SMTK issueshttps://gitlab.kitware.com/cmb/smtk/-/issues2019-10-17T22:27:51-04:00https://gitlab.kitware.com/cmb/smtk/-/issues/244Loading Attribute Resources from File results in bad association information2019-10-17T22:27:51-04:00Robert M. O'BaraLoading Attribute Resources from File results in bad association informationLoad in a saved model resource and a saved attribute resource that has associations with respects to the model. If you try to get the model components stored in the associations (or Reference Items) you will get nullptr's returned even ...Load in a saved model resource and a saved attribute resource that has associations with respects to the model. If you try to get the model components stored in the associations (or Reference Items) you will get nullptr's returned even if the component information is correct.
Other related behavior show CMB 6.1 - if the model resource was closed in ModelBuilder and then reloaded the associated components would not be displayed in the GUIRobert M. O'BaraRobert M. O'Barahttps://gitlab.kitware.com/cmb/smtk/-/issues/241Improve Changing Opacity in Assign Colors GUI2019-06-06T16:13:23-04:00Robert M. O'BaraImprove Changing Opacity in Assign Colors GUIThere are 2 places to change opacity and they are not linked together.There are 2 places to change opacity and they are not linked together.Robert M. O'BaraRobert M. O'Barahttps://gitlab.kitware.com/cmb/smtk/-/issues/239SMTK Item Find Methods in Attribute and Items limitations2019-06-06T16:14:10-04:00Robert M. O'BaraSMTK Item Find Methods in Attribute and Items limitationsAttribute::find will not take GroupItems into consideration
ValueItem::findChild will not take GroupItems into consideration
GroupItem::find will not take ValueItems into consideration.
Also you can not just get top level active items.Attribute::find will not take GroupItems into consideration
ValueItem::findChild will not take GroupItems into consideration
GroupItem::find will not take ValueItems into consideration.
Also you can not just get top level active items.Robert M. O'BaraRobert M. O'Barahttps://gitlab.kitware.com/cmb/smtk/-/issues/139Improvements for Active model logic2017-04-28T20:26:55-04:00Haocheng LIUImprovements for Active model logic* [x] save/close operator would list all models(active and non-active)
* [x] model operator(Ex. Add-Image) should only be allowed to applied to active model
* [x] BUG: switch active model and load image would not trigger model tree to up...* [x] save/close operator would list all models(active and non-active)
* [x] model operator(Ex. Add-Image) should only be allowed to applied to active model
* [x] BUG: switch active model and load image would not trigger model tree to update.SMTK 1.1Haocheng LIUHaocheng LIUhttps://gitlab.kitware.com/cmb/smtk/-/issues/116Setting min water or land causes crashes2018-04-11T01:59:25-04:00Robert M. O'BaraSetting min water or land causes crashesWhen Amanda tried this on the mac it was consistently crashingWhen Amanda tried this on the mac it was consistently crashingSMTK 1.1Jacob BeckerJacob Beckerhttps://gitlab.kitware.com/cmb/smtk/-/issues/110Update Issue with Entity List Model View2017-01-24T22:42:19-05:00Robert M. O'BaraUpdate Issue with Entity List Model ViewWhile modifying a polygon model (deleting edges) - it was possible to create 0 edges entries in the List ViewWhile modifying a polygon model (deleting edges) - it was possible to create 0 edges entries in the List ViewSMTK 1.1Amanda HinesAmanda Hineshttps://gitlab.kitware.com/cmb/smtk/-/issues/109Remove buttons from Reshape Edge and Create Edge Interactively2016-12-08T17:10:14-05:00Robert M. O'BaraRemove buttons from Reshape Edge and Create Edge InteractivelyThese are the make straight line and make box buttonsThese are the make straight line and make box buttonsSMTK 1.1Amanda HinesAmanda Hineshttps://gitlab.kitware.com/cmb/smtk/-/issues/108Demoting a model vertex prevents other future demotions2017-01-24T22:43:44-05:00Robert M. O'BaraDemoting a model vertex prevents other future demotionsYou can select a vertex to be demoted, but after the operation is applied, you can not select any other vertices to be demoted.
Ideally this operation should allow for multiple demotions.You can select a vertex to be demoted, but after the operation is applied, you can not select any other vertices to be demoted.
