/*=========================================================================

  Program:   Visualization Toolkit
  Module:    vtkMapper.h

  Copyright (c) Ken Martin, Will Schroeder, Bill Lorensen
  All rights reserved.
  See Copyright.txt or http://www.kitware.com/Copyright.htm for details.

     This software is distributed WITHOUT ANY WARRANTY; without even
     the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
     PURPOSE.  See the above copyright notice for more information.

=========================================================================*/
// .NAME vtkMapper - abstract class specifies interface to map data to graphics primitives
// .SECTION Description
// vtkMapper is an abstract class to specify interface between data and
// graphics primitives. Subclasses of vtkMapper map data through a
// lookuptable and control the creation of rendering primitives that
// interface to the graphics library. The mapping can be controlled by
// supplying a lookup table and specifying a scalar range to map data
// through.
//
// There are several important control mechanisms affecting the behavior of
// this object. The ScalarVisibility flag controls whether scalar data (if
// any) controls the color of the associated actor(s) that refer to the
// mapper. The ScalarMode ivar is used to determine whether scalar point data
// or cell data is used to color the object. By default, point data scalars
// are used unless there are none, in which cell scalars are used. Or you can
// explicitly control whether to use point or cell scalar data. Finally, the
// mapping of scalars through the lookup table varies depending on the
// setting of the ColorMode flag. See the documentation for the appropriate
// methods for an explanation.
//
// Another important feature of this class is whether to use immediate mode
// rendering (ImmediateModeRenderingOn) or display list rendering
// (ImmediateModeRenderingOff). If display lists are used, a data structure
// is constructed (generally in the rendering library) which can then be
// rapidly traversed and rendered by the rendering library. The disadvantage
// of display lists is that they require additionally memory which may affect
// the performance of the system.
//
// Another important feature of the mapper is the ability to shift the
// z-buffer to resolve coincident topology. For example, if you'd like to
// draw a mesh with some edges a different color, and the edges lie on the
// mesh, this feature can be useful to get nice looking lines. (See the
// ResolveCoincidentTopology-related methods.)

// .SECTION See Also
// vtkDataSetMapper vtkPolyDataMapper

#ifndef vtkMapper_h
#define vtkMapper_h

#include "vtkRenderingCoreModule.h" // For export macro
#include "vtkAbstractMapper3D.h"
#include "vtkSystemIncludes.h" // For VTK_COLOR_MODE_DEFAULT and _MAP_SCALARS
#include "vtkSmartPointer.h" // needed for vtkSmartPointer.

#define VTK_RESOLVE_OFF 0
#define VTK_RESOLVE_POLYGON_OFFSET 1
#define VTK_RESOLVE_SHIFT_ZBUFFER 2

#define VTK_GET_ARRAY_BY_ID 0
#define VTK_GET_ARRAY_BY_NAME 1

#define VTK_MATERIALMODE_DEFAULT  0
#define VTK_MATERIALMODE_AMBIENT  1
#define VTK_MATERIALMODE_DIFFUSE  2
#define VTK_MATERIALMODE_AMBIENT_AND_DIFFUSE  3

class vtkWindow;
class vtkRenderer;
class vtkActor;
class vtkDataSet;
class vtkFloatArray;
class vtkImageData;
class vtkScalarsToColors;
class vtkUnsignedCharArray;

class VTKRENDERINGCORE_EXPORT vtkMapper : public vtkAbstractMapper3D
{
public:
  vtkTypeMacro(vtkMapper, vtkAbstractMapper3D);
  void PrintSelf(ostream& os, vtkIndent indent);

  // Description:
  // Make a shallow copy of this mapper.
  void ShallowCopy(vtkAbstractMapper *m);

  // Description:
  // Overload standard modified time function. If lookup table is modified,
  // then this object is modified as well.
  unsigned long GetMTime();

  // Description:
  // Method initiates the mapping process. Generally sent by the actor
  // as each frame is rendered.
  virtual void Render(vtkRenderer *ren, vtkActor *a) = 0;

