
* Copy g1s1.* into a sandbox directory.
* cp g1s1-10fps.e.16.00 g1s1-10fps.e.2.0
* cp g1s1-10fps.e.16.01 g1s1-10fps.e.2.1
* master, Linux, builtin server.
* Open g1s1-10fps.e.16. It will fail as follows:
```
ERROR: In /snip/5.10.0-alpha3/ParaView5/VTK/IO/Ioss/vtkIossReader.cxx, line 611
vtkIossReader (0x5422ce0): Filenames specified use inconsistent naming schemes. 'g1s1-10fps.e.2.0' has incorrect processor-count (2), '16' was expected.
ERROR: In /snip/5.10.0-alpha3/ParaView5/VTK/Common/ExecutionModel/vtkExecutive.cxx, line 753
vtkPVCompositeDataPipeline (0x5663550): Algorithm vtkIossReader(0x5422ce0) returned failure for request: vtkInformation (0x5210d30)
Debug: Off
Modified Time: 385946
Reference Count: 1
Registered Events: (none)
Request: REQUEST_DATA
FROM_OUTPUT_PORT: 0
ALGORITHM_AFTER_FORWARD: 1
FORWARD_DIRECTION: 0
```5.10 (Fall 2021)Utkarsh AyachitUtkarsh Ayachit