Ideally this operation should allow for multiple demotions.SMTK 1.1Amanda HinesAmanda Hineshttps://gitlab.kitware.com/cmb/smtk/-/issues/106Need the ability to delete boundary model entities2017-04-25T16:29:24-04:00Robert M. O'BaraNeed the ability to delete boundary model entitiesCurrently we can optionally delete model entities that use the "to be deleted entity" as part of their boundary - we need to also add an option that delete the entities that are used only on the boundary of the "to be deleted" entity - f...Currently we can optionally delete model entities that use the "to be deleted entity" as part of their boundary - we need to also add an option that delete the entities that are used only on the boundary of the "to be deleted" entity - for example if we are delete an edge, if this option is on, we would delete each of its vertices iff they are not used by another model edgeSMTK 1.1Haocheng LIUHaocheng LIUhttps://gitlab.kitware.com/cmb/smtk/-/issues/84Color Information is not being saved in SMTK Model File2017-03-02T17:22:20-05:00Robert M. O'BaraColor Information is not being saved in SMTK Model FileWhen I load in an exodus file and set colors to the model entities and then export the model as smtk - when I load the smtk file back in the color information is no longer set.When I load in an exodus file and set colors to the model entities and then export the model as smtk - when I load the smtk file back in the color information is no longer set.SMTK 1.1David ThompsonDavid Thompsonhttps://gitlab.kitware.com/cmb/smtk/-/issues/82Default value for the ADH Surfacewater python exporter script is incorrect if...2018-04-11T01:59:25-04:00Amanda HinesDefault value for the ADH Surfacewater python exporter script is incorrect if workflows aren't installed in ModelBuilder directory on Mac OSI installed the workflows in a different directory than the ModelBuilder Contents directory on my Mac (10.11.5). When I went to export the simulation, the default script was set to ADHSurfacewater.py but I received the following error wh...I installed the workflows in a different directory than the ModelBuilder Contents directory on my Mac (10.11.5). When I went to export the simulation, the default script was set to ADHSurfacewater.py but I received the following error when I tried to export:
```
No python script specified
```
When I set it to the script in the workflows directory, it exported (the box showed the full path to the script). Is it possible to update that default box with the path of the loaded template?John TourtellottJohn Tourtellotthttps://gitlab.kitware.com/cmb/smtk/-/issues/78Split edge called from reshape can fail bizarrely2017-02-13T13:28:15-05:00David ThompsonSplit edge called from reshape can fail bizarrelyPromoting the first vertex of an edge being tweaked can result in missing segments and incorrect model vertices.Promoting the first vertex of an edge being tweaked can result in missing segments and incorrect model vertices.David ThompsonDavid Thompsonhttps://gitlab.kitware.com/cmb/smtk/-/issues/76Filigree Mesher not working in ModelBuilder on Windows2016-09-26T16:31:26-04:00Amanda HinesFiligree Mesher not working in ModelBuilder on WindowsHere are the steps to replicate:
1. Create a closed simple set of edges interactively
2. Create all faces
3. Set the global size in the filigree mesh panel
4. Hit Mesh - nothing happens
This is just an issue on Windows. Filigree...Here are the steps to replicate:
1. Create a closed simple set of edges interactively
2. Create all faces
3. Set the global size in the filigree mesh panel
4. Hit Mesh - nothing happens
This is just an issue on Windows. Filigree works correctly on Mac. This is a build from 9/9/16.David ThompsonDavid Thompsonhttps://gitlab.kitware.com/cmb/smtk/-/issues/75Reshape edge interaction does not work first time2016-11-30T14:55:48-05:00David ThompsonReshape edge interaction does not work first timeTo reproduce:
1. Create polygon session and model and import the chesapeake bay image (100x100).
2. Create edges from contours. Set the minimum length to 200; otherwise, accept the defaults.
3. Zoom in to model edge 4 (a short one on the...To reproduce:
1. Create polygon session and model and import the chesapeake bay image (100x100).
2. Create edges from contours. Set the minimum length to 200; otherwise, accept the defaults.
3. Zoom in to model edge 4 (a short one on the left)
4. Select the "Edge – Reshape" operator and click "select edge"
5. Select model edge 4. At this point, you should see the edge highlighted but will not be able to interact with it. If you cancel editing and re-select the edge, then interaction should work.Yumin YuanYumin Yuanhttps://gitlab.kitware.com/cmb/smtk/-/issues/61Dealing with Images2016-09-15T15:55:11-04:00Robert M. O'BaraDealing with ImagesThere is no way to set image display properties if a model entity was selected (no way selecting the image back)There is no way to set image display properties if a model entity was selected (no way selecting the image back)Yumin YuanYumin Yuanhttps://gitlab.kitware.com/cmb/smtk/-/issues/58List/Tree View switching causes improper display2016-09-08T12:47:03-04:00Robert M. O'BaraList/Tree View switching causes improper displayRead in a polygon model from file
Switch back and forth between the tree and list views (you might have do this a couple of times) and you will see only the session be listed (not the model(s) and its contents)Read in a polygon model from file
Switch back and forth between the tree and list views (you might have do this a couple of times) and you will see only the session be listed (not the model(s) and its contents)Yumin YuanYumin Yuanhttps://gitlab.kitware.com/cmb/smtk/-/issues/56Ability to set an operator's GUI Apply button properly2018-08-09T14:20:02-04:00Robert M. O'BaraAbility to set an operator's GUI Apply button properlyOnly is active when the operator's specification (attribute) is validOnly is active when the operator's specification (attribute) is validRobert M. O'BaraRobert M. O'Barahttps://gitlab.kitware.com/cmb/smtk/-/issues/54Edit Mode should not show up in Reshape Operator Panel2016-09-20T10:04:57-04:00Amanda HinesEdit Mode should not show up in Reshape Operator PanelYou should only be in modify mode when running the Edge Reshape operatorYou should only be in modify mode when running the Edge Reshape operatorYumin YuanYumin Yuanhttps://gitlab.kitware.com/cmb/smtk/-/issues/50Dem Extraction creates invisible model edges2017-02-10T10:49:21-05:00Robert M. O'BaraDem Extraction creates invisible model edgesLoad in LeJune Dem, extract at 0 with edge length set 5Load in LeJune Dem, extract at 0 with edge length set 5David ThompsonDavid Thompsonhttps://gitlab.kitware.com/cmb/smtk/-/issues/49Multiple outer loops result in spurious additional model face2016-10-04T17:24:33-04:00David ThompsonMultiple outer loops result in spurious additional model faceThe "create faces" (Faces – Create All) operator creates a "face" out of all the outer loops when there are multiple components.The "create faces" (Faces – Create All) operator creates a "face" out of all the outer loops when there are multiple components.David ThompsonDavid Thompson