  // Description:
  // Release any graphics resources that are being consumed by this mapper.
  // The parameter window could be used to determine which graphic
  // resources to release.
  virtual void ReleaseGraphicsResources(vtkWindow *) {}

  // Description:
  // Specify a lookup table for the mapper to use.
  void SetLookupTable(vtkScalarsToColors *lut);
  vtkScalarsToColors *GetLookupTable();

  // Description:
  // Create default lookup table. Generally used to create one when none
  // is available with the scalar data.
  virtual void CreateDefaultLookupTable();

  // Description:
  // Turn on/off flag to control whether scalar data is used to color objects.
  vtkSetMacro(ScalarVisibility, int);
  vtkGetMacro(ScalarVisibility, int);
  vtkBooleanMacro(ScalarVisibility, int);

  // Description:
  // Turn on/off flag to control whether the mapper's data is static. Static data
  // means that the mapper does not propagate updates down the pipeline, greatly
  // decreasing the time it takes to update many mappers. This should only be
  // used if the data never changes.
  vtkSetMacro(Static, int);
  vtkGetMacro(Static, int);
  vtkBooleanMacro(Static, int);

  // Description: Control how the scalar data is mapped to colors.  By
  // default (ColorModeToDefault), unsigned char scalars are treated
  // as colors, and NOT mapped through the lookup table, while
  // everything else is.  ColorModeToDirectScalar extends
  // ColorModeToDefault such that all integer types are treated as
  // colors with values in the range 0-255 and floating types are
  // treated as colors with values in the range 0.0-1.0.  Setting
  // ColorModeToMapScalars means that all scalar data will be mapped
  // through the lookup table.  (Note that for multi-component
  // scalars, the particular component to use for mapping can be
  // specified using the SelectColorArray() method.)
  vtkSetMacro(ColorMode, int);
  vtkGetMacro(ColorMode, int);
  void SetColorModeToDefault()
    { this->SetColorMode(VTK_COLOR_MODE_DEFAULT); }
  void SetColorModeToMapScalars()
    { this->SetColorMode(VTK_COLOR_MODE_MAP_SCALARS); }
  void SetColorModeToDirectScalars()
  { this->SetColorMode(VTK_COLOR_MODE_DIRECT_SCALARS); }

  // Description:
  // Return the method of coloring scalar data.
  const char *GetColorModeAsString();

  // Description:
  // By default, vertex color is used to map colors to a surface.
  // Colors are interpolated after being mapped.
  // This option avoids color interpolation by using a one dimensional
  // texture map for the colors.
  vtkSetMacro(InterpolateScalarsBeforeMapping, int);
  vtkGetMacro(InterpolateScalarsBeforeMapping, int);
  vtkBooleanMacro(InterpolateScalarsBeforeMapping, int);

  // Description:
  // Control whether the mapper sets the lookuptable range based on its
  // own ScalarRange, or whether it will use the LookupTable ScalarRange
  // regardless of it's own setting. By default the Mapper is allowed to set
  // the LookupTable range, but users who are sharing LookupTables between
  // mappers/actors will probably wish to force the mapper to use the
  // LookupTable unchanged.
  vtkSetMacro(UseLookupTableScalarRange, int);
  vtkGetMacro(UseLookupTableScalarRange, int);
  vtkBooleanMacro(UseLookupTableScalarRange, int);

  // Description:
  // Specify range in terms of scalar minimum and maximum (smin,smax). These
  // values are used to map scalars into lookup table. Has no effect when
  // UseLookupTableScalarRange is true.
  vtkSetVector2Macro(ScalarRange, double);
  vtkGetVectorMacro(ScalarRange, double, 2);

  // Description:
  // Turn on/off flag to control whether data is rendered using
  // immediate mode or note. Immediate mode rendering
  // tends to be slower but it can handle larger datasets.
  // The default value is immediate mode off. If you are
  // having problems rendering a large dataset you might
  // want to consider using immediate more rendering.
  vtkSetMacro(ImmediateModeRendering, int);
  vtkGetMacro(ImmediateModeRendering, int);
  vtkBooleanMacro(ImmediateModeRendering, int);

  // Description:
  // Turn on/off flag to control whether data is rendered using
  // immediate mode or note. Immediate mode rendering
  // tends to be slower but it can handle larger datasets.
  // The default value is immediate mode off. If you are
  // having problems rendering a large dataset you might
  // want to consider using immediate more rendering.
  static void SetGlobalImmediateModeRendering(int val);
  static void GlobalImmediateModeRenderingOn()
    { vtkMapper::SetGlobalImmediateModeRendering(1); }
  static void GlobalImmediateModeRenderingOff()
    { vtkMapper::SetGlobalImmediateModeRendering(0); }
  static int  GetGlobalImmediateModeRendering();

  //BTX
  // Description:
  // Force compile only mode in case display lists are used
  // (ImmediateModeRendering is false). If ImmediateModeRendering is true,
  // no rendering happens. Changing the value of this flag does not change
  // modified time of the mapper. Initial value is false.
  // This can be used by another rendering class which also uses display lists
  // (call of display lists can be nested but not their creation.)
  // There is no good reason to expose it to wrappers.
  vtkGetMacro(ForceCompileOnly, int);
  void SetForceCompileOnly(int value);
  //ETX

  // Description:
  // Control how the filter works with scalar point data and cell attribute
  // data.  By default (ScalarModeToDefault), the filter will use point data,
  // and if no point data is available, then cell data is used. Alternatively
  // you can explicitly set the filter to use point data
  // (ScalarModeToUsePointData) or cell data (ScalarModeToUseCellData).
  // You can also choose to get the scalars from an array in point field
  // data (ScalarModeToUsePointFieldData) or cell field data
  // (ScalarModeToUseCellFieldData).  If scalars are coming from a field
  // data array, you must call SelectColorArray before you call
  // GetColors.

  // When ScalarMode is set to use Field Data (ScalarModeToFieldData),
  // you must call SelectColorArray to choose the field data array to
  // be used to color cells. In this mode, the default behavior is to
  // treat the field data tuples as being associated with cells. If
  // the poly data contains triangle strips, the array is expected to
  // contain the cell data for each mini-cell formed by any triangle
  // strips in the poly data as opposed to treating them as a single
  // tuple that applies to the entire strip.  This mode can also be
  // used to color the entire poly data by a single color obtained by
  // mapping the tuple at a given index in the field data array
  // through the color map. Use SetFieldDataTupleId() to specify
  // the tuple index.
  vtkSetMacro(ScalarMode, int);
  vtkGetMacro(ScalarMode, int);
  void SetScalarModeToDefault()
    { this->SetScalarMode(VTK_SCALAR_MODE_DEFAULT); }
  void SetScalarModeToUsePointData()
    { this->SetScalarMode(VTK_SCALAR_MODE_USE_POINT_DATA); }
  void SetScalarModeToUseCellData()
    { this->SetScalarMode(VTK_SCALAR_MODE_USE_CELL_DATA); }
  void SetScalarModeToUsePointFieldData()
    { this->SetScalarMode(VTK_SCALAR_MODE_USE_POINT_FIELD_DATA); }
  void SetScalarModeToUseCellFieldData()
    { this->SetScalarMode(VTK_SCALAR_MODE_USE_CELL_FIELD_DATA); }
  void SetScalarModeToUseFieldData()
    { this->SetScalarMode(VTK_SCALAR_MODE_USE_FIELD_DATA); }

  // Description:
  // When ScalarMode is set to UsePointFieldData or UseCellFieldData,
  // you can specify which array to use for coloring using these methods.
  // The lookup table will decide how to convert vectors to colors.
  void SelectColorArray(int arrayNum);
  void SelectColorArray(const char* arrayName);

  // Description:

  // When ScalarMode is set to UseFieldData, set the index of the
  // tuple by which to color the entire data set. By default, the
  // index is -1, which means to treat the field data array selected
  // with SelectColorArray as having a scalar value for each cell.
  // Indices of 0 or higher mean to use the tuple at the given index
  // for coloring the entire data set.
  vtkSetMacro(FieldDataTupleId, vtkIdType);
  vtkGetMacro(FieldDataTupleId, vtkIdType);

