Skip to content
GitLab
Commit 93c0384f authored by Bill Hoffman's avatar Bill Hoffman
Browse files

ENH: use new covbr that does not stop on error

parent 0ddc9f62
Hide whitespace changes
Inline Side-by-side
Source/CTest/cmCTestCoverageHandler.cxx
View file @ 93c0384f
......@@ -37,6 +37,7 @@ public:
{
this->Process = cmsysProcess_New();
this->PipeState = -1;
this->TimeOut = -1;
}
~cmCTestRunProcess()
{
......@@ -55,7 +56,10 @@ public:
}
void AddArgument(const char* arg)
{
this->CommandLineStrings.push_back(arg);
if(arg)
{
this->CommandLineStrings.push_back(arg);
}
}
void SetWorkingDirectory(const char* dir)
{
......@@ -326,6 +330,18 @@ int cmCTestCoverageHandler::ProcessHandler()
cont.BinaryDir = binaryDir;
cont.OFS = &ofs;
// setup the regex exclude stuff
this->CustomCoverageExcludeRegex.empty();
std::vector<cmStdString>::iterator rexIt;
for ( rexIt = this->CustomCoverageExclude.begin();
rexIt != this->CustomCoverageExclude.end();
++ rexIt )
{
this->CustomCoverageExcludeRegex.push_back(
cmsys::RegularExpression(rexIt->c_str()));
}
if(this->HandleBullseyeCoverage(&cont))
{
return cont.Error;
......@@ -665,16 +681,6 @@ int cmCTestCoverageHandler::HandleGCovCoverage(
cmSystemTools::MakeDirectory(tempDir.c_str());
cmSystemTools::ChangeDirectory(tempDir.c_str());
this->CustomCoverageExcludeRegex.empty();
std::vector<cmStdString>::iterator rexIt;
for ( rexIt = this->CustomCoverageExclude.begin();
rexIt != this->CustomCoverageExclude.end();
++ rexIt )
{
this->CustomCoverageExcludeRegex.push_back(
cmsys::RegularExpression(rexIt->c_str()));
}
int gcovStyle = 0;
std::set<std::string> missingFiles;
......@@ -1176,10 +1182,11 @@ namespace
" * The slash / means this probe is excluded from summary results. ",
0};
}
//----------------------------------------------------------------------
int cmCTestCoverageHandler::RunBullseyeCoverageBranch(
cmCTestCoverageHandlerContainer* cont,
std::set<cmStdString>& coveredFileNames,
std::vector<std::string>& files,
std::vector<std::string>& filesFullPath)
{
......@@ -1196,67 +1203,125 @@ int cmCTestCoverageHandler::RunBullseyeCoverageBranch(
{
return -1;
}
int count =0; // keep count of the number of files
// loop over all files
// for each file run covbr on that file to get the coverage
// information for that file
std::string outputFile;
cmCTestLog(this->CTest, HANDLER_VERBOSE_OUTPUT,
"run covbr: "
<< std::endl);
if(!this->RunBullseyeCommand(cont, "covbr", 0, outputFile))
{
cmCTestLog(this->CTest, ERROR_MESSAGE, "error running covbr for." << "\n");
return -1;
}
cmCTestLog(this->CTest, HANDLER_VERBOSE_OUTPUT,
"covbr output in " << outputFile
<< std::endl);
// open the output file
std::ifstream fin(outputFile.c_str());
if(!fin)
{
cmCTestLog(this->CTest, ERROR_MESSAGE,
"Cannot open coverage file: " <<
outputFile.c_str() << std::endl);
return 0;
}
std::map<cmStdString, cmStdString> fileMap;
std::vector<std::string>::iterator fp = filesFullPath.begin();
for(std::vector<std::string>::iterator f = files.begin();
for(std::vector<std::string>::iterator f = files.begin();
f != files.end(); ++f, ++fp)
{
// only allow 100 files in each log file
if ( count != 0 && count % 100 == 0 )
fileMap[*f] = *fp;
}
int count =0; // keep count of the number of files
// Now parse each line from the bullseye cov log file
std::string lineIn;
bool valid = false; // are we in a valid output file
int line = 0; // line of the current file
cmStdString file;
while(cmSystemTools::GetLineFromStream(fin, lineIn))
{
bool startFile = false;
if(lineIn.size() > 1 && lineIn[lineIn.size()-1] == ':')
{
this->EndCoverageLogFile(covLogFile, logFileCount);
logFileCount ++;
if ( !this->StartCoverageLogFile(covLogFile, logFileCount) )
file = lineIn.substr(0, lineIn.size()-1);
if(coveredFileNames.find(file) != coveredFileNames.end())
{
return -1;
startFile = true;
}
}
// for each file run covbr on that file to get the coverage
// information for that file
std::string outputFile;
if(!this->RunBullseyeCommand(cont, "covbr", f->c_str(), outputFile))
{
cmCTestLog(this->CTest, ERROR_MESSAGE, "error running covbr for:" <<
f->c_str() << "\n");
continue;
}
// open the output file
std::ifstream fin(outputFile.c_str());
if(!fin)
{
cmCTestLog(this->CTest, ERROR_MESSAGE,
"Cannot open coverage file: " <<
outputFile.c_str() << std::endl);
return 0;
}
// we have good data so we can count it
count++;
// start the file output
covLogFile << "\t<File Name=\""
<< this->CTest->MakeXMLSafe(f->c_str())
<< "\" FullPath=\"" << this->CTest->MakeXMLSafe(
this->CTest->GetShortPathToFile(
fp->c_str())) << "\">" << std::endl