  // Description:
  // Legacy:
  // These methods used to be used to specify the array component.
  // It is better to do this in the lookup table.
  void ColorByArrayComponent(int arrayNum, int component);
  void ColorByArrayComponent(const char* arrayName, int component);

  // Description:
  // Get the array name or number and component to color by.
  char* GetArrayName() { return this->ArrayName; }
  int GetArrayId() { return this->ArrayId; }
  int GetArrayAccessMode() { return this->ArrayAccessMode; }
  int GetArrayComponent() { return this->ArrayComponent; }

  // Description:
  // Return the method for obtaining scalar data.
  const char *GetScalarModeAsString();

  // Description:
  // Set/Get a global flag that controls whether coincident topology (e.g., a
  // line on top of a polygon) is shifted to avoid z-buffer resolution (and
  // hence rendering problems). If not off, there are two methods to choose
  // from. PolygonOffset uses graphics systems calls to shift polygons, but
  // does not distinguish vertices and lines from one another. ShiftZBuffer
  // remaps the z-buffer to distinguish vertices, lines, and polygons, but
  // does not always produce acceptable results. If you use the ShiftZBuffer
  // approach, you may also want to set the ResolveCoincidentTopologyZShift
  // value. (Note: not all mappers/graphics systems implement this
  // functionality.)
  static void SetResolveCoincidentTopology(int val);
  static int  GetResolveCoincidentTopology();
  static void SetResolveCoincidentTopologyToDefault();
  static void SetResolveCoincidentTopologyToOff()
    { SetResolveCoincidentTopology(VTK_RESOLVE_OFF) ;}
  static void SetResolveCoincidentTopologyToPolygonOffset()
    { SetResolveCoincidentTopology(VTK_RESOLVE_POLYGON_OFFSET); }
  static void SetResolveCoincidentTopologyToShiftZBuffer()
    { SetResolveCoincidentTopology(VTK_RESOLVE_SHIFT_ZBUFFER); }

  // Description:
  // Used to set the polygon offset scale factor and units.
  // Used when ResolveCoincidentTopology is set to PolygonOffset.
  // These are global variables.
  static void SetResolveCoincidentTopologyPolygonOffsetParameters(
    double factor, double units);
  static void GetResolveCoincidentTopologyPolygonOffsetParameters(
    double& factor, double& units);

  // Description:
  // Used when ResolveCoincidentTopology is set to PolygonOffset. The polygon
  // offset can be applied either to the solid polygonal faces or the
  // lines/vertices. When set (default), the offset is applied to the faces
  // otherwise it is applied to lines and vertices.
  // This is a global variable.
  static void SetResolveCoincidentTopologyPolygonOffsetFaces(int faces);
  static int GetResolveCoincidentTopologyPolygonOffsetFaces();

  // Description:
  // Used to set the z-shift if ResolveCoincidentTopology is set to
  // ShiftZBuffer. This is a global variable.
  static void SetResolveCoincidentTopologyZShift(double val);
  static double GetResolveCoincidentTopologyZShift();

  // Description:
  // Return bounding box (array of six doubles) of data expressed as
  // (xmin,xmax, ymin,ymax, zmin,zmax).
  virtual double *GetBounds();
  virtual void GetBounds(double bounds[6])
    { this->vtkAbstractMapper3D::GetBounds(bounds); }

  // Description:
  // This instance variable is used by vtkLODActor to determine which
  // mapper to use.  It is an estimate of the time necessary to render.
  // Setting the render time does not modify the mapper.
  void SetRenderTime(double time) {this->RenderTime = time;}
  vtkGetMacro(RenderTime, double);

  //BTX
  // Description:
  // Get the input as a vtkDataSet.  This method is overridden in
  // the specialized mapper classes to return more specific data types.
  vtkDataSet *GetInput();
  //ETX

  // Description:
  // Get the input to this mapper as a vtkDataSet, instead of as a
  // more specialized data type that the subclass may return from
  // GetInput().  This method is provided for use in the wrapper languages,
  // C++ programmers should use GetInput() instead.
  vtkDataSet *GetInputAsDataSet()
    { return this->GetInput(); }

  // Description:
  // Map the scalars (if there are any scalars and ScalarVisibility is on)
  // through the lookup table, returning an unsigned char RGBA array. This is
  // typically done as part of the rendering process. The alpha parameter
  // allows the blending of the scalars with an additional alpha (typically
  // which comes from a vtkActor, etc.)
  virtual vtkUnsignedCharArray *MapScalars(double alpha);
  virtual vtkUnsignedCharArray *MapScalars(vtkDataSet *input,
                                           double alpha);

  // Description:
  // Set/Get the light-model color mode.
  vtkSetMacro(ScalarMaterialMode,int);
  vtkGetMacro(ScalarMaterialMode,int);
  void SetScalarMaterialModeToDefault()
    { this->SetScalarMaterialMode(VTK_MATERIALMODE_DEFAULT); }
  void SetScalarMaterialModeToAmbient()
    { this->SetScalarMaterialMode(VTK_MATERIALMODE_AMBIENT); }
  void SetScalarMaterialModeToDiffuse()
    { this->SetScalarMaterialMode(VTK_MATERIALMODE_DIFFUSE); }
  void SetScalarMaterialModeToAmbientAndDiffuse()
    { this->SetScalarMaterialMode(VTK_MATERIALMODE_AMBIENT_AND_DIFFUSE); }

  // Description:
  // Return the light-model color mode.
  const char *GetScalarMaterialModeAsString();

  // Description:
  // Returns if the mapper does not expect to have translucent geometry. This
  // may happen when using ColorMode is set to not map scalars i.e. render the
  // scalar array directly as colors and the scalar array has opacity i.e. alpha
  // component.  Default implementation simply returns true. Note that even if
  // this method returns true, an actor may treat the geometry as translucent
  // since a constant translucency is set on the property, for example.
  virtual bool GetIsOpaque();

  // Description:
  // WARNING: INTERNAL METHOD - NOT INTENDED FOR GENERAL USE
  // DO NOT USE THIS METHOD OUTSIDE OF THE RENDERING PROCESS
  // Used by vtkHardwareSelector to determine if the prop supports hardware
  // selection.
  virtual bool GetSupportsSelection()
    { return false; }

  // Description:
  // Returns if we can use texture maps for scalar coloring. Note this doesn't
  // say we "will" use scalar coloring. It says, if we do use scalar coloring,
  // we will use a texture.
  // When rendering multiblock datasets, if any 2 blocks provide different
  // lookup tables for the scalars, then also we cannot use textures. This case
  // can be handled if required.
  virtual int CanUseTextureMapForColoring(vtkDataObject* input);

protected:
  vtkMapper();
  ~vtkMapper();

  vtkUnsignedCharArray *Colors;

  // Use texture coordinates for coloring.
  int InterpolateScalarsBeforeMapping;
  // Coordinate for each point.
  vtkFloatArray *ColorCoordinates;
  // 1D ColorMap used for the texture image.
  vtkImageData* ColorTextureMap;
  void MapScalarsToTexture(vtkAbstractArray* scalars, double alpha);

  vtkScalarsToColors *LookupTable;
  int ScalarVisibility;
  vtkTimeStamp BuildTime;
  double ScalarRange[2];
  int UseLookupTableScalarRange;
  int ImmediateModeRendering;
  int ColorMode;
  int ScalarMode;
  int ScalarMaterialMode;

  double RenderTime;

  // for coloring by a component of a field data array
  int ArrayId;
  char ArrayName[256];
  int ArrayComponent;
  int ArrayAccessMode;

  // If coloring by field data, which tuple to use to color the entire
  // data set. If -1, treat array values as cell data.
  vtkIdType FieldDataTupleId;

  int Static;

  int ForceCompileOnly;

private:
  vtkMapper(const vtkMapper&);  // Not implemented.
  void operator=(const vtkMapper&);  // Not implemented.
};

#endif