<< "\t\t<Report>" << std::endl;
// write the bullseye header
int line =0;
for(int k =0; bullseyeHelp[k] != 0; ++k)
if(startFile)
{
covLogFile << "\t\t<Line Number=\"" << line << "\" Count=\"-1\">"
<< this->CTest->MakeXMLSafe(bullseyeHelp[k])
<< "</Line>" << std::endl;
line++;
// if we are in a valid file close it because a new one started
if(valid)
{
covLogFile << "\t\t</Report>" << std::endl
<< "\t</File>" << std::endl;
}
// only allow 100 files in each log file
if ( count != 0 && count % 100 == 0 )
{
cmCTestLog(this->CTest, HANDLER_VERBOSE_OUTPUT,
"start a new log file: "
<< count
<< std::endl);
this->EndCoverageLogFile(covLogFile, logFileCount);
logFileCount ++;
if ( !this->StartCoverageLogFile(covLogFile, logFileCount) )
{
return -1;
}
count++; // move on one
}
std::map<cmStdString, cmStdString>::iterator
i = fileMap.find(file);
// if the file should be covered write out the header for that file
if(i != fileMap.end())
{
// we have a new file so count it in the output
count++;
cmCTestLog(this->CTest, HANDLER_VERBOSE_OUTPUT,
"Produce coverage for file: "
<< file.c_str() << " " << count
<< std::endl);
// start the file output
covLogFile << "\t<File Name=\""
<< this->CTest->MakeXMLSafe(file.c_str())
<< "\" FullPath=\"" << this->CTest->MakeXMLSafe(
this->CTest->GetShortPathToFile(
i->second.c_str())) << "\">" << std::endl
<< "\t\t<Report>" << std::endl;
// write the bullseye header
line =0;
for(int k =0; bullseyeHelp[k] != 0; ++k)
{
covLogFile << "\t\t<Line Number=\"" << line << "\" Count=\"-1\">"
<< this->CTest->MakeXMLSafe(bullseyeHelp[k])
<< "</Line>" << std::endl;
line++;
}
valid = true; // we are in a valid file section
}
else
{
// this is not a file that we want coverage for
valid = false;
}
}
// Now copy each line from the bullseye file into the cov log file
std::string lineIn;
while(cmSystemTools::GetLineFromStream(fin, lineIn))
// we are not at a start file, and we are in a valid file output the line
else if(valid)
{
covLogFile << "\t\t<Line Number=\"" << line << "\" Count=\"-1\">"
<< this->CTest->MakeXMLSafe(lineIn.c_str())
<< "</Line>" << std::endl;
line++;
}
}
// if we ran out of lines a valid file then close that file
if(valid)
{
covLogFile << "\t\t</Report>" << std::endl
<< "\t</File>" << std::endl;
}
......@@ -1277,18 +1342,26 @@ int cmCTestCoverageHandler::RunBullseyeCommand(
cmCTestLog(this->CTest, ERROR_MESSAGE, "Cannot find :" << cmd << "\n");
return 0;
}
cmCTestLog(this->CTest, HANDLER_VERBOSE_OUTPUT,
"Run : " << program.c_str() << " " << arg << "\n");
if(arg)
{
cmCTestLog(this->CTest, HANDLER_VERBOSE_OUTPUT,
"Run : " << program.c_str() << " " << arg << "\n");
}
else
{
cmCTestLog(this->CTest, HANDLER_VERBOSE_OUTPUT,
"Run : " << program.c_str() << "\n");
}
// create a process object and start it
cmCTestRunProcess runCoverageSrc;
runCoverageSrc.SetCommand(program.c_str());
runCoverageSrc.AddArgument(arg);
std::string stdoutFile = cont->BinaryDir + "/Testing/Temporary/";
stdoutFile += this->GetCTestInstance()->GetCurrentTag();
stdoutFile + "-";
stdoutFile += "-";
stdoutFile += cmd;
std::string stderrFile = stdoutFile;
stdoutFile + ".stdout";
stdoutFile += ".stdout";
stderrFile += ".stderr";
runCoverageSrc.SetStdoutFile(stdoutFile.c_str());
runCoverageSrc.SetStderrFile(stderrFile.c_str());
......@@ -1363,6 +1436,7 @@ int cmCTestCoverageHandler::RunBullseyeSourceSummary(
outputFile.c_str() << std::endl);
return 0;
}
std::set<cmStdString> coveredFileNames;
while(cmSystemTools::GetLineFromStream(fin, stdline))
{
// if we have a line of output from stdout
......@@ -1383,6 +1457,7 @@ int cmCTestCoverageHandler::RunBullseyeSourceSummary(
continue;
}
std::string file = sourceFile;
coveredFileNames.insert(file);
if(!cmSystemTools::FileIsFullPath(sourceFile.c_str()))
{
// file will be relative to the binary dir
......@@ -1478,6 +1553,7 @@ int cmCTestCoverageHandler::RunBullseyeSourceSummary(
this->CTest->EndXML(covSumFile);
// Now create the coverage information for each file
return this->RunBullseyeCoverageBranch(cont,
coveredFileNames,
coveredFiles,
coveredFilesFullPath);
}
......
Source/CTest/cmCTestCoverageHandler.h
View file @ 93c0384f
......@@ -63,6 +63,7 @@ private:
int HandleBullseyeCoverage(cmCTestCoverageHandlerContainer* cont);
int RunBullseyeSourceSummary(cmCTestCoverageHandlerContainer* cont);
int RunBullseyeCoverageBranch(cmCTestCoverageHandlerContainer* cont,
std::set<cmStdString>& coveredFileNames,
std::vector<std::string>& files,
std::vector<std::string>& filesFullPath);
int RunBullseyeCommand(
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment